phone-devel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Luca Weiss" <luca.weiss@fairphone.com>
To: "Kalle Valo" <kvalo@kernel.org>
Cc: "Jeff Johnson" <quic_jjohnson@quicinc.com>,
	<~postmarketos/upstreaming@lists.sr.ht>,
	<phone-devel@vger.kernel.org>, <ath11k@lists.infradead.org>,
	<linux-wireless@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-msm@vger.kernel.org>
Subject: Re: [PATCH] wifi: ath11k: Defer on rproc_get failure
Date: Fri, 27 Oct 2023 12:07:09 +0200	[thread overview]
Message-ID: <CWJ4ZLEZCKQC.2STOBNUU06B2P@fairphone.com> (raw)
In-Reply-To: <87lebowjyf.fsf@kernel.org>

On Fri Oct 27, 2023 at 10:25 AM CEST, Kalle Valo wrote:
> Luca Weiss <luca.weiss@fairphone.com> writes:
>
> > If we already have gotten the rproc_handle (meaning the "qcom,rproc"
> > property is defined in the devicetree), it's a valid state that the
> > remoteproc module hasn't probed yet so we should defer probing instead
> > of just failing to probe.
> >
> > This resolves a race condition when the ath11k driver probes and fails
> > before the wpss remoteproc driver has probed, like the following:
> >
> >   [    6.232360] ath11k 17a10040.wifi: failed to get rproc
> >   [    6.232366] ath11k 17a10040.wifi: failed to get rproc: -22
> >   [    6.232478] ath11k: probe of 17a10040.wifi failed with error -22
> >        ...
> >   [    6.252415] remoteproc remoteproc2: 8a00000.remoteproc is available
> >   [    6.252776] remoteproc remoteproc2: powering up 8a00000.remoteproc
> >   [    6.252781] remoteproc remoteproc2: Booting fw image qcom/qcm6490/fairphone5/wpss.mdt, size 7188
> >
> > So, defer the probe if we hit that so we can retry later once the wpss
> > remoteproc is available.
> >
> > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
>
> Did you test this on a real device? If yes, what ath11k hardware and firmware
> did you use? We use Tested-on tag to document that:
>
> https://wireless.wiki.kernel.org/en/users/drivers/ath11k/submittingpatches#tested-on_tag

Hi,

Yes I tested this on qcm6490-fairphone-fp5 including some extra patches
for wpss-pas remoteproc support (nothing special, just adding it to the
existing PAS driver) and wifi enablement in dts.

I built this line from info from the dmesg, hope it's okay:

Tested-on: wcn6750 hw1.0 AHB WLAN.MSL.1.0.1-01264-QCAMSLSWPLZ-1.37886.3


And thinking about it, a Fixes tag would also be appropriate for this
patch.
The code was moved to a different file in commit ba929d6fe31a ("ath11k:
Remove rproc references from common core layer") but I think this tag
should be correct.

Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")

>
> I can add that in the pending branch if you provide the info.

Thanks!

Regards
Luca

  reply	other threads:[~2023-10-27 10:07 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-27  6:57 [PATCH] wifi: ath11k: Defer on rproc_get failure Luca Weiss
2023-10-27  8:25 ` Kalle Valo
2023-10-27 10:07   ` Luca Weiss [this message]
2023-11-13 15:37     ` Kalle Valo
2023-11-13 15:44       ` Luca Weiss
2023-11-13 15:39 ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CWJ4ZLEZCKQC.2STOBNUU06B2P@fairphone.com \
    --to=luca.weiss@fairphone.com \
    --cc=ath11k@lists.infradead.org \
    --cc=kvalo@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=quic_jjohnson@quicinc.com \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).