Hi Patrick,

Thanks for the clarification.Got things cleared now.

As you mentioned, I will implement chassis_system0 object for full power cycle of the
entire system, and 'chassis_systemN' [N = 1:4 for my case] to do the slot-level full power cycle in x86-power-control.

Thanks,
Priyatharshan P

________________________________
From: Patrick Williams
Sent: Saturday, October 10, 2020 01:18
To: P. Priyatharshan
Cc: Vijay Khemka; openbmc@lists.ozlabs.org; ed@tanous.net; Velumani T-ERS,HCLTech
Subject: Re: 12v slot AC Support in x86-power-control

On Fri, Oct 09, 2020 at 03:49:55PM +0000, P. Priyatharshan wrote:

> The earlier "power on/off/cycle the computer card" sequence will only handle the computer card portion of the host.
> But the new feature [Slot on/off/cycle] will power cycles the entire card [ BIC + computer card portion + rest of the hardware in twin lake] for each slot.

Got it now.

Take a look at [1].  You should implement the 'chassisN' objects (in
x86-power-control?) to handle the normal power sequence to each of your
compute cards.  I think in your case N = 1:4.  You should also implement
the 'chassis_system0' object, which will be a full power cycle of the
entire system.  Finally, you'll want to implement 'chassis_systemN'
(again N = 1:4) to do the slot-level full power cycle.

1. https://github.com/openbmc/phosphor-dbus-interfaces/tree/master/xyz/openbmc_project/State#chassis-system

--
Patrick Williams
::DISCLAIMER::
________________________________
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects.
________________________________