From: Zhang Rui <rui.zhang@intel.com>
To: Daniel Lezcano <daniel.lezcano@linaro.org>,
Hans de Goede <hdegoede@redhat.com>,
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
hpa@redhat.com, mgross@linux.intel.com, alex.hung@canonical.com,
sujith.thomas@intel.com, andriy.shevchenko@linux.intel.com
Cc: linux-pm@vger.kernel.org, platform-driver-x86@vger.kernel.org
Subject: Re: [PATCH] thermal/drivers/intel: Move intel_menlow to thermal drivers
Date: Mon, 16 Aug 2021 17:42:37 +0800 [thread overview]
Message-ID: <830b7bb290268ac4a4ba8f9c5542b3fa36aff415.camel@intel.com> (raw)
In-Reply-To: <144b2a35-bd24-2a88-c538-5c7c4a6c4fd1@linaro.org>
On Mon, 2021-08-16 at 10:05 +0200, Daniel Lezcano wrote:
> Hi Hans,
>
> On 16/08/2021 09:55, Hans de Goede wrote:
> > Hi,
> >
> > On 8/16/21 5:53 AM, Srinivas Pandruvada wrote:
> > > Moved drivers/platform/x86/intel_menlow.c to
> > > drivers/thermal/intel.
> > >
> > > Signed-off-by: Srinivas Pandruvada <
> > > srinivas.pandruvada@linux.intel.com>
> >
> > Thank you.
> >
> > Rui, with this upcoming patch-series:
> >
> >
https://lore.kernel.org/platform-driver-x86/c6a90704-5080-d479-0022-58e5d106c026@infradead.org/T/#t
> >
> > drivers/platform/x86/Kconfig + Makefile
> >
> > Are going to see quite a bit of churn, is it ok if I merge this
> > patch
> > through the pdx86 tree to avoid conflicts with all those changes?
> >
> > Rui, if this is ok, may I have your ack for this then ?
>
> As co-maintainer:
>
> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Done, thanks for the reminder.
-rui
>
>
>
> > > ---
> > > MAINTAINERS | 4 ++--
> > > drivers/platform/x86/Kconfig | 10 ----
> > > ------
> > > drivers/platform/x86/Makefile | 1 -
> > > drivers/thermal/intel/Kconfig | 9
> > > +++++++++
> > > drivers/thermal/intel/Makefile | 1 +
> > > drivers/{platform/x86 => thermal/intel}/intel_menlow.c | 0
> > > 6 files changed, 12 insertions(+), 13 deletions(-)
> > > rename drivers/{platform/x86 => thermal/intel}/intel_menlow.c
> > > (100%)
> > >
> > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > index fd25e4ecf0b9..4231aea31a6f 100644
> > > --- a/MAINTAINERS
> > > +++ b/MAINTAINERS
> > > @@ -9459,10 +9459,10 @@ F: include/linux/mfd/intel-m10-
> > > bmc.h
> > >
> > > INTEL MENLOW THERMAL DRIVER
> > > M: Sujith Thomas <sujith.thomas@intel.com>
> > > -L: platform-driver-x86@vger.kernel.org
> > > +L: linux-pm@vger.kernel.org
> > > S: Supported
> > > W: https://01.org/linux-acpi
> > > -F: drivers/platform/x86/intel_menlow.c
> > > +F: drivers/thermal/intel/intel_menlow.c
> > >
> > > INTEL P-Unit IPC DRIVER
> > > M: Zha Qipeng <qipeng.zha@intel.com>
> > > diff --git a/drivers/platform/x86/Kconfig
> > > b/drivers/platform/x86/Kconfig
> > > index d12db6c316ea..da312426b4a5 100644
> > > --- a/drivers/platform/x86/Kconfig
> > > +++ b/drivers/platform/x86/Kconfig
> > > @@ -720,16 +720,6 @@ config INTEL_INT0002_VGPIO
> > > To compile this driver as a module, choose M here: the module
> > > will
> > > be called intel_int0002_vgpio.
> > >
> > > -config INTEL_MENLOW
> > > - tristate "Thermal Management driver for Intel menlow platform"
> > > - depends on ACPI_THERMAL
> > > - select THERMAL
> > > - help
> > > - ACPI thermal management enhancement driver on
> > > - Intel Menlow platform.
> > > -
> > > - If unsure, say N.
> > > -
> > > config INTEL_OAKTRAIL
> > > tristate "Intel Oaktrail Platform Extras"
> > > depends on ACPI
> > > diff --git a/drivers/platform/x86/Makefile
> > > b/drivers/platform/x86/Makefile
> > > index 7ee369aab10d..0d3af23f1186 100644
> > > --- a/drivers/platform/x86/Makefile
> > > +++ b/drivers/platform/x86/Makefile
> > > @@ -72,7 +72,6 @@ obj-$(CONFIG_INTEL_ATOMISP2_LED) +=
> > > intel_atomisp2_led.o
> > > obj-$(CONFIG_INTEL_ATOMISP2_PM) += intel_atomisp2_pm.o
> > > obj-$(CONFIG_INTEL_HID_EVENT) += intel-hid.o
> > > obj-$(CONFIG_INTEL_INT0002_VGPIO) +=
> > > intel_int0002_vgpio.o
> > > -obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o
> > > obj-$(CONFIG_INTEL_OAKTRAIL) += intel_oaktrail.o
> > > obj-$(CONFIG_INTEL_VBTN) += intel-vbtn.o
> > >
> > > diff --git a/drivers/thermal/intel/Kconfig
> > > b/drivers/thermal/intel/Kconfig
> > > index e4299ca3423c..c83ea5d04a1d 100644
> > > --- a/drivers/thermal/intel/Kconfig
> > > +++ b/drivers/thermal/intel/Kconfig
> > > @@ -90,3 +90,12 @@ config INTEL_TCC_COOLING
> > > Note that, on different platforms, the behavior might be
> > > different
> > > on how fast the setting takes effect, and how much the CPU
> > > frequency
> > > is reduced.
> > > +
> > > +config INTEL_MENLOW
> > > + tristate "Thermal Management driver for Intel menlow platform"
> > > + depends on ACPI_THERMAL
> > > + help
> > > + ACPI thermal management enhancement driver on
> > > + Intel Menlow platform.
> > > +
> > > + If unsure, say N.
> > > diff --git a/drivers/thermal/intel/Makefile
> > > b/drivers/thermal/intel/Makefile
> > > index 5ff2afa388f7..960b56268b4a 100644
> > > --- a/drivers/thermal/intel/Makefile
> > > +++ b/drivers/thermal/intel/Makefile
> > > @@ -12,3 +12,4 @@ obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) +=
> > > intel_bxt_pmic_thermal.o
> > > obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o
> > > obj-$(CONFIG_INTEL_TCC_COOLING) += intel_tcc_cooling.o
> > > obj-$(CONFIG_X86_THERMAL_VECTOR) += therm_throt.o
> > > +obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o
> > > diff --git a/drivers/platform/x86/intel_menlow.c
> > > b/drivers/thermal/intel/intel_menlow.c
> > > similarity index 100%
> > > rename from drivers/platform/x86/intel_menlow.c
> > > rename to drivers/thermal/intel/intel_menlow.c
> > >
>
>
next prev parent reply other threads:[~2021-08-16 9:42 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-16 3:53 [PATCH] thermal/drivers/intel: Move intel_menlow to thermal drivers Srinivas Pandruvada
2021-08-16 7:55 ` Hans de Goede
2021-08-16 8:05 ` Daniel Lezcano
2021-08-16 9:42 ` Zhang Rui [this message]
2021-08-16 9:41 ` Zhang Rui
2021-08-17 12:20 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=830b7bb290268ac4a4ba8f9c5542b3fa36aff415.camel@intel.com \
--to=rui.zhang@intel.com \
--cc=alex.hung@canonical.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=daniel.lezcano@linaro.org \
--cc=hdegoede@redhat.com \
--cc=hpa@redhat.com \
--cc=linux-pm@vger.kernel.org \
--cc=mgross@linux.intel.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=srinivas.pandruvada@linux.intel.com \
--cc=sujith.thomas@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).