From: Andrew Jeffery <andrew@aj.id.au>
To: linux-kernel@vger.kernel.org
Cc: Andrew Jeffery <andrew@aj.id.au>,
robh+dt@kernel.org, mark.rutland@arm.com, joel@jms.id.au,
gregkh@linuxfoundation.org, Eugene.Cho@dell.com,
a.amelkin@yadro.com, stewart@linux.ibm.com,
benh@kernel.crashing.org, openbmc@lists.ozlabs.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 4/4] dts: aspeed-g5: Add bmc-misc-ctrl nodes to devicetree
Date: Tue, 3 Jul 2018 17:04:13 +1000 [thread overview]
Message-ID: <20180703070413.28756-5-andrew@aj.id.au> (raw)
In-Reply-To: <20180703070413.28756-1-andrew@aj.id.au>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
arch/arm/boot/dts/aspeed-g5.dtsi | 192 +++++++++++++++++++++++++++++++
1 file changed, 192 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 17f2714d18a7..57d477e17c0c 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -187,6 +187,77 @@
aspeed,external-nodes = <&gfx &lhc>;
};
+
+ field@2c.16 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x2c>;
+ mask = <0x00030000>;
+ label = "dac-mux";
+ };
+
+ field@50.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x50>;
+ mask = <0xffffffff>;
+ label = "vga0";
+ read-only;
+ };
+
+ field@54.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x54>;
+ mask = <0xffffffff>;
+ label = "vga1";
+ read-only;
+ };
+
+ field@58.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x58>;
+ mask = <0xffffffff>;
+ label = "vga2";
+ read-only;
+ };
+
+ field@5c.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x5c>;
+ mask = <0xffffffff>;
+ label = "vga3";
+ read-only;
+ };
+
+ field@60.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x60>;
+ mask = <0xffffffff>;
+ label = "vga4";
+ read-only;
+ };
+
+ field@64.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x64>;
+ mask = <0xffffffff>;
+ label = "vga5";
+ read-only;
+ };
+
+ field@68.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x68>;
+ mask = <0xffffffff>;
+ label = "vga6";
+ read-only;
+ };
+
+ field@6c.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x6c>;
+ mask = <0xffffffff>;
+ label = "vga7";
+ read-only;
+ };
};
rng: hwrng@1e6e2078 {
@@ -343,6 +414,127 @@
#reset-cells = <1>;
};
+ field@f0.24 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf0 24 8>;
+ mask = <0xff000000>;
+ label = "sio-2b";
+ };
+
+ field@f0.16 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf0>;
+ mask = <0x00ff0000>;
+ label = "sio-2a";
+ };
+
+ field@f0.8 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf0>;
+ mask = <0x0000ff00>;
+ bit-shift = <8>;
+ label = "sio-29";
+ };
+
+ field@f0.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf0>;
+ mask = <0x000000ff>;
+ label = "sio-28";
+ };
+
+ field@f4.24 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf4>;
+ mask = <0xff000000>;
+ label = "sio-2f";
+ };
+
+ field@f4.16 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf4>;
+ mask = <0x00ff0000>;
+ label = "sio-2e";
+ };
+
+ field@f4.8 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf4>;
+ mask = <0x0000ff00>;
+ label = "sio-2d";
+ };
+
+ field@f4.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf4>;
+ mask = <0x000000ff>;
+ label = "sio-2c";
+ };
+
+ field@f8.24 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf8>;
+ mask = <0xff000000>;
+ read-only;
+ label = "sio-23";
+ };
+
+ field@f8.16 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf8>;
+ mask = <0x00ff0000>;
+ read-only;
+ label = "sio-22";
+ };
+
+ field@f8.8 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf8>;
+ mask = <0x0000ff00>;
+ read-only;
+ label = "sio-21";
+ };
+
+ field@f8.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf8>;
+ mask = <0x000000ff>;
+ read-only;
+ label = "sio-20";
+ };
+
+ field@fc.24 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xfc>;
+ mask = <0xff000000>;
+ read-only;
+ label = "sio-27";
+ };
+
+ field@fc.16 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xfc>;
+ mask = <0x00ff0000>;
+ read-only;
+ label = "sio-26";
+ };
+
+ field@fc.8 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xfc>;
+ mask = <0x0000ff00>;
+ read-only;
+ label = "sio-25";
+ };
+
+ field@fc.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xfc>;
+ mask = <0x000000ff>;
+ read-only;
+ label = "sio-24";
+ };
+
ibt: ibt@c0 {
compatible = "aspeed,ast2500-ibt-bmc";
reg = <0xc0 0x18>;
--
2.17.1
next prev parent reply other threads:[~2018-07-03 7:04 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-03 7:04 [RFC PATCH 0/4] sysfs interface to miscellaneous BMC controls and fields Andrew Jeffery
2018-07-03 7:04 ` [RFC PATCH 1/4] dts: misc: Add bindings documentation for bmc-misc-ctrl Andrew Jeffery
2018-07-03 7:50 ` Greg KH
2018-07-03 14:16 ` Benjamin Herrenschmidt
2018-07-03 14:31 ` Greg KH
2018-07-03 15:39 ` Benjamin Herrenschmidt
2018-07-04 6:28 ` Andrew Jeffery
2018-07-03 7:04 ` [RFC PATCH 2/4] Documentation: ABI: Add sysfs-class-bmc documentation to testing Andrew Jeffery
2018-07-03 7:50 ` Greg KH
2018-07-04 6:29 ` Andrew Jeffery
2018-07-03 7:04 ` [RFC PATCH 3/4] misc: Add bmc-misc-ctrl Andrew Jeffery
2018-07-03 7:54 ` Greg KH
2018-07-04 7:18 ` Andrew Jeffery
2018-07-03 7:04 ` Andrew Jeffery [this message]
2018-07-03 7:54 ` [RFC PATCH 4/4] dts: aspeed-g5: Add bmc-misc-ctrl nodes to devicetree Greg KH
2018-07-04 6:29 ` Andrew Jeffery
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180703070413.28756-5-andrew@aj.id.au \
--to=andrew@aj.id.au \
--cc=Eugene.Cho@dell.com \
--cc=a.amelkin@yadro.com \
--cc=benh@kernel.crashing.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=openbmc@lists.ozlabs.org \
--cc=robh+dt@kernel.org \
--cc=stewart@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).