From: Filip Bozuta <Filip.Bozuta@rt-rk.com>
To: qemu-devel@nongnu.org
Cc: riku.voipio@iki.fi, laurent@vivier.eu
Subject: [PATCH 03/12] linux-user: Add support for getting/setting RTC periodic interrupt and epoch using ioctls
Date: Thu, 9 Jan 2020 13:59:14 +0100 [thread overview]
Message-ID: <1578574763-8327-4-git-send-email-Filip.Bozuta@rt-rk.com> (raw)
In-Reply-To: <1578574763-8327-1-git-send-email-Filip.Bozuta@rt-rk.com>
This patch implements functionalities of following ioctls:
RTC_IRQP_READ, RTC_IRQP_SET - Getting/Setting IRQ rate
Read and set the frequency for periodic interrupts, for RTCs
that support periodic interrupts. The periodic interrupt must
be separately enabled or disabled using the RTC_PIE_ON,
RTC_PIE_OFF requests. The third ioctl's argument is an
unsigned long * or an unsigned long, respectively. The value
is the frequency in interrupts per second. The set of allow‐
able frequencies is the multiples of two in the range 2 to
8192. Only a privileged process (i.e., one having the
CAP_SYS_RESOURCE capability) can set frequencies above the
value specified in /proc/sys/dev/rtc/max-user-freq. (This
file contains the value 64 by default.)
RTC_EPOCH_READ, RTC_EPOCH_SET - Getting/Setting epoch
Many RTCs encode the year in an 8-bit register which is either
interpreted as an 8-bit binary number or as a BCD number. In
both cases, the number is interpreted relative to this RTC's
Epoch. The RTC's Epoch is initialized to 1900 on most systems
but on Alpha and MIPS it might also be initialized to 1952,
1980, or 2000, depending on the value of an RTC register for
the year. With some RTCs, these operations can be used to
read or to set the RTC's Epoch, respectively. The third
ioctl's argument is an unsigned long * or an unsigned long,
respectively, and the value returned (or assigned) is the
Epoch. To set the RTC's Epoch the process must be privileged
(i.e., have the CAP_SYS_TIME capability).
Implementation notes:
All ioctls in this patch have a pointer to 'ulong' as their
third argument. That is the reason why corresponding parts
of added code in linux-user/syscall_defs.h contain special
handling related to 'ulong' type: they use 'abi_ulong' type
to make sure that ioctl's code is calculated correctly for
both 32-bit and 64-bit targets. Also, 'MK_PTR(TYPE_ULONG)'
is used for the similar reason in linux-user/ioctls.h.
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
---
linux-user/ioctls.h | 4 ++++
linux-user/syscall_defs.h | 4 ++++
2 files changed, 8 insertions(+)
diff --git a/linux-user/ioctls.h b/linux-user/ioctls.h
index f472794..accbdee 100644
--- a/linux-user/ioctls.h
+++ b/linux-user/ioctls.h
@@ -81,6 +81,10 @@
IOCTL(RTC_ALM_SET, IOC_W, MK_PTR(MK_STRUCT(STRUCT_rtc_time)))
IOCTL(RTC_RD_TIME, IOC_R, MK_PTR(MK_STRUCT(STRUCT_rtc_time)))
IOCTL(RTC_SET_TIME, IOC_W, MK_PTR(MK_STRUCT(STRUCT_rtc_time)))
+ IOCTL(RTC_IRQP_READ, IOC_R, MK_PTR(TYPE_ULONG))
+ IOCTL(RTC_IRQP_SET, IOC_W, TYPE_ULONG)
+ IOCTL(RTC_EPOCH_READ, IOC_R, MK_PTR(TYPE_ULONG))
+ IOCTL(RTC_EPOCH_SET, IOC_W, TYPE_ULONG)
IOCTL(BLKROSET, IOC_W, MK_PTR(TYPE_INT))
IOCTL(BLKROGET, IOC_R, MK_PTR(TYPE_INT))
diff --git a/linux-user/syscall_defs.h b/linux-user/syscall_defs.h
index f0bf09d..bbfa935 100644
--- a/linux-user/syscall_defs.h
+++ b/linux-user/syscall_defs.h
@@ -776,6 +776,10 @@ struct target_pollfd {
#define TARGET_RTC_ALM_SET TARGET_IOW('p', 0x07, struct rtc_time)
#define TARGET_RTC_RD_TIME TARGET_IOR('p', 0x09, struct rtc_time)
#define TARGET_RTC_SET_TIME TARGET_IOW('p', 0x0a, struct rtc_time)
+#define TARGET_RTC_IRQP_READ TARGET_IOR('p', 0x0b, abi_ulong)
+#define TARGET_RTC_IRQP_SET TARGET_IOW('p', 0x0c, abi_ulong)
+#define TARGET_RTC_EPOCH_READ TARGET_IOR('p', 0x0d, abi_ulong)
+#define TARGET_RTC_EPOCH_SET TARGET_IOW('p', 0x0e, abi_ulong)
#if defined(TARGET_ALPHA) || defined(TARGET_MIPS) || defined(TARGET_SH4) || \
defined(TARGET_XTENSA)
--
2.7.4
next prev parent reply other threads:[~2020-01-09 13:06 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-09 12:59 [PATCH 00/12] linux-user: Add support for real time clock and Filip Bozuta
2020-01-09 12:59 ` [PATCH 01/12] linux-user: Add support for enabling/disabling RTC features using ioctls Filip Bozuta
2020-01-14 12:28 ` Laurent Vivier
2020-01-09 12:59 ` [PATCH 02/12] linux-user: Add support for getting/setting RTC time and alarm " Filip Bozuta
2020-01-14 12:30 ` Laurent Vivier
2020-01-09 12:59 ` Filip Bozuta [this message]
2020-01-14 12:36 ` [PATCH 03/12] linux-user: Add support for getting/setting RTC periodic interrupt and epoch " Laurent Vivier
2020-01-09 12:59 ` [PATCH 04/12] linux-user: Add support for getting/setting RTC wakeup alarm " Filip Bozuta
2020-01-14 12:37 ` Laurent Vivier
2020-01-09 12:59 ` [PATCH 05/12] linux-user: Add support for getting/setting RTC PLL correction " Filip Bozuta
2020-01-14 12:39 ` Laurent Vivier
2020-01-09 12:59 ` [PATCH 06/12] linux-user: Add support for read/clear RTC voltage low detector " Filip Bozuta
2020-01-14 12:40 ` Laurent Vivier
2020-01-09 12:59 ` [PATCH 07/12] linux-user: Add support for getting alsa timer version and id Filip Bozuta
2020-01-14 12:42 ` Laurent Vivier
2020-01-09 12:59 ` [PATCH 08/12] linux-user: Add support for setting alsa timer enhanced read using ioctl Filip Bozuta
2020-01-14 12:44 ` Laurent Vivier
2020-01-09 12:59 ` [PATCH 09/12] linux-user: Add support for getting/setting specified alsa timer parameters using ioctls Filip Bozuta
2020-01-14 12:52 ` Laurent Vivier
2020-01-09 12:59 ` [PATCH 10/12] linux-user: Add support for selecting alsa timer using ioctl Filip Bozuta
2020-01-14 12:53 ` Laurent Vivier
2020-01-09 12:59 ` [PATCH 11/12] linux-user: Add support for getting/setting selected alsa timer parameters using ioctls Filip Bozuta
2020-01-14 13:09 ` Laurent Vivier
2020-01-09 12:59 ` [PATCH 12/12] linux-user: Add support for selected alsa timer instructions " Filip Bozuta
2020-01-14 12:57 ` Laurent Vivier
2020-01-14 12:39 ` [PATCH 00/12] linux-user: Add support for real time clock and Philippe Mathieu-Daudé
2020-01-14 12:47 ` Laurent Vivier
2020-01-15 15:53 Filip Bozuta
2020-01-15 15:53 ` [PATCH 03/12] linux-user: Add support for getting/setting RTC periodic interrupt and epoch using ioctls Filip Bozuta
2020-01-15 16:46 ` Laurent Vivier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1578574763-8327-4-git-send-email-Filip.Bozuta@rt-rk.com \
--to=filip.bozuta@rt-rk.com \
--cc=laurent@vivier.eu \
--cc=qemu-devel@nongnu.org \
--cc=riku.voipio@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).