From: Dan Williams <dan.j.williams@intel.com>
To: linux-nvdimm@lists.01.org
Cc: jack@suse.cz, "Darrick J. Wong" <darrick.wong@oracle.com>,
Dave Chinner <david@fromorbit.com>,
linux-kernel@vger.kernel.org, linux-xfs@vger.kernel.org,
linux-fsdevel@vger.kernel.org, Christoph Hellwig <hch@lst.de>
Subject: [PATCH v7 13/14] xfs: prepare xfs_break_layouts() for another layout type
Date: Wed, 21 Mar 2018 15:58:25 -0700 [thread overview]
Message-ID: <152167310580.5268.18270880990191450094.stgit@dwillia2-desk3.amr.corp.intel.com> (raw)
In-Reply-To: <152167302988.5268.4370226749268662682.stgit@dwillia2-desk3.amr.corp.intel.com>
When xfs is operating as the back-end of a pNFS block server, it
prevents collisions between local and remote operations by requiring a
lease to be held for remotely accessed blocks. Local filesystem
operations break those leases before writing or mutating the extent map
of the file.
A similar mechanism is needed to prevent operations on pinned dax
mappings, like device-DMA, from colliding with extent unmap operations.
BREAK_WRITE and BREAK_UNMAPI are introduced as two distinct levels of
layout breaking.
Layouts are broken in the BREAK_WRITE case to ensure that layout-holders
do not collide with local writes. Additionally, layouts are broken in
the BREAK_UNMAPI case to make sure the layout-holder has a consistent
view of the file's extent map. While BREAK_WRITE breaks can be satisfied
be recalling FL_LAYOUT leases, BREAK_UNMAPI breaks additionally require
waiting for busy dax-pages to go idle while holding XFS_MMAPLOCK_EXCL.
After this refactoring xfs_break_layouts() becomes the entry point for
coordinating both types of breaks. Finally, xfs_break_leased_layouts()
becomes just the BREAK_WRITE handler.
Note that the unlock tracking is needed in a follow on change. That will
coordinate retrying either break handler until both successfully test
for a lease break while maintaining the lock state.
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Dave Chinner <david@fromorbit.com>
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
fs/xfs/xfs_file.c | 32 ++++++++++++++++++++++++++++++--
fs/xfs/xfs_inode.h | 16 ++++++++++++++++
fs/xfs/xfs_ioctl.c | 3 +--
fs/xfs/xfs_iops.c | 6 +++---
fs/xfs/xfs_pnfs.c | 13 +++++++------
fs/xfs/xfs_pnfs.h | 6 ++++--
6 files changed, 61 insertions(+), 15 deletions(-)
diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c
index 18edf04811d0..7f37fadf007e 100644
--- a/fs/xfs/xfs_file.c
+++ b/fs/xfs/xfs_file.c
@@ -350,7 +350,7 @@ xfs_file_aio_write_checks(
if (error <= 0)
return error;
- error = xfs_break_layouts(inode, iolock);
+ error = xfs_break_layouts(inode, iolock, BREAK_WRITE);
if (error)
return error;
@@ -752,6 +752,34 @@ xfs_file_write_iter(
return ret;
}
+int
+xfs_break_layouts(
+ struct inode *inode,
+ uint *iolock,
+ enum layout_break_reason reason)
+{
+ struct xfs_inode *ip = XFS_I(inode);
+ bool did_unlock = false;
+ int error = 0;
+
+ ASSERT(xfs_isilocked(ip, XFS_IOLOCK_SHARED | XFS_IOLOCK_EXCL
+ | (reason == BREAK_UNMAPI
+ ? XFS_MMAPLOCK_EXCL : 0)));
+
+ switch (reason) {
+ case BREAK_UNMAPI:
+ /* fall through */
+ case BREAK_WRITE:
+ error = xfs_break_leased_layouts(inode, iolock, &did_unlock);
+ break;
+ default:
+ error = -EINVAL;
+ break;
+ }
+
+ return error;
+}
+
#define XFS_FALLOC_FL_SUPPORTED \
(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE | \
FALLOC_FL_COLLAPSE_RANGE | FALLOC_FL_ZERO_RANGE | \
@@ -778,7 +806,7 @@ xfs_file_fallocate(
return -EOPNOTSUPP;
xfs_ilock(ip, iolock);
- error = xfs_break_layouts(inode, &iolock);
+ error = xfs_break_layouts(inode, &iolock, BREAK_UNMAPI);
if (error)
goto out_unlock;
diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
index 3e8dc990d41c..6951d57aae71 100644
--- a/fs/xfs/xfs_inode.h
+++ b/fs/xfs/xfs_inode.h
@@ -379,6 +379,20 @@ static inline void xfs_ifunlock(struct xfs_inode *ip)
>> XFS_ILOCK_SHIFT)
/*
+ * Layouts are broken in the BREAK_WRITE case to ensure that
+ * layout-holders do not collide with local writes. Additionally,
+ * layouts are broken in the BREAK_UNMAPI case to make sure the
+ * layout-holder has a consistent view of the file's extent map. While
+ * BREAK_WRITE breaks can be satisfied be recalling FL_LAYOUT leases,
+ * BREAK_UNMAPI breaks additionally require waiting for busy dax-pages
+ * to go idle.
+ */
+enum layout_break_reason {
+ BREAK_WRITE,
+ BREAK_UNMAPI,
+};
+
+/*
* For multiple groups support: if S_ISGID bit is set in the parent
* directory, group of new file is set to that of the parent, and
* new subdirectory gets S_ISGID bit from parent.
@@ -447,6 +461,8 @@ int xfs_zero_eof(struct xfs_inode *ip, xfs_off_t offset,
xfs_fsize_t isize, bool *did_zeroing);
int xfs_zero_range(struct xfs_inode *ip, xfs_off_t pos, xfs_off_t count,
bool *did_zero);
+int xfs_break_layouts(struct inode *inode, uint *iolock,
+ enum layout_break_reason reason);
/* from xfs_iops.c */
extern void xfs_setup_inode(struct xfs_inode *ip);
diff --git a/fs/xfs/xfs_ioctl.c b/fs/xfs/xfs_ioctl.c
index 4151fade4bb1..967be496b052 100644
--- a/fs/xfs/xfs_ioctl.c
+++ b/fs/xfs/xfs_ioctl.c
@@ -39,7 +39,6 @@
#include "xfs_icache.h"
#include "xfs_symlink.h"
#include "xfs_trans.h"
-#include "xfs_pnfs.h"
#include "xfs_acl.h"
#include "xfs_btree.h"
#include <linux/fsmap.h>
@@ -644,7 +643,7 @@ xfs_ioc_space(
return error;
xfs_ilock(ip, iolock);
- error = xfs_break_layouts(inode, &iolock);
+ error = xfs_break_layouts(inode, &iolock, BREAK_UNMAPI);
if (error)
goto out_unlock;
diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c
index d23aa08426f9..7364474347d1 100644
--- a/fs/xfs/xfs_iops.c
+++ b/fs/xfs/xfs_iops.c
@@ -37,7 +37,6 @@
#include "xfs_da_btree.h"
#include "xfs_dir2.h"
#include "xfs_trans_space.h"
-#include "xfs_pnfs.h"
#include "xfs_iomap.h"
#include <linux/capability.h>
@@ -1027,13 +1026,14 @@ xfs_vn_setattr(
int error;
if (iattr->ia_valid & ATTR_SIZE) {
- struct xfs_inode *ip = XFS_I(d_inode(dentry));
+ struct inode *inode = d_inode(dentry);
+ struct xfs_inode *ip = XFS_I(inode);
uint iolock;
xfs_ilock(ip, XFS_MMAPLOCK_EXCL);
iolock = XFS_IOLOCK_EXCL | XFS_MMAPLOCK_EXCL;
- error = xfs_break_layouts(d_inode(dentry), &iolock);
+ error = xfs_break_layouts(inode, &iolock, BREAK_UNMAPI);
if (error) {
xfs_iunlock(ip, XFS_MMAPLOCK_EXCL);
return error;
diff --git a/fs/xfs/xfs_pnfs.c b/fs/xfs/xfs_pnfs.c
index 6ea7b0b55d02..40e69edb7e2e 100644
--- a/fs/xfs/xfs_pnfs.c
+++ b/fs/xfs/xfs_pnfs.c
@@ -31,17 +31,18 @@
* rules in the page fault path we don't bother.
*/
int
-xfs_break_layouts(
+xfs_break_leased_layouts(
struct inode *inode,
- uint *iolock)
+ uint *iolock,
+ bool *did_unlock)
{
struct xfs_inode *ip = XFS_I(inode);
int error;
- ASSERT(xfs_isilocked(ip, XFS_IOLOCK_SHARED|XFS_IOLOCK_EXCL));
-
+ *did_unlock = false;
while ((error = break_layout(inode, false) == -EWOULDBLOCK)) {
xfs_iunlock(ip, *iolock);
+ *did_unlock = true;
error = break_layout(inode, true);
*iolock &= ~XFS_IOLOCK_SHARED;
*iolock |= XFS_IOLOCK_EXCL;
@@ -121,8 +122,8 @@ xfs_fs_map_blocks(
* Lock out any other I/O before we flush and invalidate the pagecache,
* and then hand out a layout to the remote system. This is very
* similar to direct I/O, except that the synchronization is much more
- * complicated. See the comment near xfs_break_layouts for a detailed
- * explanation.
+ * complicated. See the comment near xfs_break_leased_layouts
+ * for a detailed explanation.
*/
xfs_ilock(ip, XFS_IOLOCK_EXCL);
diff --git a/fs/xfs/xfs_pnfs.h b/fs/xfs/xfs_pnfs.h
index bf45951e28fe..0f2f51037064 100644
--- a/fs/xfs/xfs_pnfs.h
+++ b/fs/xfs/xfs_pnfs.h
@@ -9,11 +9,13 @@ int xfs_fs_map_blocks(struct inode *inode, loff_t offset, u64 length,
int xfs_fs_commit_blocks(struct inode *inode, struct iomap *maps, int nr_maps,
struct iattr *iattr);
-int xfs_break_layouts(struct inode *inode, uint *iolock);
+int xfs_break_leased_layouts(struct inode *inode, uint *iolock,
+ bool *did_unlock);
#else
static inline int
-xfs_break_layouts(struct inode *inode, uint *iolock)
+xfs_break_leased_layouts(struct inode *inode, uint *iolock, bool *did_unlock)
{
+ *did_unlock = false;
return 0;
}
#endif /* CONFIG_EXPORTFS_BLOCK_OPS */
_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm
next prev parent reply other threads:[~2018-03-21 23:01 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-21 22:57 [PATCH v7 00/14] dax: fix dma vs truncate/hole-punch Dan Williams
2018-03-21 22:57 ` [PATCH v7 01/14] dax: store pfns in the radix Dan Williams
2018-03-21 22:57 ` [PATCH v7 02/14] fs, dax: prepare for dax-specific address_space_operations Dan Williams
2018-03-29 15:28 ` Jan Kara
2018-03-21 22:57 ` [PATCH v7 03/14] block, dax: remove dead code in blkdev_writepages() Dan Williams
2018-03-29 15:29 ` Jan Kara
2018-03-21 22:57 ` [PATCH v7 04/14] xfs, dax: introduce xfs_dax_aops Dan Williams
2018-03-29 15:30 ` Jan Kara
2018-03-21 22:57 ` [PATCH v7 05/14] ext4, dax: introduce ext4_dax_aops Dan Williams
2018-03-29 15:40 ` Jan Kara
2018-03-29 18:09 ` Christoph Hellwig
2018-03-29 22:47 ` Dan Williams
2018-03-21 22:57 ` [PATCH v7 06/14] ext2, dax: introduce ext2_dax_aops Dan Williams
2018-03-29 15:44 ` Jan Kara
2018-03-21 22:57 ` [PATCH v7 07/14] fs, dax: use page->mapping to warn if truncate collides with a busy page Dan Williams
2018-03-29 16:02 ` Jan Kara
2018-03-29 19:02 ` Dan Williams
2018-03-29 23:02 ` Dan Williams
2018-03-30 8:22 ` Jan Kara
2018-03-21 22:57 ` [PATCH v7 08/14] mm, dax: enable filesystems to trigger dev_pagemap ->page_free callbacks Dan Williams
2018-03-29 16:36 ` Jan Kara
2018-03-21 22:57 ` [PATCH v7 09/14] mm, dev_pagemap: introduce CONFIG_DEV_PAGEMAP_OPS Dan Williams
2018-03-22 7:49 ` Christoph Hellwig
2018-03-30 10:37 ` Jan Kara
2018-03-21 22:58 ` [PATCH v7 10/14] memremap: mark devm_memremap_pages() EXPORT_SYMBOL_GPL Dan Williams
2018-03-22 7:51 ` Christoph Hellwig
2018-03-21 22:58 ` [PATCH v7 11/14] mm, fs, dax: handle layout changes to pinned dax mappings Dan Williams
2018-03-21 22:58 ` [PATCH v7 12/14] xfs: prepare xfs_break_layouts() to be called with XFS_MMAPLOCK_EXCL Dan Williams
2018-03-22 7:25 ` Christoph Hellwig
2018-03-30 15:16 ` Darrick J. Wong
2018-03-21 22:58 ` Dan Williams [this message]
2018-03-22 7:27 ` [PATCH v7 13/14] xfs: prepare xfs_break_layouts() for another layout type Christoph Hellwig
2018-03-22 15:50 ` Dan Williams
2018-03-21 22:58 ` [PATCH v7 14/14] xfs, dax: introduce xfs_break_dax_layouts() Dan Williams
2018-03-22 7:43 ` Christoph Hellwig
2018-03-22 16:28 ` Dan Williams
2018-03-22 17:02 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=152167310580.5268.18270880990191450094.stgit@dwillia2-desk3.amr.corp.intel.com \
--to=dan.j.williams@intel.com \
--cc=darrick.wong@oracle.com \
--cc=david@fromorbit.com \
--cc=hch@lst.de \
--cc=jack@suse.cz \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nvdimm@lists.01.org \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).