phone-devel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Amit Pundir <amit.pundir@linaro.org>
To: Joel Selvaraj <jo@jsfamily.in>
Cc: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Srini Kandagatla <srinivas.kandagatla@linaro.org>,
	linux-arm-msm <linux-arm-msm@vger.kernel.org>,
	dt <devicetree@vger.kernel.org>,
	lkml <linux-kernel@vger.kernel.org>,
	phone-devel@vger.kernel.org,
	~postmarketos/upstreaming@lists.sr.ht
Subject: Re: [PATCH] arm64: dts: qcom: sdm845-xiaomi-beryllium: Add audio support
Date: Sun, 14 Mar 2021 23:41:26 +0530	[thread overview]
Message-ID: <CAMi1Hd3pP8BL7T5XHkh5e3a8c9X5aTdY4hES5-Zc9x5Uu7fNqA@mail.gmail.com> (raw)
In-Reply-To: <BN6PR2001MB1796C76ECAD9DE4807A72F43D96D9@BN6PR2001MB1796.namprd20.prod.outlook.com>

On Sun, 14 Mar 2021 at 22:32, Joel Selvaraj <jo@jsfamily.in> wrote:
>
> This patch adds audio support for Xiaomi Poco F1 phone. Phone's primary
> Mic and 3.5mm Headphone jack are handled through the SDM845 sound card
> and WCD9340 codec.
>

Tested-by: Amit Pundir <amit.pundir@linaro.org>

> Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
> ---
>  .../boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 117 ++++++++++++++++++
>  1 file changed, 117 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
> index 86cbae63eaf7..5b5786595cdb 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
> @@ -5,6 +5,8 @@
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
>  #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include <dt-bindings/sound/qcom,q6afe.h>
> +#include <dt-bindings/sound/qcom,q6asm.h>
>  #include "sdm845.dtsi"
>  #include "pm8998.dtsi"
>  #include "pmi8998.dtsi"
> @@ -240,6 +242,28 @@ resin {
>         };
>  };
>
> +/* QUAT I2S Uses 1 I2S SD Line for audio on TAS2559/60 amplifiers */
> +&q6afedai {
> +       qi2s@22 {
> +               reg = <22>;
> +               qcom,sd-lines = <0>;
> +       };
> +};
> +
> +&q6asmdai {
> +       dai@0 {
> +               reg = <0>;
> +       };
> +
> +       dai@1 {
> +               reg = <1>;
> +       };
> +
> +       dai@2 {
> +               reg = <2>;
> +       };
> +};
> +
>  &qupv3_id_0 {
>         status = "okay";
>  };
> @@ -257,6 +281,73 @@ &sdhc_2 {
>         cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
>  };
>
> +&sound {
> +       compatible = "qcom,db845c-sndcard";
> +       pinctrl-0 = <&quat_mi2s_active
> +                       &quat_mi2s_sd0_active>;
> +       pinctrl-names = "default";
> +       model = "Xiaomi Poco F1";
> +       audio-routing =
> +               "RX_BIAS", "MCLK",
> +               "AMIC1", "MIC BIAS1",
> +               "AMIC2", "MIC BIAS2",
> +               "AMIC3", "MIC BIAS3",
> +               "MM_DL1",  "MultiMedia1 Playback",
> +               "MM_DL2",  "MultiMedia2 Playback",
> +               "MultiMedia3 Capture", "MM_UL3";
> +
> +       mm1-dai-link {
> +               link-name = "MultiMedia1";
> +               cpu {
> +                       sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
> +               };
> +       };
> +
> +       mm2-dai-link {
> +               link-name = "MultiMedia2";
> +               cpu {
> +                       sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
> +               };
> +       };
> +
> +       mm3-dai-link {
> +               link-name = "MultiMedia3";
> +               cpu {
> +                       sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
> +               };
> +       };
> +
> +       slim-dai-link {
> +               link-name = "SLIM Playback";
> +               cpu {
> +                       sound-dai = <&q6afedai SLIMBUS_0_RX>;
> +               };
> +
> +               platform {
> +                       sound-dai = <&q6routing>;
> +               };
> +
> +               codec {
> +                       sound-dai =  <&wcd9340 0>;
> +               };
> +       };
> +
> +       slimcap-dai-link {
> +               link-name = "SLIM Capture";
> +               cpu {
> +                       sound-dai = <&q6afedai SLIMBUS_0_TX>;
> +               };
> +
> +               platform {
> +                       sound-dai = <&q6routing>;
> +               };
> +
> +               codec {
> +                       sound-dai = <&wcd9340 1>;
> +               };
> +       };
> +};
> +
>  &tlmm {
>         gpio-reserved-ranges = <0 4>, <81 4>;
>
> @@ -285,6 +376,15 @@ sdc2_card_det_n: sd-card-det-n {
>                 function = "gpio";
>                 bias-pull-up;
>         };
> +
> +       wcd_intr_default: wcd_intr_default {
> +               pins = <54>;
> +               function = "gpio";
> +
> +               input-enable;
> +               bias-pull-down;
> +               drive-strength = <2>;
> +       };
>  };
>
>  &uart6 {
> @@ -345,6 +445,23 @@ &usb_1_qmpphy {
>         vdda-pll-supply = <&vreg_l1a_0p875>;
>  };
>
> +&wcd9340{
> +       pinctrl-0 = <&wcd_intr_default>;
> +       pinctrl-names = "default";
> +       clock-names = "extclk";
> +       clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
> +       reset-gpios = <&tlmm 64 0>;
> +       vdd-buck-supply = <&vreg_s4a_1p8>;
> +       vdd-buck-sido-supply = <&vreg_s4a_1p8>;
> +       vdd-tx-supply = <&vreg_s4a_1p8>;
> +       vdd-rx-supply = <&vreg_s4a_1p8>;
> +       vdd-io-supply = <&vreg_s4a_1p8>;
> +       qcom,micbias1-microvolt = <2700000>;
> +       qcom,micbias2-microvolt = <1800000>;
> +       qcom,micbias3-microvolt = <2700000>;
> +       qcom,micbias4-microvolt = <2700000>;
> +};
> +
>  &wifi {
>         status = "okay";
>
> --
> 2.25.1
>

      reply	other threads:[~2021-03-14 18:12 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-14 17:01 [PATCH] arm64: dts: qcom: sdm845-xiaomi-beryllium: Add audio support Joel Selvaraj
2021-03-14 18:11 ` Amit Pundir [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAMi1Hd3pP8BL7T5XHkh5e3a8c9X5aTdY4hES5-Zc9x5Uu7fNqA@mail.gmail.com \
    --to=amit.pundir@linaro.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jo@jsfamily.in \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).