From: Stephan Gerhold <stephan@gerhold.net>
To: Vincent Knecht <vincent.knecht@mailoo.org>
Cc: phone-devel@vger.kernel.org,
~postmarketos/upstreaming@lists.sr.ht,
Rob Herring <robh+dt@kernel.org>, Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Sam Ravnborg <sam@ravnborg.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Arnd Bergmann <arnd@arndb.de>, Shawn Guo <shawnguo@kernel.org>,
Daniel Palmer <daniel@0x0f.com>,
Oleksij Rempel <linux@rempel-privat.de>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
allen <allen.chen@ite.com.tw>,
Max Merchel <Max.Merchel@tq-group.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH v2 2/4] arm64: dts: qcom: Add device tree for Alcatel Idol 3 (4.7")
Date: Sat, 30 Jan 2021 12:25:18 +0100 [thread overview]
Message-ID: <YBVCHvGy5VwTThZ4@gerhold.net> (raw)
In-Reply-To: <20210130105717.2628781-3-vincent.knecht@mailoo.org>
On Sat, Jan 30, 2021 at 11:57:11AM +0100, Vincent Knecht wrote:
> The Alcatel Idol 3 (4.7") is a smartphone based on MSM8916.
> Add a device tree with support for USB, eMMC, SD-Card, WiFi,
> BT, power/volume buttons, vibrator and the following sensors:
> magnetometer, accelerometer, gyroscope, ambient light+proximity
>
> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../boot/dts/qcom/msm8916-alcatel-idol347.dts | 291 ++++++++++++++++++
> 2 files changed, 292 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 59455db7b493..0feeedb712cc 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
> dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
> new file mode 100644
> index 000000000000..540b1fa4b260
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
> @@ -0,0 +1,291 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +/dts-v1/;
> +
> +#include "msm8916-pm8916.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> + model = "Alcatel OneTouch Idol 3 (4.7)";
> + compatible = "alcatel,idol347", "qcom,msm8916";
> +
> + aliases {
> + serial0 = &blsp1_uart2;
> + };
> +
> + chosen {
> + stdout-path = "serial0";
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&gpio_keys_default>;
> +
> + label = "GPIO Buttons";
> +
> + volume-up {
> + label = "Volume Up";
> + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEUP>;
> + };
> + };
> +
> + usb_id: usb-id {
> + compatible = "linux,extcon-usb-gpio";
> + id-gpio = <&msmgpio 69 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb_id_default>;
> + };
> +};
> +
> +&blsp1_uart2 {
> + status = "okay";
> +};
> +
> +&blsp_i2c5 {
> + status = "okay";
> +
> + magnetometer@c {
> + compatible = "asahi-kasei,ak09911";
> + reg = <0x0c>;
> + vdd-supply = <&pm8916_l17>;
> + vid-supply = <&pm8916_l6>;
> + reset-gpios = <&msmgpio 8 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&mag_reset_default>;
> + mount-matrix = "0", "1", "0",
> + "-1", "0", "0",
> + "0", "0", "1";
> + };
> +
> + accelerometer@f {
> + compatible = "kionix,kxtj21009";
> + reg = <0x0f>;
> + vdd-supply = <&pm8916_l17>;
> + vddio-supply = <&pm8916_l6>;
> + interrupt-parent = <&msmgpio>;
> + interrupts = <31 IRQ_TYPE_EDGE_RISING>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&accel_int_default>;
> + mount-matrix = "-1", "0", "0",
> + "0", "1", "0",
> + "0", "0", "-1";
> + };
> +
> + proximity@48 {
> + compatible = "sensortek,stk3310";
> + reg = <0x48>;
> + interrupt-parent = <&msmgpio>;
> + interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&proximity_int_default>;
> + };
> +
> + gyroscope@68 {
> + compatible = "bosch,bmg160";
> + reg = <0x68>;
> + vdd-supply = <&pm8916_l17>;
> + vddio-supply = <&pm8916_l6>;
> + interrupt-parent = <&msmgpio>;
> + interrupts = <97 IRQ_TYPE_EDGE_RISING>,
> + <98 IRQ_TYPE_EDGE_RISING>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&gyro_int_default>;
> + };
> +};
> +
> +&pm8916_resin {
> + status = "okay";
> + linux,code = <KEY_VOLUMEDOWN>;
> +};
> +
> +&pm8916_vib {
> + status = "okay";
> +};
> +
> +&pronto {
> + status = "okay";
> +};
> +
> +&sdhc_1 {
> + status = "okay";
> +
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
> + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> +};
> +
> +&sdhc_2 {
> + status = "okay";
> +
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
> + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
> +
> + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
> +};
> +
> +&usb {
> + status = "okay";
> + extcon = <&usb_id>, <&usb_id>;
> +};
> +
> +&usb_hs_phy {
> + extcon = <&usb_id>;
> +};
> +
> +&smd_rpm_regulators {
> + vdd_l1_l2_l3-supply = <&pm8916_s3>;
> + vdd_l4_l5_l6-supply = <&pm8916_s4>;
> + vdd_l7-supply = <&pm8916_s4>;
> +
> + s3 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1300000>;
> + };
> +
> + s4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2100000>;
> + };
> +
> + l1 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> + };
> +
> + l2 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + l4 {
> + regulator-min-microvolt = <2050000>;
> + regulator-max-microvolt = <2050000>;
> + };
> +
> + l5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l7 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l8 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2900000>;
> + };
> +
> + l9 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + l10 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + l11 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + regulator-allow-set-load;
> + regulator-system-load = <200000>;
> + };
> +
> + l12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + };
> +
> + l13 {
> + regulator-min-microvolt = <3075000>;
> + regulator-max-microvolt = <3075000>;
> + };
> +
> + l14 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + l15 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + l16 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + l17 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + };
> +
> + l18 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2700000>;
> + };
> +};
> +
> +&msmgpio {
> + accel_int_default: accel-int-default {
> + pins = "gpio31";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + gpio_keys_default: gpio-keys-default {
> + pins = "gpio107";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + gyro_int_default: gyro-int-default {
> + pins = "gpio97", "gpio98";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + mag_reset_default: mag-reset-default {
> + pins = "gpio8";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + proximity_int_default: proximity-int-default {
> + pins = "gpio12";
> + function = "gpio";
> +
> + drive-strength = <6>;
> + bias-pull-up;
> + };
> +
> + usb_id_default: usb-id-default {
> + pins = "gpio69";
> + function = "gpio";
> +
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> +};
> --
> 2.29.2
>
>
>
next prev parent reply other threads:[~2021-01-30 11:28 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-30 10:57 [PATCH v2 0/4] Alcatel Idol 3 (4.7") smartphone support Vincent Knecht
2021-01-30 10:57 ` [PATCH v2 1/4] dt-bindings: vendor-prefixes: add Alcatel Vincent Knecht
2021-01-30 10:57 ` [PATCH v2 2/4] arm64: dts: qcom: Add device tree for Alcatel Idol 3 (4.7") Vincent Knecht
2021-01-30 11:25 ` Stephan Gerhold [this message]
2021-01-30 15:45 ` Konrad Dybcio
2021-01-30 10:57 ` [PATCH v2 3/4] arm64: dts: qcom: Disable MDSS by default for 8916/8016 devices Vincent Knecht
2021-01-30 11:28 ` Stephan Gerhold
2021-01-30 15:40 ` Konrad Dybcio
2021-01-30 10:57 ` [PATCH v2 4/4] arm64: dts: qcom: msm8916-alcatel-idol347: Add framebuffer support Vincent Knecht
2021-01-30 15:42 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YBVCHvGy5VwTThZ4@gerhold.net \
--to=stephan@gerhold.net \
--cc=Max.Merchel@tq-group.com \
--cc=agross@kernel.org \
--cc=allen.chen@ite.com.tw \
--cc=arnd@arndb.de \
--cc=bjorn.andersson@linaro.org \
--cc=daniel@0x0f.com \
--cc=devicetree@vger.kernel.org \
--cc=krzk@kernel.org \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@rempel-privat.de \
--cc=phone-devel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=shawnguo@kernel.org \
--cc=vincent.knecht@mailoo.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).