qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
To: <qemu-devel@nongnu.org>, <qemu-arm@nongnu.org>,
	<eric.auger@redhat.com>, <imammedo@redhat.com>
Cc: peter.maydell@linaro.org, sameo@linux.intel.com,
	ard.biesheuvel@linaro.org, linuxarm@huawei.com,
	xuwei5@hisilicon.com, shannon.zhaosl@gmail.com,
	sebastien.boeuf@intel.com, lersek@redhat.com
Subject: [Qemu-devel] [PATCH-for-4.2 v9 01/12] hw/acpi: Make ACPI IO address space configurable
Date: Tue, 13 Aug 2019 22:05:28 +0100	[thread overview]
Message-ID: <20190813210539.31164-2-shameerali.kolothum.thodi@huawei.com> (raw)
In-Reply-To: <20190813210539.31164-1-shameerali.kolothum.thodi@huawei.com>

This is in preparation for adding support for ARM64 platforms
where it doesn't use port mapped IO for ACPI IO space. We are
making changes so that MMIO region can be accommodated
and board can pass the base address into the aml build function.

Also move few MEMORY_* definitions to header so that other memory
hotplug event signalling mechanisms (eg. Generic Event Device on
HW-reduced acpi platforms) can use the same from their respective
event handler code.

Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
---
v8 --> v9
  -base address is an input into build_memory_hotplug_aml()
  -Removed R-by tags from Igor and Eric for now.
---
 hw/acpi/memory_hotplug.c         | 29 ++++++++++++++---------------
 hw/i386/acpi-build.c             |  4 +++-
 hw/i386/pc.c                     |  3 +++
 include/hw/acpi/memory_hotplug.h |  9 +++++++--
 include/hw/i386/pc.h             |  3 +++
 5 files changed, 30 insertions(+), 18 deletions(-)

diff --git a/hw/acpi/memory_hotplug.c b/hw/acpi/memory_hotplug.c
index 297812d5f7..1734d4b44f 100644
--- a/hw/acpi/memory_hotplug.c
+++ b/hw/acpi/memory_hotplug.c
@@ -29,12 +29,7 @@
 #define MEMORY_SLOT_PROXIMITY_METHOD "MPXM"
 #define MEMORY_SLOT_EJECT_METHOD     "MEJ0"
 #define MEMORY_SLOT_NOTIFY_METHOD    "MTFY"
-#define MEMORY_SLOT_SCAN_METHOD      "MSCN"
 #define MEMORY_HOTPLUG_DEVICE        "MHPD"
-#define MEMORY_HOTPLUG_IO_LEN         24
-#define MEMORY_DEVICES_CONTAINER     "\\_SB.MHPC"
-
-static uint16_t memhp_io_base;
 
 static ACPIOSTInfo *acpi_memory_device_status(int slot, MemStatus *mdev)
 {
@@ -209,7 +204,7 @@ static const MemoryRegionOps acpi_memory_hotplug_ops = {
 };
 
 void acpi_memory_hotplug_init(MemoryRegion *as, Object *owner,
-                              MemHotplugState *state, uint16_t io_base)
+                              MemHotplugState *state, hwaddr io_base)
 {
     MachineState *machine = MACHINE(qdev_get_machine());
 
@@ -218,12 +213,10 @@ void acpi_memory_hotplug_init(MemoryRegion *as, Object *owner,
         return;
     }
 
-    assert(!memhp_io_base);
-    memhp_io_base = io_base;
     state->devs = g_malloc0(sizeof(*state->devs) * state->dev_count);
     memory_region_init_io(&state->io, owner, &acpi_memory_hotplug_ops, state,
                           "acpi-mem-hotplug", MEMORY_HOTPLUG_IO_LEN);
-    memory_region_add_subregion(as, memhp_io_base, &state->io);
+    memory_region_add_subregion(as, io_base, &state->io);
 }
 
 /**
@@ -342,7 +335,8 @@ const VMStateDescription vmstate_memory_hotplug = {
 
 void build_memory_hotplug_aml(Aml *table, uint32_t nr_mem,
                               const char *res_root,
-                              const char *event_handler_method)
+                              const char *event_handler_method,
+                              AmlRegionSpace rs, hwaddr memhp_io_base)
 {
     int i;
     Aml *ifctx;
@@ -365,14 +359,19 @@ void build_memory_hotplug_aml(Aml *table, uint32_t nr_mem,
             aml_name_decl("_UID", aml_string("Memory hotplug resources")));
 
         crs = aml_resource_template();
-        aml_append(crs,
-            aml_io(AML_DECODE16, memhp_io_base, memhp_io_base, 0,
-                   MEMORY_HOTPLUG_IO_LEN)
-        );
+        if (rs == AML_SYSTEM_IO) {
+            aml_append(crs,
+                aml_io(AML_DECODE16, memhp_io_base, memhp_io_base, 0,
+                       MEMORY_HOTPLUG_IO_LEN)
+            );
+        } else {
+            aml_append(crs, aml_memory32_fixed(memhp_io_base,
+                            MEMORY_HOTPLUG_IO_LEN, AML_READ_WRITE));
+        }
         aml_append(mem_ctrl_dev, aml_name_decl("_CRS", crs));
 
         aml_append(mem_ctrl_dev, aml_operation_region(
-            MEMORY_HOTPLUG_IO_REGION, AML_SYSTEM_IO,
+            MEMORY_HOTPLUG_IO_REGION, rs,
             aml_int(memhp_io_base), MEMORY_HOTPLUG_IO_LEN)
         );
 
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index f3fdfefcd5..e76d6631ea 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -1871,7 +1871,9 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
         build_cpus_aml(dsdt, machine, opts, pm->cpu_hp_io_base,
                        "\\_SB.PCI0", "\\_GPE._E02");
     }
-    build_memory_hotplug_aml(dsdt, nr_mem, "\\_SB.PCI0", "\\_GPE._E03");
+    build_memory_hotplug_aml(dsdt, nr_mem, "\\_SB.PCI0",
+                             "\\_GPE._E03", AML_SYSTEM_IO,
+                             pcms->memhp_io_base);
 
     scope =  aml_scope("_GPE");
     {
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index 549c437050..be973cea99 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -1936,6 +1936,9 @@ void pc_memory_init(PCMachineState *pcms,
 
     /* Init default IOAPIC address space */
     pcms->ioapic_as = &address_space_memory;
+
+    /* Init ACPI memory hotplug IO base address */
+    pcms->memhp_io_base = ACPI_MEMORY_HOTPLUG_BASE;
 }
 
 /*
diff --git a/include/hw/acpi/memory_hotplug.h b/include/hw/acpi/memory_hotplug.h
index 77c65765d6..dfe9cf3fde 100644
--- a/include/hw/acpi/memory_hotplug.h
+++ b/include/hw/acpi/memory_hotplug.h
@@ -5,6 +5,10 @@
 #include "hw/acpi/acpi.h"
 #include "hw/acpi/aml-build.h"
 
+#define MEMORY_SLOT_SCAN_METHOD      "MSCN"
+#define MEMORY_DEVICES_CONTAINER     "\\_SB.MHPC"
+#define MEMORY_HOTPLUG_IO_LEN         24
+
 /**
  * MemStatus:
  * @is_removing: the memory device in slot has been requested to be ejected.
@@ -29,7 +33,7 @@ typedef struct MemHotplugState {
 } MemHotplugState;
 
 void acpi_memory_hotplug_init(MemoryRegion *as, Object *owner,
-                              MemHotplugState *state, uint16_t io_base);
+                              MemHotplugState *state, hwaddr io_base);
 
 void acpi_memory_plug_cb(HotplugHandler *hotplug_dev, MemHotplugState *mem_st,
                          DeviceState *dev, Error **errp);
@@ -48,5 +52,6 @@ void acpi_memory_ospm_status(MemHotplugState *mem_st, ACPIOSTInfoList ***list);
 
 void build_memory_hotplug_aml(Aml *table, uint32_t nr_mem,
                               const char *res_root,
-                              const char *event_handler_method);
+                              const char *event_handler_method,
+                              AmlRegionSpace rs, hwaddr memhp_io_base);
 #endif
diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h
index 859b64c51d..49b47535cf 100644
--- a/include/hw/i386/pc.h
+++ b/include/hw/i386/pc.h
@@ -69,6 +69,9 @@ struct PCMachineState {
     /* Address space used by IOAPIC device. All IOAPIC interrupts
      * will be translated to MSI messages in the address space. */
     AddressSpace *ioapic_as;
+
+    /* ACPI Memory hotplug IO base address */
+    hwaddr memhp_io_base;
 };
 
 #define PC_MACHINE_ACPI_DEVICE_PROP "acpi-device"
-- 
2.17.1




  reply	other threads:[~2019-08-13 21:09 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-13 21:05 [Qemu-devel] [PATCH-for-4.2 v9 00/12] ARM virt: ACPI memory hotplug support Shameer Kolothum
2019-08-13 21:05 ` Shameer Kolothum [this message]
2019-08-15  8:42   ` [Qemu-devel] [PATCH-for-4.2 v9 01/12] hw/acpi: Make ACPI IO address space configurable Shameerali Kolothum Thodi
2019-08-29  8:45     ` Igor Mammedov
2019-08-29 11:04       ` Shameerali Kolothum Thodi
2019-08-29 12:38         ` Igor Mammedov
2019-08-29 13:45           ` Shameerali Kolothum Thodi
2019-09-01 11:17   ` Auger Eric
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 02/12] hw/acpi: Do not create memory hotplug method when handler is not defined Shameer Kolothum
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 03/12] hw/acpi: Add ACPI Generic Event Device Support Shameer Kolothum
2019-09-01 11:17   ` Auger Eric
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 04/12] hw/arm/virt: Add memory hotplug framework Shameer Kolothum
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 05/12] hw/arm/virt: Add 4.2 machine type Shameer Kolothum
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 06/12] hw/arm/virt: Enable device memory cold/hot plug with ACPI boot Shameer Kolothum
2019-09-01 11:18   ` Auger Eric
2019-09-01 11:22     ` Auger Eric
2019-09-02  9:34       ` Shameerali Kolothum Thodi
2019-09-02  9:21     ` Shameerali Kolothum Thodi
2019-09-02  9:32       ` Auger Eric
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 07/12] hw/arm/virt-acpi-build: Add PC-DIMM in SRAT Shameer Kolothum
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 08/12] hw/arm: Factor out powerdown notifier from GPIO Shameer Kolothum
2019-09-02  7:37   ` Auger Eric
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 09/12] hw/arm: Use GED for system_powerdown event Shameer Kolothum
2019-09-02  7:37   ` Auger Eric
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 10/12] docs/specs: Add ACPI GED documentation Shameer Kolothum
2019-09-01 11:20   ` Auger Eric
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 11/12] tests: add dummy ACPI tables for arm/virt board Shameer Kolothum
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 12/12] tests: Add bios tests to arm/virt Shameer Kolothum
2019-08-14  6:46 ` [Qemu-devel] [PATCH-for-4.2 v9 00/12] ARM virt: ACPI memory hotplug support no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190813210539.31164-2-shameerali.kolothum.thodi@huawei.com \
    --to=shameerali.kolothum.thodi@huawei.com \
    --cc=ard.biesheuvel@linaro.org \
    --cc=eric.auger@redhat.com \
    --cc=imammedo@redhat.com \
    --cc=lersek@redhat.com \
    --cc=linuxarm@huawei.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=sameo@linux.intel.com \
    --cc=sebastien.boeuf@intel.com \
    --cc=shannon.zhaosl@gmail.com \
    --cc=xuwei5@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).