openbmc.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Eddie James <eajames@linux.ibm.com>
To: linux-fsi@lists.ozlabs.org
Cc: linux-hwmon@vger.kernel.org, jdelvare@suse.com,
	openbmc@lists.ozlabs.org, eajames@linux.ibm.com,
	linux-kernel@vger.kernel.org, linux@roeck-us.net
Subject: [PATCH v2 3/3] fsi: occ: Add dynamic debug to dump command and response
Date: Wed, 21 Jul 2021 14:02:31 -0500	[thread overview]
Message-ID: <20210721190231.117185-4-eajames@linux.ibm.com> (raw)
In-Reply-To: <20210721190231.117185-1-eajames@linux.ibm.com>

Use the dynamic branching capability of the dynamic debug subsystem
to dump the command and response with the correct OCC device name.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
Changes since v1:
 - include dynamic_debug to make sure the dynamic branching stuff is
   included on all platforms/configs

 drivers/fsi/fsi-occ.c | 45 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/drivers/fsi/fsi-occ.c b/drivers/fsi/fsi-occ.c
index ecf738411fe2..2bc53ea8f54f 100644
--- a/drivers/fsi/fsi-occ.c
+++ b/drivers/fsi/fsi-occ.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 
 #include <linux/device.h>
+#include <linux/dynamic_debug.h>
 #include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/fs.h>
@@ -21,6 +22,15 @@
 #include <linux/uaccess.h>
 #include <asm/unaligned.h>
 
+#if !defined(CONFIG_DYNAMIC_DEBUG_CORE)
+#define DEFINE_DYNAMIC_DEBUG_METADATA(name, fmt)
+#if defined(DEBUG)
+#define DYNAMIC_DEBUG_BRANCH(descriptor) true
+#else /* DEBUG */
+#define DYNAMIC_DEBUG_BRANCH(descriptor) false
+#endif /* DEBUG */
+#endif /* CONFIG_DYNAMIC_DEBUG_CORE */
+
 #define OCC_SRAM_BYTES		4096
 #define OCC_CMD_DATA_BYTES	4090
 #define OCC_RESP_DATA_BYTES	4089
@@ -359,6 +369,20 @@ static int occ_putsram(struct occ *occ, const void *data, ssize_t len,
 	byte_buf[len - 2] = checksum >> 8;
 	byte_buf[len - 1] = checksum & 0xff;
 
+	{
+		DEFINE_DYNAMIC_DEBUG_METADATA(ddm_occ_cmd, "OCC command");
+
+		if (DYNAMIC_DEBUG_BRANCH(ddm_occ_cmd)) {
+			char prefix[64];
+
+			snprintf(prefix, sizeof(prefix), "%s %s: cmd ",
+				 dev_driver_string(occ->dev),
+				 dev_name(occ->dev));
+			print_hex_dump(KERN_DEBUG, prefix, DUMP_PREFIX_OFFSET,
+				       16, 4, byte_buf, len, false);
+		}
+	}
+
 	rc = sbefifo_submit(occ->sbefifo, buf, cmd_len, buf, &resp_len);
 	if (rc)
 		goto free;
@@ -556,6 +580,27 @@ int fsi_occ_submit(struct device *dev, const void *request, size_t req_len,
 	}
 
 	*resp_len = resp_data_length + 7;
+
+	{
+		DEFINE_DYNAMIC_DEBUG_METADATA(ddm_occ_rsp,
+					      "OCC response");
+		DEFINE_DYNAMIC_DEBUG_METADATA(ddm_occ_full_rsp,
+					      "OCC full response");
+
+		if (DYNAMIC_DEBUG_BRANCH(ddm_occ_full_rsp) ||
+		    DYNAMIC_DEBUG_BRANCH(ddm_occ_rsp)) {
+			char prefix[64];
+			size_t l = DYNAMIC_DEBUG_BRANCH(ddm_occ_full_rsp) ?
+				*resp_len : 16;
+
+			snprintf(prefix, sizeof(prefix), "%s %s: rsp ",
+				 dev_driver_string(occ->dev),
+				 dev_name(occ->dev));
+			print_hex_dump(KERN_DEBUG, prefix, DUMP_PREFIX_OFFSET,
+				       16, 4, resp, l, false);
+		}
+	}
+
 	rc = occ_verify_checksum(occ, resp, resp_data_length);
 
  done:
-- 
2.27.0


      parent reply	other threads:[~2021-07-21 19:04 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-21 19:02 [PATCH v2 0/3] OCC: fsi and hwmon: Set sequence number in submit interface Eddie James
2021-07-21 19:02 ` [PATCH v2 1/3] fsi: occ: Force sequence numbering per OCC Eddie James
2021-07-21 19:02 ` [PATCH v2 2/3] hwmon: (occ) Remove sequence numbering and checksum calculation Eddie James
2021-07-21 19:02 ` Eddie James [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210721190231.117185-4-eajames@linux.ibm.com \
    --to=eajames@linux.ibm.com \
    --cc=jdelvare@suse.com \
    --cc=linux-fsi@lists.ozlabs.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=openbmc@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).