netfilter-devel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Martin KaFai Lau <martin.lau@linux.dev>
To: Brad Cowie <brad@faucet.nz>
Cc: lorenzo@kernel.org, memxor@gmail.com, pablo@netfilter.org,
	davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
	ast@kernel.org, daniel@iogearbox.net, andrii@kernel.org,
	song@kernel.org, john.fastabend@gmail.com, sdf@google.com,
	jolsa@kernel.org, netfilter-devel@vger.kernel.org,
	coreteam@netfilter.org, netdev@vger.kernel.org,
	bpf@vger.kernel.org
Subject: Re: [PATCH bpf-next v2 2/2] selftests/bpf: Update tests for new ct zone opts for nf_conntrack kfuncs
Date: Thu, 25 Apr 2024 16:34:11 -0700	[thread overview]
Message-ID: <288b0d96-d5a8-4d81-9302-32b0d414a983@linux.dev> (raw)
In-Reply-To: <20240424030027.3932184-2-brad@faucet.nz>

On 4/23/24 8:00 PM, Brad Cowie wrote:
> Remove test for reserved options in bpf_ct_opts,
> which have been removed.
> 
> Add test for allocating and looking up ct entry in a
> non-default ct zone with kfuncs bpf_{xdp,skb}_ct_alloc
> and bpf_{xdp,skb}_ct_lookup.
> 
> Add negative test for looking up ct entry in a different
> ct zone to where it was allocated.
> 
> Signed-off-by: Brad Cowie <brad@faucet.nz>
> ---
> v1 -> v2:
>    - Separate test changes into different patch
>    - Add test for allocating/looking up entry in non-default ct zone
> ---
>   tools/testing/selftests/bpf/config            |  1 +
>   .../testing/selftests/bpf/prog_tests/bpf_nf.c |  6 +-
>   .../testing/selftests/bpf/progs/test_bpf_nf.c | 88 ++++++++++++++++---
>   3 files changed, 82 insertions(+), 13 deletions(-)
> 
> diff --git a/tools/testing/selftests/bpf/config b/tools/testing/selftests/bpf/config
> index afd675b1bf80..8d4110fe8d26 100644
> --- a/tools/testing/selftests/bpf/config
> +++ b/tools/testing/selftests/bpf/config
> @@ -75,6 +75,7 @@ CONFIG_NETFILTER_XT_TARGET_CT=y
>   CONFIG_NETKIT=y
>   CONFIG_NF_CONNTRACK=y
>   CONFIG_NF_CONNTRACK_MARK=y
> +CONFIG_NF_CONNTRACK_ZONES=y
>   CONFIG_NF_DEFRAG_IPV4=y
>   CONFIG_NF_DEFRAG_IPV6=y
>   CONFIG_NF_NAT=y
> diff --git a/tools/testing/selftests/bpf/prog_tests/bpf_nf.c b/tools/testing/selftests/bpf/prog_tests/bpf_nf.c
> index b30ff6b3b81a..853f694af6d4 100644
> --- a/tools/testing/selftests/bpf/prog_tests/bpf_nf.c
> +++ b/tools/testing/selftests/bpf/prog_tests/bpf_nf.c
> @@ -103,7 +103,6 @@ static void test_bpf_nf_ct(int mode)
>   		goto end;
>   
>   	ASSERT_EQ(skel->bss->test_einval_bpf_tuple, -EINVAL, "Test EINVAL for NULL bpf_tuple");
> -	ASSERT_EQ(skel->bss->test_einval_reserved, -EINVAL, "Test EINVAL for reserved not set to 0");
>   	ASSERT_EQ(skel->bss->test_einval_netns_id, -EINVAL, "Test EINVAL for netns_id < -1");
>   	ASSERT_EQ(skel->bss->test_einval_len_opts, -EINVAL, "Test EINVAL for len__opts != NF_BPF_CT_OPTS_SZ");
>   	ASSERT_EQ(skel->bss->test_eproto_l4proto, -EPROTO, "Test EPROTO for l4proto != TCP or UDP");
> @@ -122,6 +121,11 @@ static void test_bpf_nf_ct(int mode)
>   	ASSERT_EQ(skel->bss->test_exist_lookup_mark, 43, "Test existing connection lookup ctmark");
>   	ASSERT_EQ(skel->data->test_snat_addr, 0, "Test for source natting");
>   	ASSERT_EQ(skel->data->test_dnat_addr, 0, "Test for destination natting");
> +	ASSERT_EQ(skel->data->test_ct_zone_id_alloc_entry, 0, "Test for alloc new entry in specified ct zone");
> +	ASSERT_EQ(skel->data->test_ct_zone_id_insert_entry, 0, "Test for insert new entry in specified ct zone");
> +	ASSERT_EQ(skel->data->test_ct_zone_id_succ_lookup, 0, "Test for successful lookup in specified ct_zone");
> +	ASSERT_EQ(skel->bss->test_ct_zone_id_enoent_lookup, -ENOENT, "Test ENOENT for lookup in wrong ct zone");
> +
>   end:
>   	if (client_fd != -1)
>   		close(client_fd);
> diff --git a/tools/testing/selftests/bpf/progs/test_bpf_nf.c b/tools/testing/selftests/bpf/progs/test_bpf_nf.c
> index 77ad8adf68da..b47fa0708f1e 100644
> --- a/tools/testing/selftests/bpf/progs/test_bpf_nf.c
> +++ b/tools/testing/selftests/bpf/progs/test_bpf_nf.c
> @@ -12,7 +12,6 @@
>   extern unsigned long CONFIG_HZ __kconfig;
>   
>   int test_einval_bpf_tuple = 0;
> -int test_einval_reserved = 0;
>   int test_einval_netns_id = 0;
>   int test_einval_len_opts = 0;
>   int test_eproto_l4proto = 0;
> @@ -22,6 +21,10 @@ int test_eafnosupport = 0;
>   int test_alloc_entry = -EINVAL;
>   int test_insert_entry = -EAFNOSUPPORT;
>   int test_succ_lookup = -ENOENT;
> +int test_ct_zone_id_alloc_entry = -EINVAL;
> +int test_ct_zone_id_insert_entry = -EAFNOSUPPORT;
> +int test_ct_zone_id_succ_lookup = -ENOENT;
> +int test_ct_zone_id_enoent_lookup = 0;
>   u32 test_delta_timeout = 0;
>   u32 test_status = 0;
>   u32 test_insert_lookup_mark = 0;
> @@ -45,7 +48,10 @@ struct bpf_ct_opts___local {
>   	s32 netns_id;
>   	s32 error;
>   	u8 l4proto;
> -	u8 reserved[3];
> +	u8 dir;
> +	u16 ct_zone_id;
> +	u8 ct_zone_flags;
> +	u8 ct_zone_dir;

Create a new struct instead of modifying the existing one such that the existing 
test can test the size 12 still works.

The new one can use the ___new suffix like "struct bpf_ct_opts___new".

>   } __attribute__((preserve_access_index));
>   
>   struct nf_conn *bpf_xdp_ct_alloc(struct xdp_md *, struct bpf_sock_tuple *, u32,
> @@ -84,16 +90,6 @@ nf_ct_test(struct nf_conn *(*lookup_fn)(void *, struct bpf_sock_tuple *, u32,
>   	else
>   		test_einval_bpf_tuple = opts_def.error;
>   
> -	opts_def.reserved[0] = 1;
> -	ct = lookup_fn(ctx, &bpf_tuple, sizeof(bpf_tuple.ipv4), &opts_def,
> -		       sizeof(opts_def));
> -	opts_def.reserved[0] = 0;
> -	opts_def.l4proto = IPPROTO_TCP;
> -	if (ct)
> -		bpf_ct_release(ct);
> -	else
> -		test_einval_reserved = opts_def.error;
> -
>   	opts_def.netns_id = -2;
>   	ct = lookup_fn(ctx, &bpf_tuple, sizeof(bpf_tuple.ipv4), &opts_def,
>   		       sizeof(opts_def));
> @@ -220,10 +216,77 @@ nf_ct_test(struct nf_conn *(*lookup_fn)(void *, struct bpf_sock_tuple *, u32,
>   	}
>   }
>   
> +static __always_inline void
> +nf_ct_zone_id_test(struct nf_conn *(*lookup_fn)(void *, struct bpf_sock_tuple *, u32,
> +						struct bpf_ct_opts___local *, u32),
> +		   struct nf_conn *(*alloc_fn)(void *, struct bpf_sock_tuple *, u32,
> +					       struct bpf_ct_opts___local *, u32),
> +		   void *ctx)
> +{
> +	struct bpf_ct_opts___local opts_def = { .l4proto = IPPROTO_TCP, .netns_id = -1 };
> +	struct bpf_sock_tuple bpf_tuple;
> +	struct nf_conn *ct;
> +
> +	__builtin_memset(&bpf_tuple, 0, sizeof(bpf_tuple.ipv4));
> +
> +	bpf_tuple.ipv4.saddr = bpf_get_prandom_u32(); /* src IP */
> +	bpf_tuple.ipv4.daddr = bpf_get_prandom_u32(); /* dst IP */
> +	bpf_tuple.ipv4.sport = bpf_get_prandom_u32(); /* src port */
> +	bpf_tuple.ipv4.dport = bpf_get_prandom_u32(); /* dst port */
> +
> +	/* use non-default ct zone */
> +	opts_def.ct_zone_id = 10;

Can the ct_zone_flags and ct_zone_dir be tested also?

pw-bot: cr

> +	ct = alloc_fn(ctx, &bpf_tuple, sizeof(bpf_tuple.ipv4), &opts_def,
> +		      sizeof(opts_def));
> +	if (ct) {
> +		__u16 sport = bpf_get_prandom_u32();
> +		__u16 dport = bpf_get_prandom_u32();
> +		union nf_inet_addr saddr = {};
> +		union nf_inet_addr daddr = {};
> +		struct nf_conn *ct_ins;
> +
> +		bpf_ct_set_timeout(ct, 10000);
> +
> +		/* snat */
> +		saddr.ip = bpf_get_prandom_u32();
> +		bpf_ct_set_nat_info(ct, &saddr, sport, NF_NAT_MANIP_SRC___local);
> +		/* dnat */
> +		daddr.ip = bpf_get_prandom_u32();
> +		bpf_ct_set_nat_info(ct, &daddr, dport, NF_NAT_MANIP_DST___local);
> +
> +		ct_ins = bpf_ct_insert_entry(ct);
> +		if (ct_ins) {
> +			struct nf_conn *ct_lk;
> +
> +			/* entry should exist in same ct zone we inserted it */
> +			ct_lk = lookup_fn(ctx, &bpf_tuple, sizeof(bpf_tuple.ipv4),
> +					  &opts_def, sizeof(opts_def));
> +			if (ct_lk) {
> +				bpf_ct_release(ct_lk);
> +				test_ct_zone_id_succ_lookup = 0;
> +			}
> +
> +			/* entry should not exist in default ct zone */
> +			opts_def.ct_zone_id = 0;
> +			ct_lk = lookup_fn(ctx, &bpf_tuple, sizeof(bpf_tuple.ipv4),
> +					  &opts_def, sizeof(opts_def));
> +			if (ct_lk)
> +				bpf_ct_release(ct_lk);
> +			else
> +				test_ct_zone_id_enoent_lookup = opts_def.error;
> +
> +			bpf_ct_release(ct_ins);
> +			test_ct_zone_id_insert_entry = 0;
> +		}
> +		test_ct_zone_id_alloc_entry = 0;
> +	}
> +}
> +
>   SEC("xdp")
>   int nf_xdp_ct_test(struct xdp_md *ctx)
>   {
>   	nf_ct_test((void *)bpf_xdp_ct_lookup, (void *)bpf_xdp_ct_alloc, ctx);
> +	nf_ct_zone_id_test((void *)bpf_xdp_ct_lookup, (void *)bpf_xdp_ct_alloc, ctx);
>   	return 0;
>   }
>   
> @@ -231,6 +294,7 @@ SEC("tc")
>   int nf_skb_ct_test(struct __sk_buff *ctx)
>   {
>   	nf_ct_test((void *)bpf_skb_ct_lookup, (void *)bpf_skb_ct_alloc, ctx);
> +	nf_ct_zone_id_test((void *)bpf_skb_ct_lookup, (void *)bpf_skb_ct_alloc, ctx);
>   	return 0;
>   }
>   


  reply	other threads:[~2024-04-25 23:34 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-24  3:00 [PATCH bpf-next v2 1/2] net: netfilter: Make ct zone opts configurable for bpf ct helpers Brad Cowie
2024-04-24  3:00 ` [PATCH bpf-next v2 2/2] selftests/bpf: Update tests for new ct zone opts for nf_conntrack kfuncs Brad Cowie
2024-04-25 23:34   ` Martin KaFai Lau [this message]
2024-05-01  5:03     ` Brad Cowie
2024-04-25 23:27 ` [PATCH bpf-next v2 1/2] net: netfilter: Make ct zone opts configurable for bpf ct helpers Martin KaFai Lau
2024-05-01  4:59   ` Brad Cowie
2024-05-01 22:11     ` Martin KaFai Lau

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=288b0d96-d5a8-4d81-9302-32b0d414a983@linux.dev \
    --to=martin.lau@linux.dev \
    --cc=andrii@kernel.org \
    --cc=ast@kernel.org \
    --cc=bpf@vger.kernel.org \
    --cc=brad@faucet.nz \
    --cc=coreteam@netfilter.org \
    --cc=daniel@iogearbox.net \
    --cc=davem@davemloft.net \
    --cc=john.fastabend@gmail.com \
    --cc=jolsa@kernel.org \
    --cc=kuba@kernel.org \
    --cc=lorenzo@kernel.org \
    --cc=memxor@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=netfilter-devel@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=pablo@netfilter.org \
    --cc=sdf@google.com \
    --cc=song@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).