openbmc.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Joel Stanley <joel@jms.id.au>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: BMC-SW <BMC-SW@aspeedtech.com>,
	linux-aspeed <linux-aspeed@lists.ozlabs.org>,
	Po-Yu Chuang <ratbert@faraday-tech.com>,
	netdev@vger.kernel.org,
	OpenBMC Maillist <openbmc@lists.ozlabs.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Jakub Kicinski <kuba@kernel.org>,
	Dylan Hung <dylan_hung@aspeedtech.com>,
	"David S . Miller" <davem@davemloft.net>
Subject: Re: [PATCH 1/4] ftgmac100: Fix race issue on TX descriptor[0]
Date: Tue, 20 Oct 2020 04:13:49 +0000	[thread overview]
Message-ID: <CACPK8XdECaKwdQgWFQ=sRBiCjDLXHtMKo=o-xQZPmMZyevOukQ@mail.gmail.com> (raw)
In-Reply-To: <be7a978c48c9f1c6c29583350dee6168385c3039.camel@kernel.crashing.org>

On Mon, 19 Oct 2020 at 23:20, Benjamin Herrenschmidt
<benh@kernel.crashing.org> wrote:
>
> On Mon, 2020-10-19 at 16:57 +0800, Dylan Hung wrote:
> > These rules must be followed when accessing the TX descriptor:
> >
> > 1. A TX descriptor is "cleanable" only when its value is non-zero
> > and the owner bit is set to "software"
>
> Can you elaborate ? What is the point of that change ? The owner bit
> should be sufficient, why do we need to check other fields ?

I would like Dylan to clarify too. The datasheet has a footnote below
the descriptor layout:

 - TXDES#0: Bits 27 ~ 14 are valid only when FTS = 1
 - TXDES#1: Bits 31 ~ 0 are valid only when FTS = 1

So the ownership bit (31) is not valid unless FTS is set. However,
this isn't what his patch does. It adds checks for EDOTR.

>
> > 2. A TX descriptor is "writable" only when its value is zero
> > regardless the edotr mask.
>
> Again, why is that ? Can you elaborate ? What race are you trying to
> address here ?
>
> Cheers,
> Ben.
>
> > Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
> > Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
> > Signed-off-by: Joel Stanley <joel@jms.id.au>
> > ---
> >  drivers/net/ethernet/faraday/ftgmac100.c | 10 ++++++++++
> >  1 file changed, 10 insertions(+)
> >
> > diff --git a/drivers/net/ethernet/faraday/ftgmac100.c
> > b/drivers/net/ethernet/faraday/ftgmac100.c
> > index 00024dd41147..7cacbe4aecb7 100644
> > --- a/drivers/net/ethernet/faraday/ftgmac100.c
> > +++ b/drivers/net/ethernet/faraday/ftgmac100.c
> > @@ -647,6 +647,9 @@ static bool ftgmac100_tx_complete_packet(struct
> > ftgmac100 *priv)
> >       if (ctl_stat & FTGMAC100_TXDES0_TXDMA_OWN)
> >               return false;
> >
> > +     if ((ctl_stat & ~(priv->txdes0_edotr_mask)) == 0)
> > +             return false;
> > +
> >       skb = priv->tx_skbs[pointer];
> >       netdev->stats.tx_packets++;
> >       netdev->stats.tx_bytes += skb->len;
> > @@ -756,6 +759,9 @@ static netdev_tx_t
> > ftgmac100_hard_start_xmit(struct sk_buff *skb,
> >       pointer = priv->tx_pointer;
> >       txdes = first = &priv->txdes[pointer];
> >
> > +     if (le32_to_cpu(txdes->txdes0) & ~priv->txdes0_edotr_mask)
> > +             goto drop;
> > +
> >       /* Setup it up with the packet head. Don't write the head to
> > the
> >        * ring just yet
> >        */
> > @@ -787,6 +793,10 @@ static netdev_tx_t
> > ftgmac100_hard_start_xmit(struct sk_buff *skb,
> >               /* Setup descriptor */
> >               priv->tx_skbs[pointer] = skb;
> >               txdes = &priv->txdes[pointer];
> > +
> > +             if (le32_to_cpu(txdes->txdes0) & ~priv-
> > >txdes0_edotr_mask)
> > +                     goto dma_err;
> > +
> >               ctl_stat = ftgmac100_base_tx_ctlstat(priv, pointer);
> >               ctl_stat |= FTGMAC100_TXDES0_TXDMA_OWN;
> >               ctl_stat |= FTGMAC100_TXDES0_TXBUF_SIZE(len);
>

  reply	other threads:[~2020-10-20  4:16 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-19  8:57 [PATCH 0/4] fix ftgmac100 issues on aspeed soc Dylan Hung
2020-10-19  8:57 ` [PATCH 1/4] ftgmac100: Fix race issue on TX descriptor[0] Dylan Hung
2020-10-19 23:19   ` Benjamin Herrenschmidt
2020-10-20  4:13     ` Joel Stanley [this message]
2020-10-20  6:23       ` Benjamin Herrenschmidt
2020-10-20  7:13         ` Joel Stanley
2020-10-19  8:57 ` [PATCH 2/4] ftgmac100: Fix missing-poll issue Dylan Hung
2020-10-19  8:57 ` [PATCH 3/4] ftgmac100: Add a dummy read to ensure running sequence Dylan Hung
2020-10-19 23:25   ` Benjamin Herrenschmidt
2020-10-19  8:57 ` [PATCH 4/4] ftgmac100: Restart MAC HW once Dylan Hung
2020-10-19 23:26   ` Benjamin Herrenschmidt
2020-10-20  4:14   ` Joel Stanley
2021-03-12  0:26     ` Joel Stanley
2021-03-12  0:28       ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CACPK8XdECaKwdQgWFQ=sRBiCjDLXHtMKo=o-xQZPmMZyevOukQ@mail.gmail.com' \
    --to=joel@jms.id.au \
    --cc=BMC-SW@aspeedtech.com \
    --cc=benh@kernel.crashing.org \
    --cc=davem@davemloft.net \
    --cc=dylan_hung@aspeedtech.com \
    --cc=kuba@kernel.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=openbmc@lists.ozlabs.org \
    --cc=ratbert@faraday-tech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).