netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Davide Caratti <dcaratti@redhat.com>
To: lkp@intel.com
Cc: davem@davemloft.net, dcaratti@redhat.com,
	john.hurley@netronome.com, kbuild-all@01.org, lorenzo@kernel.org,
	netdev@vger.kernel.org, xiyou.wangcong@gmail.com,
	Simon Horman <simon.horman@netronome.com>
Subject: [PATCH net v2 2/2] net/sched: fix corrupted L2 header with MPLS 'push' and 'pop' actions
Date: Sat, 12 Oct 2019 13:55:07 +0200	[thread overview]
Message-ID: <e70f78e70bc071984aa17081878eae525c7bc64e.1570878412.git.dcaratti@redhat.com> (raw)
In-Reply-To: <cover.1570878412.git.dcaratti@redhat.com>

the following script:

 # tc qdisc add dev eth0 clsact
 # tc filter add dev eth0 egress protocol ip matchall \
 > action mpls push protocol mpls_uc label 0x355aa bos 1

causes corruption of all IP packets transmitted by eth0. On TC egress, we
can't rely on the value of skb->mac_len, because it's 0 and a MPLS 'push'
operation will result in an overwrite of the first 4 octets in the packet
L2 header (e.g. the Destination Address if eth0 is an Ethernet); the same
error pattern is present also in the MPLS 'pop' operation. Fix this error
in act_mpls data plane, computing 'mac_len' as the difference between the
network header and the mac header (when not at TC ingress), and use it in
MPLS 'push'/'pop' core functions.

v2: unbreak 'make htmldocs' because of missing documentation of 'mac_len'
    in skb_mpls_pop(), reported by kbuild test robot

CC: Lorenzo Bianconi <lorenzo@kernel.org>
Fixes: 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC")
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
---
 include/linux/skbuff.h    |  5 +++--
 net/core/skbuff.c         | 19 +++++++++++--------
 net/openvswitch/actions.c |  5 +++--
 net/sched/act_mpls.c      | 12 ++++++++----
 4 files changed, 25 insertions(+), 16 deletions(-)

diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 4351577b14d7..7914fdaf4226 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -3510,8 +3510,9 @@ int skb_ensure_writable(struct sk_buff *skb, int write_len);
 int __skb_vlan_pop(struct sk_buff *skb, u16 *vlan_tci);
 int skb_vlan_pop(struct sk_buff *skb);
 int skb_vlan_push(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci);
-int skb_mpls_push(struct sk_buff *skb, __be32 mpls_lse, __be16 mpls_proto);
-int skb_mpls_pop(struct sk_buff *skb, __be16 next_proto);
+int skb_mpls_push(struct sk_buff *skb, __be32 mpls_lse, __be16 mpls_proto,
+		  int mac_len);
+int skb_mpls_pop(struct sk_buff *skb, __be16 next_proto, int mac_len);
 int skb_mpls_update_lse(struct sk_buff *skb, __be32 mpls_lse);
 int skb_mpls_dec_ttl(struct sk_buff *skb);
 struct sk_buff *pskb_extract(struct sk_buff *skb, int off, int to_copy,
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index cd59ccd6da57..c81b59177859 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -5477,12 +5477,14 @@ static void skb_mod_eth_type(struct sk_buff *skb, struct ethhdr *hdr,
  * @skb: buffer
  * @mpls_lse: MPLS label stack entry to push
  * @mpls_proto: ethertype of the new MPLS header (expects 0x8847 or 0x8848)
+ * @mac_len: length of the MAC header
  *
  * Expects skb->data at mac header.
  *
  * Returns 0 on success, -errno otherwise.
  */
-int skb_mpls_push(struct sk_buff *skb, __be32 mpls_lse, __be16 mpls_proto)
+int skb_mpls_push(struct sk_buff *skb, __be32 mpls_lse, __be16 mpls_proto,
+		  int mac_len)
 {
 	struct mpls_shim_hdr *lse;
 	int err;
@@ -5499,15 +5501,15 @@ int skb_mpls_push(struct sk_buff *skb, __be32 mpls_lse, __be16 mpls_proto)
 		return err;
 
 	if (!skb->inner_protocol) {
-		skb_set_inner_network_header(skb, skb->mac_len);
+		skb_set_inner_network_header(skb, mac_len);
 		skb_set_inner_protocol(skb, skb->protocol);
 	}
 
 	skb_push(skb, MPLS_HLEN);
 	memmove(skb_mac_header(skb) - MPLS_HLEN, skb_mac_header(skb),
-		skb->mac_len);
+		mac_len);
 	skb_reset_mac_header(skb);
-	skb_set_network_header(skb, skb->mac_len);
+	skb_set_network_header(skb, mac_len);
 
 	lse = mpls_hdr(skb);
 	lse->label_stack_entry = mpls_lse;
@@ -5526,29 +5528,30 @@ EXPORT_SYMBOL_GPL(skb_mpls_push);
  *
  * @skb: buffer
  * @next_proto: ethertype of header after popped MPLS header
+ * @mac_len: length of the MAC header
  *
  * Expects skb->data at mac header.
  *
  * Returns 0 on success, -errno otherwise.
  */
-int skb_mpls_pop(struct sk_buff *skb, __be16 next_proto)
+int skb_mpls_pop(struct sk_buff *skb, __be16 next_proto, int mac_len)
 {
 	int err;
 
 	if (unlikely(!eth_p_mpls(skb->protocol)))
 		return 0;
 
-	err = skb_ensure_writable(skb, skb->mac_len + MPLS_HLEN);
+	err = skb_ensure_writable(skb, mac_len + MPLS_HLEN);
 	if (unlikely(err))
 		return err;
 
 	skb_postpull_rcsum(skb, mpls_hdr(skb), MPLS_HLEN);
 	memmove(skb_mac_header(skb) + MPLS_HLEN, skb_mac_header(skb),
-		skb->mac_len);
+		mac_len);
 
 	__skb_pull(skb, MPLS_HLEN);
 	skb_reset_mac_header(skb);
-	skb_set_network_header(skb, skb->mac_len);
+	skb_set_network_header(skb, mac_len);
 
 	if (skb->dev && skb->dev->type == ARPHRD_ETHER) {
 		struct ethhdr *hdr;
diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c
index 3572e11b6f21..1c77f520f474 100644
--- a/net/openvswitch/actions.c
+++ b/net/openvswitch/actions.c
@@ -165,7 +165,8 @@ static int push_mpls(struct sk_buff *skb, struct sw_flow_key *key,
 {
 	int err;
 
-	err = skb_mpls_push(skb, mpls->mpls_lse, mpls->mpls_ethertype);
+	err = skb_mpls_push(skb, mpls->mpls_lse, mpls->mpls_ethertype,
+			    skb->mac_len);
 	if (err)
 		return err;
 
@@ -178,7 +179,7 @@ static int pop_mpls(struct sk_buff *skb, struct sw_flow_key *key,
 {
 	int err;
 
-	err = skb_mpls_pop(skb, ethertype);
+	err = skb_mpls_pop(skb, ethertype, skb->mac_len);
 	if (err)
 		return err;
 
diff --git a/net/sched/act_mpls.c b/net/sched/act_mpls.c
index e168df0e008a..4cf6c553bb0b 100644
--- a/net/sched/act_mpls.c
+++ b/net/sched/act_mpls.c
@@ -55,7 +55,7 @@ static int tcf_mpls_act(struct sk_buff *skb, const struct tc_action *a,
 	struct tcf_mpls *m = to_mpls(a);
 	struct tcf_mpls_params *p;
 	__be32 new_lse;
-	int ret;
+	int ret, mac_len;
 
 	tcf_lastuse_update(&m->tcf_tm);
 	bstats_cpu_update(this_cpu_ptr(m->common.cpu_bstats), skb);
@@ -63,8 +63,12 @@ static int tcf_mpls_act(struct sk_buff *skb, const struct tc_action *a,
 	/* Ensure 'data' points at mac_header prior calling mpls manipulating
 	 * functions.
 	 */
-	if (skb_at_tc_ingress(skb))
+	if (skb_at_tc_ingress(skb)) {
 		skb_push_rcsum(skb, skb->mac_len);
+		mac_len = skb->mac_len;
+	} else {
+		mac_len = skb_network_header(skb) - skb_mac_header(skb);
+	}
 
 	ret = READ_ONCE(m->tcf_action);
 
@@ -72,12 +76,12 @@ static int tcf_mpls_act(struct sk_buff *skb, const struct tc_action *a,
 
 	switch (p->tcfm_action) {
 	case TCA_MPLS_ACT_POP:
-		if (skb_mpls_pop(skb, p->tcfm_proto))
+		if (skb_mpls_pop(skb, p->tcfm_proto, mac_len))
 			goto drop;
 		break;
 	case TCA_MPLS_ACT_PUSH:
 		new_lse = tcf_mpls_get_lse(NULL, p, !eth_p_mpls(skb->protocol));
-		if (skb_mpls_push(skb, new_lse, p->tcfm_proto))
+		if (skb_mpls_push(skb, new_lse, p->tcfm_proto, mac_len))
 			goto drop;
 		break;
 	case TCA_MPLS_ACT_MODIFY:
-- 
2.21.0


  parent reply	other threads:[~2019-10-12 11:57 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-12 11:55 [PATCH net v2 0/2] net/sched: fix wrong behavior of MPLS push/pop action Davide Caratti
2019-10-12 11:55 ` [PATCH net v2 1/2] net: avoid errors when trying to pop MLPS header on non-MPLS packets Davide Caratti
2019-10-12 11:55 ` Davide Caratti [this message]
2019-10-12 12:41 ` [PATCH net v2 0/2] net/sched: fix wrong behavior of MPLS push/pop action Simon Horman
2019-10-16  0:16 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e70f78e70bc071984aa17081878eae525c7bc64e.1570878412.git.dcaratti@redhat.com \
    --to=dcaratti@redhat.com \
    --cc=davem@davemloft.net \
    --cc=john.hurley@netronome.com \
    --cc=kbuild-all@01.org \
    --cc=lkp@intel.com \
    --cc=lorenzo@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=simon.horman@netronome.com \
    --cc=xiyou.wangcong@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).