From: "André Apitzsch" <git@apitzsch.eu>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, phone-devel@vger.kernel.org,
~postmarketos/upstreaming@lists.sr.ht,
"André Apitzsch" <git@apitzsch.eu>
Subject: [PATCH 2/2] arm64: dts: qcom: msm8939-longcheer-l9100: Enable RGB LED
Date: Fri, 13 Oct 2023 22:51:37 +0200 [thread overview]
Message-ID: <20231013-bq_leds-v1-2-cc374369fc56@apitzsch.eu> (raw)
In-Reply-To: <20231013-bq_leds-v1-0-cc374369fc56@apitzsch.eu>
l9100 uses KTD2026 LED driver. Add it to the device tree.
Signed-off-by: André Apitzsch <git@apitzsch.eu>
---
.../boot/dts/qcom/msm8939-longcheer-l9100.dts | 51 ++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
index 6802714fda3f..4eb33e36a8eb 100644
--- a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
+++ b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
@@ -8,6 +8,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
/ {
@@ -120,6 +121,46 @@ usb_id: usb-id {
};
+&blsp_i2c2 {
+ status = "okay";
+
+ led-controller@30 {
+ compatible = "kinetic,ktd2026";
+ reg = <0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin-supply = <&pm8916_l17>;
+ vio-supply = <&pm8916_l6>;
+
+ pinctrl-0 = <&status_led_default>;
+ pinctrl-names = "default";
+
+ multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+ };
+};
+
&blsp_i2c3 {
status = "okay";
@@ -184,6 +225,16 @@ &blsp_uart2 {
status = "okay";
};
+&pm8916_gpios {
+ status_led_default: status-led-default-state {
+ pins = "gpio3";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ power-source = <PM8916_GPIO_VPH>;
+ bias-disable;
+ output-high;
+ };
+};
+
&pm8916_mpps {
pwm_out: mpp4-state {
pins = "mpp4";
--
2.42.0
next prev parent reply other threads:[~2023-10-13 20:52 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-13 20:51 [PATCH 0/2] arm64: dts: qcom: longcheer l8910 and l9100: Enable RGB LED André Apitzsch
2023-10-13 20:51 ` [PATCH 1/2] arm64: dts: qcom: msm8916-longcheer-l8910: " André Apitzsch
2023-10-18 8:50 ` Konrad Dybcio
2023-10-13 20:51 ` André Apitzsch [this message]
2023-10-18 8:50 ` [PATCH 2/2] arm64: dts: qcom: msm8939-longcheer-l9100: " Konrad Dybcio
2023-10-22 15:50 ` [PATCH 0/2] arm64: dts: qcom: longcheer l8910 and l9100: " Bjorn Andersson
2023-10-28 10:39 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231013-bq_leds-v1-2-cc374369fc56@apitzsch.eu \
--to=git@apitzsch.eu \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).