From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Hans de Goede <hdegoede@redhat.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Kate Hsuan <hpa@redhat.com>,
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
linux-kernel@vger.kernel.org,
platform-driver-x86@vger.kernel.org, Dell.Client.Kernel@dell.com
Cc: Mark Gross <mgross@linux.intel.com>,
Alex Hung <alex.hung@canonical.com>,
Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>,
David E Box <david.e.box@intel.com>,
Zha Qipeng <qipeng.zha@intel.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
"David E. Box" <david.e.box@linux.intel.com>,
AceLan Kao <acelan.kao@canonical.com>,
Jithu Joseph <jithu.joseph@intel.com>,
Maurice Ma <maurice.ma@intel.com>
Subject: [PATCH v4 06/21] platform/x86: intel_scu: Move to intel sub-directory
Date: Thu, 19 Aug 2021 19:37:20 +0300 [thread overview]
Message-ID: <20210819163735.81803-7-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20210819163735.81803-1-andriy.shevchenko@linux.intel.com>
From: Kate Hsuan <hpa@redhat.com>
Move Intel SCU drivers to intel sub-directory to improve readability.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
MAINTAINERS | 2 +-
drivers/platform/x86/Kconfig | 47 -----------------
drivers/platform/x86/Makefile | 5 --
drivers/platform/x86/intel/Kconfig | 1 +
drivers/platform/x86/intel/Makefile | 1 +
drivers/platform/x86/intel/scu/Kconfig | 51 +++++++++++++++++++
drivers/platform/x86/intel/scu/Makefile | 15 ++++++
.../x86/{intel_scu_ipc.c => intel/scu/ipc.c} | 0
.../scu/ipcutil.c} | 0
.../scu/pcidrv.c} | 0
.../scu/pltdrv.c} | 0
.../x86/{intel_scu_wdt.c => intel/scu/wdt.c} | 0
12 files changed, 69 insertions(+), 53 deletions(-)
create mode 100644 drivers/platform/x86/intel/scu/Kconfig
create mode 100644 drivers/platform/x86/intel/scu/Makefile
rename drivers/platform/x86/{intel_scu_ipc.c => intel/scu/ipc.c} (100%)
rename drivers/platform/x86/{intel_scu_ipcutil.c => intel/scu/ipcutil.c} (100%)
rename drivers/platform/x86/{intel_scu_pcidrv.c => intel/scu/pcidrv.c} (100%)
rename drivers/platform/x86/{intel_scu_pltdrv.c => intel/scu/pltdrv.c} (100%)
rename drivers/platform/x86/{intel_scu_wdt.c => intel/scu/wdt.c} (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index eefe4edb1b3d..aa08fdb02ecb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9527,7 +9527,7 @@ INTEL SCU DRIVERS
M: Mika Westerberg <mika.westerberg@linux.intel.com>
S: Maintained
F: arch/x86/include/asm/intel_scu_ipc.h
-F: drivers/platform/x86/intel_scu_*
+F: drivers/platform/x86/intel/scu/
INTEL SKYLAKE INT3472 ACPI DEVICE DRIVER
M: Daniel Scally <djrscally@gmail.com>
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index aed7570388ef..1b85a1f6fc5f 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1159,53 +1159,6 @@ config INTEL_UNCORE_FREQ_CONTROL
To compile this driver as a module, choose M here: the module
will be called intel-uncore-frequency.
-config INTEL_SCU_IPC
- bool
-
-config INTEL_SCU
- bool
- select INTEL_SCU_IPC
-
-config INTEL_SCU_PCI
- bool "Intel SCU PCI driver"
- depends on PCI
- select INTEL_SCU
- help
- This driver is used to bridge the communications between kernel
- and SCU on some embedded Intel x86 platforms. It also creates
- devices that are connected to the SoC through the SCU.
- Platforms supported:
- Medfield
- Clovertrail
- Merrifield
- Broxton
- Apollo Lake
-
-config INTEL_SCU_PLATFORM
- tristate "Intel SCU platform driver"
- depends on ACPI
- select INTEL_SCU
- help
- This driver is used to bridge the communications between kernel
- and SCU (sometimes called PMC as well). The driver currently
- supports Intel Elkhart Lake and compatible platforms.
-
-config INTEL_SCU_WDT
- bool
- default INTEL_SCU_PCI
- depends on INTEL_MID_WATCHDOG
- help
- This is a specific platform code to instantiate watchdog device
- on ACPI-based Intel MID platforms.
-
-config INTEL_SCU_IPC_UTIL
- tristate "Intel SCU IPC utility driver"
- depends on INTEL_SCU
- help
- The IPC Util driver provides an interface with the SCU enabling
- low level access for debug work and updating the firmware. Say
- N unless you will be doing this on an Intel MID platform.
-
config INTEL_TELEMETRY
tristate "Intel SoC Telemetry Driver"
depends on X86_64
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 1668f7360833..026c97ba68f6 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -127,11 +127,6 @@ obj-$(CONFIG_INTEL_TURBO_MAX_3) += intel_turbo_max_3.o
obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL) += intel-uncore-frequency.o
# Intel PMIC / PMC / P-Unit devices
-obj-$(CONFIG_INTEL_SCU_IPC) += intel_scu_ipc.o
-obj-$(CONFIG_INTEL_SCU_PCI) += intel_scu_pcidrv.o
-obj-$(CONFIG_INTEL_SCU_PLATFORM) += intel_scu_pltdrv.o
-obj-$(CONFIG_INTEL_SCU_WDT) += intel_scu_wdt.o
-obj-$(CONFIG_INTEL_SCU_IPC_UTIL) += intel_scu_ipcutil.o
obj-$(CONFIG_INTEL_TELEMETRY) += intel_telemetry_core.o \
intel_telemetry_pltdrv.o \
intel_telemetry_debugfs.o
diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig
index 7de11636904d..72f4a5b79342 100644
--- a/drivers/platform/x86/intel/Kconfig
+++ b/drivers/platform/x86/intel/Kconfig
@@ -21,6 +21,7 @@ source "drivers/platform/x86/intel/int33fe/Kconfig"
source "drivers/platform/x86/intel/int3472/Kconfig"
source "drivers/platform/x86/intel/pmc/Kconfig"
source "drivers/platform/x86/intel/pmt/Kconfig"
+source "drivers/platform/x86/intel/scu/Kconfig"
config INTEL_BXTWC_PMIC_TMU
tristate "Intel Broxton Whiskey Cove TMU Driver"
diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile
index a1555a1e421d..15e5124d70ec 100644
--- a/drivers/platform/x86/intel/Makefile
+++ b/drivers/platform/x86/intel/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_INTEL_CHT_INT33FE) += int33fe/
obj-$(CONFIG_INTEL_SKL_INT3472) += int3472/
obj-$(CONFIG_INTEL_PMC_CORE) += pmc/
obj-$(CONFIG_INTEL_PMT_CLASS) += pmt/
+obj-$(CONFIG_INTEL_SCU) += scu/
# Intel PMIC / PMC / P-Unit drivers
intel_bxtwc_tmu-y := bxtwc_tmu.o
diff --git a/drivers/platform/x86/intel/scu/Kconfig b/drivers/platform/x86/intel/scu/Kconfig
new file mode 100644
index 000000000000..5ce2554e2b90
--- /dev/null
+++ b/drivers/platform/x86/intel/scu/Kconfig
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Intel x86 Platform-Specific Drivers
+#
+
+config INTEL_SCU_IPC
+ bool
+
+config INTEL_SCU_IPC_UTIL
+ tristate "Intel SCU IPC utility driver"
+ depends on INTEL_SCU
+ help
+ The IPC utility driver provides an interface with the SCU enabling
+ low level access for debug work and updating the firmware.
+ Say N unless you will be doing this on an Intel MID platform.
+
+config INTEL_SCU
+ bool
+ select INTEL_SCU_IPC
+
+config INTEL_SCU_PCI
+ bool "Intel SCU PCI driver"
+ depends on PCI
+ select INTEL_SCU
+ help
+ This driver is used to bridge the communications between kernel
+ and SCU on some embedded Intel x86 platforms. It also creates
+ devices that are connected to the SoC through the SCU.
+ Platforms supported:
+ Medfield
+ Clovertrail
+ Merrifield
+ Broxton
+ Apollo Lake
+
+config INTEL_SCU_PLATFORM
+ tristate "Intel SCU platform driver"
+ depends on ACPI
+ select INTEL_SCU
+ help
+ This driver is used to bridge the communications between kernel
+ and SCU (sometimes called PMC as well). The driver currently
+ supports Intel Elkhart Lake and compatible platforms.
+
+config INTEL_SCU_WDT
+ bool
+ default INTEL_SCU_PCI
+ depends on INTEL_MID_WATCHDOG
+ help
+ This is a specific platform code to instantiate watchdog device
+ on ACPI-based Intel MID platforms.
diff --git a/drivers/platform/x86/intel/scu/Makefile b/drivers/platform/x86/intel/scu/Makefile
new file mode 100644
index 000000000000..601a720f97dc
--- /dev/null
+++ b/drivers/platform/x86/intel/scu/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Intel x86 Platform-Specific Drivers
+#
+
+intel_scu_ipc-y := ipc.o
+obj-$(CONFIG_INTEL_SCU_IPC) += intel_scu_ipc.o
+intel_scu_ipcutil-y := ipcutil.o
+obj-$(CONFIG_INTEL_SCU_IPC_UTIL) += intel_scu_ipcutil.o
+intel_scu_pci-y := pcidrv.o
+obj-$(CONFIG_INTEL_SCU_PCI) += intel_scu_pcidrv.o
+intel_scu_pltdrv-y := pltdrv.o
+obj-$(CONFIG_INTEL_SCU_PLATFORM) += intel_scu_pltdrv.o
+intel_scu_wdt-y := wdt.o
+obj-$(CONFIG_INTEL_SCU_WDT) += intel_scu_wdt.o
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel/scu/ipc.c
similarity index 100%
rename from drivers/platform/x86/intel_scu_ipc.c
rename to drivers/platform/x86/intel/scu/ipc.c
diff --git a/drivers/platform/x86/intel_scu_ipcutil.c b/drivers/platform/x86/intel/scu/ipcutil.c
similarity index 100%
rename from drivers/platform/x86/intel_scu_ipcutil.c
rename to drivers/platform/x86/intel/scu/ipcutil.c
diff --git a/drivers/platform/x86/intel_scu_pcidrv.c b/drivers/platform/x86/intel/scu/pcidrv.c
similarity index 100%
rename from drivers/platform/x86/intel_scu_pcidrv.c
rename to drivers/platform/x86/intel/scu/pcidrv.c
diff --git a/drivers/platform/x86/intel_scu_pltdrv.c b/drivers/platform/x86/intel/scu/pltdrv.c
similarity index 100%
rename from drivers/platform/x86/intel_scu_pltdrv.c
rename to drivers/platform/x86/intel/scu/pltdrv.c
diff --git a/drivers/platform/x86/intel_scu_wdt.c b/drivers/platform/x86/intel/scu/wdt.c
similarity index 100%
rename from drivers/platform/x86/intel_scu_wdt.c
rename to drivers/platform/x86/intel/scu/wdt.c
--
2.32.0
next prev parent reply other threads:[~2021-08-19 16:38 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-19 16:37 [PATCH v4 00/21] platform/x86: Intel platform driver code movement Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 01/21] platform/x86: intel_bxtwc_tmu: Move to intel sub-directory Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 02/21] platform/x86: intel_chtdc_ti_pwrbtn: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 03/21] platform/x86: intel_mrfld_pwrbtn: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 04/21] platform/x86: intel_punit_ipc: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 05/21] platform/x86: intel_pmc_core: " Andy Shevchenko
2021-08-19 16:37 ` Andy Shevchenko [this message]
2021-08-19 16:37 ` [PATCH v4 07/21] platform/x86: intel_telemetry: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 08/21] platform/x86: intel_ips: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 09/21] platform/x86: intel-rst: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 10/21] platform/x86: intel-smartconnect: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 11/21] platform/x86: intel_turbo_max_3: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 12/21] platform/x86: intel-uncore-frequency: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 13/21] platform/x86: intel_speed_select_if: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 14/21] platform/x86: intel_atomisp2: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 15/21] platform/x86: intel-hid: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 16/21] platform/x86: intel_int0002_vgpio: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 17/21] platform/x86: intel_oaktrail: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 18/21] platform/x86: intel-vbtn: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 19/21] platform/x86: intel-wmi-sbl-fw-update: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 20/21] platform/x86: intel-wmi-thunderbolt: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 21/21] platform/x86/intel: scu: Fix doc of intel_scu_ipc_dev_command_with_size() Andy Shevchenko
2021-08-19 17:46 ` [PATCH v4 00/21] platform/x86: Intel platform driver code movement Andy Shevchenko
2021-08-19 18:46 ` Hans de Goede
2021-08-20 10:12 ` Andy Shevchenko
2021-08-20 10:22 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210819163735.81803-7-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=Dell.Client.Kernel@dell.com \
--cc=acelan.kao@canonical.com \
--cc=alex.hung@canonical.com \
--cc=david.e.box@intel.com \
--cc=david.e.box@linux.intel.com \
--cc=hdegoede@redhat.com \
--cc=hpa@redhat.com \
--cc=irenic.rajneesh@gmail.com \
--cc=jithu.joseph@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maurice.ma@intel.com \
--cc=mgross@linux.intel.com \
--cc=mika.westerberg@linux.intel.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=qipeng.zha@intel.com \
--cc=srinivas.pandruvada@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).