qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
To: <qemu-devel@nongnu.org>, <qemu-arm@nongnu.org>,
	<eric.auger@redhat.com>, <imammedo@redhat.com>
Cc: peter.maydell@linaro.org, sameo@linux.intel.com,
	ard.biesheuvel@linaro.org, linuxarm@huawei.com,
	xuwei5@hisilicon.com, shannon.zhaosl@gmail.com,
	sebastien.boeuf@intel.com, lersek@redhat.com
Subject: [Qemu-devel] [PATCH v5 1/8] hw/acpi: Make ACPI IO address space configurable
Date: Wed, 22 May 2019 17:22:45 +0100	[thread overview]
Message-ID: <20190522162252.28568-2-shameerali.kolothum.thodi@huawei.com> (raw)
In-Reply-To: <20190522162252.28568-1-shameerali.kolothum.thodi@huawei.com>

This is in preparation for adding support for ARM64 platforms
where it doesn't use port mapped IO for ACPI IO space.

Also move few MEMORY_* definitions to header so that other memory
hotplug event signalling mechanisms (eg. Generic Event Device on
HW-reduced acpi platforms) can use the same from their respective
event handler code.

Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
---
 hw/acpi/memory_hotplug.c         | 25 ++++++++++++++-----------
 hw/i386/acpi-build.c             |  3 ++-
 include/hw/acpi/memory_hotplug.h |  9 +++++++--
 3 files changed, 23 insertions(+), 14 deletions(-)

diff --git a/hw/acpi/memory_hotplug.c b/hw/acpi/memory_hotplug.c
index 297812d5f7..c724f5f1e4 100644
--- a/hw/acpi/memory_hotplug.c
+++ b/hw/acpi/memory_hotplug.c
@@ -29,12 +29,9 @@
 #define MEMORY_SLOT_PROXIMITY_METHOD "MPXM"
 #define MEMORY_SLOT_EJECT_METHOD     "MEJ0"
 #define MEMORY_SLOT_NOTIFY_METHOD    "MTFY"
-#define MEMORY_SLOT_SCAN_METHOD      "MSCN"
 #define MEMORY_HOTPLUG_DEVICE        "MHPD"
-#define MEMORY_HOTPLUG_IO_LEN         24
-#define MEMORY_DEVICES_CONTAINER     "\\_SB.MHPC"
 
-static uint16_t memhp_io_base;
+static hwaddr memhp_io_base;
 
 static ACPIOSTInfo *acpi_memory_device_status(int slot, MemStatus *mdev)
 {
@@ -209,7 +206,7 @@ static const MemoryRegionOps acpi_memory_hotplug_ops = {
 };
 
 void acpi_memory_hotplug_init(MemoryRegion *as, Object *owner,
-                              MemHotplugState *state, uint16_t io_base)
+                              MemHotplugState *state, hwaddr io_base)
 {
     MachineState *machine = MACHINE(qdev_get_machine());
 
@@ -342,7 +339,8 @@ const VMStateDescription vmstate_memory_hotplug = {
 
 void build_memory_hotplug_aml(Aml *table, uint32_t nr_mem,
                               const char *res_root,
-                              const char *event_handler_method)
+                              const char *event_handler_method,
+                              AmlRegionSpace rs)
 {
     int i;
     Aml *ifctx;
@@ -365,14 +363,19 @@ void build_memory_hotplug_aml(Aml *table, uint32_t nr_mem,
             aml_name_decl("_UID", aml_string("Memory hotplug resources")));
 
         crs = aml_resource_template();
-        aml_append(crs,
-            aml_io(AML_DECODE16, memhp_io_base, memhp_io_base, 0,
-                   MEMORY_HOTPLUG_IO_LEN)
-        );
+        if (rs == AML_SYSTEM_IO) {
+            aml_append(crs,
+                aml_io(AML_DECODE16, memhp_io_base, memhp_io_base, 0,
+                       MEMORY_HOTPLUG_IO_LEN)
+            );
+        } else {
+            aml_append(crs, aml_memory32_fixed(memhp_io_base,
+                            MEMORY_HOTPLUG_IO_LEN, AML_READ_WRITE));
+        }
         aml_append(mem_ctrl_dev, aml_name_decl("_CRS", crs));
 
         aml_append(mem_ctrl_dev, aml_operation_region(
-            MEMORY_HOTPLUG_IO_REGION, AML_SYSTEM_IO,
+            MEMORY_HOTPLUG_IO_REGION, rs,
             aml_int(memhp_io_base), MEMORY_HOTPLUG_IO_LEN)
         );
 
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index b4ec14e349..fe263fd558 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -1864,7 +1864,8 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
         build_cpus_aml(dsdt, machine, opts, pm->cpu_hp_io_base,
                        "\\_SB.PCI0", "\\_GPE._E02");
     }
-    build_memory_hotplug_aml(dsdt, nr_mem, "\\_SB.PCI0", "\\_GPE._E03");
+    build_memory_hotplug_aml(dsdt, nr_mem, "\\_SB.PCI0",
+                             "\\_GPE._E03", AML_SYSTEM_IO);
 
     scope =  aml_scope("_GPE");
     {
diff --git a/include/hw/acpi/memory_hotplug.h b/include/hw/acpi/memory_hotplug.h
index 77c65765d6..e3a4b89235 100644
--- a/include/hw/acpi/memory_hotplug.h
+++ b/include/hw/acpi/memory_hotplug.h
@@ -5,6 +5,10 @@
 #include "hw/acpi/acpi.h"
 #include "hw/acpi/aml-build.h"
 
+#define MEMORY_SLOT_SCAN_METHOD      "MSCN"
+#define MEMORY_DEVICES_CONTAINER     "\\_SB.MHPC"
+#define MEMORY_HOTPLUG_IO_LEN         24
+
 /**
  * MemStatus:
  * @is_removing: the memory device in slot has been requested to be ejected.
@@ -29,7 +33,7 @@ typedef struct MemHotplugState {
 } MemHotplugState;
 
 void acpi_memory_hotplug_init(MemoryRegion *as, Object *owner,
-                              MemHotplugState *state, uint16_t io_base);
+                              MemHotplugState *state, hwaddr io_base);
 
 void acpi_memory_plug_cb(HotplugHandler *hotplug_dev, MemHotplugState *mem_st,
                          DeviceState *dev, Error **errp);
@@ -48,5 +52,6 @@ void acpi_memory_ospm_status(MemHotplugState *mem_st, ACPIOSTInfoList ***list);
 
 void build_memory_hotplug_aml(Aml *table, uint32_t nr_mem,
                               const char *res_root,
-                              const char *event_handler_method);
+                              const char *event_handler_method,
+                              AmlRegionSpace rs);
 #endif
-- 
2.17.1




  reply	other threads:[~2019-05-22 16:26 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-22 16:22 [Qemu-devel] [PATCH v5 0/8] ARM virt: ACPI memory hotplug support Shameer Kolothum
2019-05-22 16:22 ` Shameer Kolothum [this message]
2019-05-22 16:22 ` [Qemu-devel] [PATCH v5 2/8] hw/acpi: Do not create memory hotplug method when handler is not defined Shameer Kolothum
2019-06-20 12:45   ` Igor Mammedov
2019-05-22 16:22 ` [Qemu-devel] [PATCH v5 3/8] hw/acpi: Add ACPI Generic Event Device Support Shameer Kolothum
2019-06-18 12:40   ` Auger Eric
2019-06-19  8:14     ` Shameerali Kolothum Thodi
2019-05-22 16:22 ` [Qemu-devel] [PATCH v5 4/8] hw/arm/virt: Add memory hotplug framework Shameer Kolothum
2019-06-18 12:42   ` Auger Eric
2019-06-19  8:16     ` Shameerali Kolothum Thodi
2019-05-22 16:22 ` [Qemu-devel] [PATCH v5 5/8] hw/arm/virt: Enable device memory cold/hot plug with ACPI boot Shameer Kolothum
2019-06-18 12:43   ` Auger Eric
2019-05-22 16:22 ` [Qemu-devel] [PATCH v5 6/8] hw/arm/virt-acpi-build: Add PC-DIMM in SRAT Shameer Kolothum
2019-05-22 16:22 ` [Qemu-devel] [PATCH v5 7/8] hw/acpi: Add system power down support to GED Shameer Kolothum
2019-06-18 12:43   ` Auger Eric
2019-05-22 16:22 ` [Qemu-devel] [PATCH v5 8/8] hw/arm: Use GED for system_powerdown event Shameer Kolothum
2019-06-18 12:49   ` Auger Eric
2019-06-18 12:52 ` [Qemu-devel] [PATCH v5 0/8] ARM virt: ACPI memory hotplug support Auger Eric
2019-06-18 12:57   ` Peter Maydell
2019-06-18 13:44     ` Auger Eric
2019-06-19  8:18       ` Shameerali Kolothum Thodi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190522162252.28568-2-shameerali.kolothum.thodi@huawei.com \
    --to=shameerali.kolothum.thodi@huawei.com \
    --cc=ard.biesheuvel@linaro.org \
    --cc=eric.auger@redhat.com \
    --cc=imammedo@redhat.com \
    --cc=lersek@redhat.com \
    --cc=linuxarm@huawei.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=sameo@linux.intel.com \
    --cc=sebastien.boeuf@intel.com \
    --cc=shannon.zhaosl@gmail.com \
    --cc=xuwei5@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).