phone-devel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexey Minnekhanov <alexeymin@postmarketos.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Mathieu Poirier <mathieu.poirier@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: ~postmarketos/upstreaming@lists.sr.ht,
	phone-devel@vger.kernel.org,
	Alexey Minnekhanov <alexeymin@postmarketos.org>,
	Konrad Dybcio <konradybcio@gmail.com>
Subject: [PATCH v2 2/3] remoteproc: qcom: q6v5-mss: Add support for SDM630/636/660
Date: Wed, 21 Jun 2023 20:50:45 +0300	[thread overview]
Message-ID: <20230621175046.61521-2-alexeymin@postmarketos.org> (raw)
In-Reply-To: <20230621175046.61521-1-alexeymin@postmarketos.org>

Snapdragon 630/660 modem subsystem is similar to one in MSM8998
and can almost reuse it's reset sequence.

Downstream sources call this q6v5 version "qdsp6v62-1-5" and its
code path has additional checks for QDSP6v55_BHS_EN_REST_ACK
status [2].

Inspiration is taken from Konrad Dybcio's work in [1], but reworked
to use common code path with MSM8996/8998, instead of completely
separate "if" block for SDM660.

[1] https://github.com/SoMainline/linux/commit/7dd6dd9b936dc8d6c1f1abe299e5b065c33741e8
[2] https://github.com/MiCode/Xiaomi_Kernel_OpenSource/blob/lavender-q-oss/drivers/soc/qcom/pil-q6v5.c#L393

Co-developed-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>

---

V2: use readl_relaxed_poll_timeout instead of hand-coded for loop.

In his commit Konrad mentions that modem was unstable, but I don't
observe such behaviour on my device. Modem does not restart by itself,
and I could successfully enable ath10k wcn3990 Wi-Fi with this.

Also worth saying that in my initial tests just using qcom,msm8998-mss-pil
as-is, without separate resource struct and separate code paths for
SDM660, was also working fine.
---
 drivers/remoteproc/qcom_q6v5_mss.c | 51 ++++++++++++++++++++++++++++--
 1 file changed, 49 insertions(+), 2 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 8e15e4f85de1..dcbecae675e2 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -71,6 +71,7 @@
 #define QDSP6SS_MEM_PWR_CTL		0x0B0
 #define QDSP6V6SS_MEM_PWR_CTL		0x034
 #define QDSP6SS_STRAP_ACC		0x110
+#define QDSP6V62SS_BHS_STATUS		0x0C4
 
 /* AXI Halt Register Offsets */
 #define AXI_HALTREQ_REG			0x0
@@ -123,6 +124,7 @@
 #define QDSP6v56_CLAMP_QMC_MEM		BIT(22)
 #define QDSP6SS_XO_CBCR		0x0038
 #define QDSP6SS_ACC_OVERRIDE_VAL		0x20
+#define QDSP6v55_BHS_EN_REST_ACK	BIT(0)
 
 /* QDSP6v65 parameters */
 #define QDSP6SS_CORE_CBCR		0x20
@@ -130,6 +132,7 @@
 #define QDSP6SS_BOOT_CORE_START         0x400
 #define QDSP6SS_BOOT_CMD                0x404
 #define BOOT_FSM_TIMEOUT                10000
+#define BHS_CHECK_MAX_LOOPS             200
 
 struct reg_info {
 	struct regulator *reg;
@@ -250,6 +253,7 @@ enum {
 	MSS_MSM8998,
 	MSS_SC7180,
 	MSS_SC7280,
+	MSS_SDM660,
 	MSS_SDM845,
 };
 
@@ -700,7 +704,8 @@ static int q6v5proc_reset(struct q6v5 *qproc)
 	} else if (qproc->version == MSS_MSM8909 ||
 		   qproc->version == MSS_MSM8953 ||
 		   qproc->version == MSS_MSM8996 ||
-		   qproc->version == MSS_MSM8998) {
+		   qproc->version == MSS_MSM8998 ||
+		   qproc->version == MSS_SDM660) {
 
 		if (qproc->version != MSS_MSM8909 &&
 		    qproc->version != MSS_MSM8953)
@@ -734,6 +739,16 @@ static int q6v5proc_reset(struct q6v5 *qproc)
 		val |= readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
 		udelay(1);
 
+		if (qproc->version == MSS_SDM660) {
+			ret = readl_relaxed_poll_timeout(qproc->reg_base + QDSP6V62SS_BHS_STATUS,
+							 i, (i & QDSP6v55_BHS_EN_REST_ACK),
+							 1, BHS_CHECK_MAX_LOOPS);
+			if (ret == -ETIMEDOUT) {
+				dev_err(qproc->dev, "BHS_EN_REST_ACK not set!\n");
+				return -ETIMEDOUT;
+			}
+		}
+
 		/* Put LDO in bypass mode */
 		val |= QDSP6v56_LDO_BYP;
 		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
@@ -756,7 +771,7 @@ static int q6v5proc_reset(struct q6v5 *qproc)
 				mem_pwr_ctl = QDSP6SS_MEM_PWR_CTL;
 				i = 19;
 			} else {
-				/* MSS_MSM8998 */
+				/* MSS_MSM8998, MSS_SDM660 */
 				mem_pwr_ctl = QDSP6V6SS_MEM_PWR_CTL;
 				i = 28;
 			}
@@ -2193,6 +2208,37 @@ static const struct rproc_hexagon_res sc7280_mss = {
 	.version = MSS_SC7280,
 };
 
+static const struct rproc_hexagon_res sdm660_mss = {
+	.hexagon_mba_image = "mba.mbn",
+	.proxy_clk_names = (char*[]){
+			"xo",
+			"qdss",
+			"mem",
+			NULL
+	},
+	.active_clk_names = (char*[]){
+			"iface",
+			"bus",
+			"gpll0_mss",
+			"mnoc_axi",
+			"snoc_axi",
+			NULL
+	},
+	.proxy_pd_names = (char*[]){
+			"cx",
+			"mx",
+			NULL
+	},
+	.need_mem_protection = true,
+	.has_alt_reset = false,
+	.has_mba_logs = false,
+	.has_spare_reg = false,
+	.has_qaccept_regs = false,
+	.has_ext_cntl_regs = false,
+	.has_vq6 = false,
+	.version = MSS_SDM660,
+};
+
 static const struct rproc_hexagon_res sdm845_mss = {
 	.hexagon_mba_image = "mba.mbn",
 	.proxy_clk_names = (char*[]){
@@ -2475,6 +2521,7 @@ static const struct of_device_id q6v5_of_match[] = {
 	{ .compatible = "qcom,msm8998-mss-pil", .data = &msm8998_mss},
 	{ .compatible = "qcom,sc7180-mss-pil", .data = &sc7180_mss},
 	{ .compatible = "qcom,sc7280-mss-pil", .data = &sc7280_mss},
+	{ .compatible = "qcom,sdm660-mss-pil", .data = &sdm660_mss},
 	{ .compatible = "qcom,sdm845-mss-pil", .data = &sdm845_mss},
 	{ },
 };
-- 
2.39.3


  reply	other threads:[~2023-06-21 18:02 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-21 17:50 [PATCH v2 1/3] dt-bindings: remoteproc: qcom,msm8996-mss-pil: Add SDM660 compatible Alexey Minnekhanov
2023-06-21 17:50 ` Alexey Minnekhanov [this message]
2023-06-22 13:41   ` [PATCH v2 2/3] remoteproc: qcom: q6v5-mss: Add support for SDM630/636/660 Konrad Dybcio
2023-06-21 17:50 ` [PATCH v2 3/3] arm64: dts: qcom: sdm630: Add support for modem remoteproc Alexey Minnekhanov
2023-06-22  6:22   ` Krzysztof Kozlowski
2023-06-22 11:04     ` Alexey Minnekhanov
2023-07-15 22:13 ` (subset) [PATCH v2 1/3] dt-bindings: remoteproc: qcom,msm8996-mss-pil: Add SDM660 compatible Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230621175046.61521-2-alexeymin@postmarketos.org \
    --to=alexeymin@postmarketos.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=konradybcio@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mathieu.poirier@linaro.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).