From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, richard.henderson@linaro.org,
"Philippe Mathieu-Daudé" <philmd@redhat.com>,
"Yoshinori Sato" <ysato@users.sourceforge.jp>,
imammedo@redhat.com
Subject: [PATCH v25 21/22] BootLinuxConsoleTest: Test the RX-Virt machine
Date: Fri, 27 Sep 2019 15:23:01 +0900 [thread overview]
Message-ID: <20190927062302.110144-22-ysato@users.sourceforge.jp> (raw)
In-Reply-To: <20190927062302.110144-1-ysato@users.sourceforge.jp>
From: Philippe Mathieu-Daudé <philmd@redhat.com>
Add two tests for the rx-virt machine, based on the recommended test
setup from Yoshinori Sato:
https://lists.gnu.org/archive/html/qemu-devel/2019-05/msg03586.html
- U-Boot prompt
- Linux kernel with Sash shell
These are very quick tests:
$ avocado run -t arch:rx tests/acceptance/boot_linux_console.py
JOB ID : 84a6ef01c0b87975ecbfcb31a920afd735753ace
JOB LOG : /home/phil/avocado/job-results/job-2019-05-24T05.02-84a6ef0/job.log
(1/2) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_rx_uboot: PASS (0.11 s)
(2/2) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_rx_linux: PASS (0.45 s)
RESULTS : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
Tests can also be run with:
$ avocado --show=console run -t arch:rx tests/acceptance/boot_linux_console.py
console: U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty (Feb 05 2019 - 21:56:06 +0900)
console: Linux version 4.19.0+ (yo-satoh@yo-satoh-debian) (gcc version 9.0.0 20181105 (experimental) (GCC)) #137 Wed Feb 20 23:20:02 JST 2019
console: Built 1 zonelists, mobility grouping on. Total pages: 8128
...
console: SuperH (H)SCI(F) driver initialized
console: 88240.serial: ttySC0 at MMIO 0x88240 (irq = 215, base_baud = 0) is a sci
console: console [ttySC0] enabled
console: 88248.serial: ttySC1 at MMIO 0x88248 (irq = 219, base_baud = 0) is a sci
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
Based-on: 20190517045136.3509-1-richard.henderson@linaro.org
"RX architecture support"
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
tests/acceptance/boot_linux_console.py | 46 ++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py
index 8a9a314ab4..5e805a2ee1 100644
--- a/tests/acceptance/boot_linux_console.py
+++ b/tests/acceptance/boot_linux_console.py
@@ -378,3 +378,49 @@ class BootLinuxConsole(Test):
self.vm.launch()
console_pattern = 'Kernel command line: %s' % kernel_command_line
self.wait_for_console_pattern(console_pattern)
+
+ def test_rx_uboot(self):
+ """
+ :avocado: tags=arch:rx
+ :avocado: tags=machine:rx-virt
+ :avocado: tags=endian:little
+ """
+ uboot_url = ('https://acc.dl.osdn.jp/users/23/23888/u-boot.bin.gz')
+ uboot_hash = '9b78dbd43b40b2526848c0b1ce9de02c24f4dcdb'
+ uboot_path = self.fetch_asset(uboot_url, asset_hash=uboot_hash)
+ uboot_path = archive.uncompress(uboot_path, self.workdir)
+
+ self.vm.set_machine('rx-virt')
+ self.vm.set_console()
+ self.vm.add_args('-bios', uboot_path,
+ '-no-reboot')
+ self.vm.launch()
+ uboot_version = 'U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty'
+ self.wait_for_console_pattern(uboot_version)
+ gcc_version = 'rx-unknown-linux-gcc (GCC) 9.0.0 20181105 (experimental)'
+ # FIXME limit baudrate on chardev, else we type too fast
+ #self.exec_command_and_wait_for_pattern('version', gcc_version)
+
+ def test_rx_linux(self):
+ """
+ :avocado: tags=arch:rx
+ :avocado: tags=machine:rx-virt
+ :avocado: tags=endian:little
+ """
+ dtb_url = ('https://acc.dl.osdn.jp/users/23/23887/rx-qemu.dtb')
+ dtb_hash = '7b4e4e2c71905da44e86ce47adee2210b026ac18'
+ dtb_path = self.fetch_asset(dtb_url, asset_hash=dtb_hash)
+ kernel_url = ('http://acc.dl.osdn.jp/users/23/23845/zImage')
+ kernel_hash = '39a81067f8d72faad90866ddfefa19165d68fc99'
+ kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash)
+
+ self.vm.set_machine('rx-virt')
+ self.vm.set_console()
+ kernel_command_line = self.KERNEL_COMMON_COMMAND_LINE + 'earlycon'
+ self.vm.add_args('-kernel', kernel_path,
+ '-dtb', dtb_path,
+ '-no-reboot')
+ self.vm.launch()
+ self.wait_for_console_pattern('Sash command shell (version 1.1.1)')
+ self.exec_command_and_wait_for_pattern('printenv',
+ 'TERM=linux')
--
2.20.1
next prev parent reply other threads:[~2019-09-27 6:52 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-27 6:22 [PATCH v25 00/22] Add RX archtecture support Yoshinori Sato
2019-09-27 6:22 ` [PATCH v25 01/22] MAINTAINERS: Add RX Yoshinori Sato
2019-09-27 6:22 ` [PATCH v25 02/22] qemu/bitops.h: Add extract8 and extract16 Yoshinori Sato
2019-09-27 6:22 ` [PATCH v25 03/22] hw/registerfields.h: Add 8bit and 16bit register macros Yoshinori Sato
2019-09-27 6:22 ` [PATCH v25 04/22] target/rx: TCG translation Yoshinori Sato
2019-09-27 6:22 ` [PATCH v25 05/22] target/rx: TCG helper Yoshinori Sato
2019-09-27 6:22 ` [PATCH v25 06/22] target/rx: CPU definition Yoshinori Sato
2019-10-10 16:03 ` Philippe Mathieu-Daudé
2019-09-27 6:22 ` [PATCH v25 07/22] target/rx: RX disassembler Yoshinori Sato
2019-09-27 6:22 ` [PATCH v25 08/22] target/rx: Disassemble rx_index_addr into a string Yoshinori Sato
2019-09-27 6:22 ` [PATCH v25 09/22] target/rx: Replace operand with prt_ldmi in disassembler Yoshinori Sato
2019-09-27 6:22 ` [PATCH v25 10/22] target/rx: Use prt_ldmi for XCHG_mr disassembly Yoshinori Sato
2019-09-27 6:22 ` [PATCH v25 11/22] target/rx: Emit all disassembly in one prt() Yoshinori Sato
2019-09-27 6:22 ` [PATCH v25 12/22] target/rx: Collect all bytes during disassembly Yoshinori Sato
2019-09-27 6:22 ` [PATCH v25 13/22] target/rx: Dump bytes for each insn " Yoshinori Sato
2019-09-27 6:22 ` [PATCH v25 14/22] hw/intc: RX62N interrupt controller (ICUa) Yoshinori Sato
2019-09-27 6:22 ` [PATCH v25 15/22] hw/timer: RX62N internal timer modules Yoshinori Sato
2019-09-27 6:22 ` [PATCH v25 16/22] hw/char: RX62N serial communication interface (SCI) Yoshinori Sato
2019-09-27 6:22 ` [PATCH v25 17/22] hw/rx: RX Target hardware definition Yoshinori Sato
2019-10-10 16:05 ` Philippe Mathieu-Daudé
2019-09-27 6:22 ` [PATCH v25 18/22] hw/rx: Honor -accel qtest Yoshinori Sato
2019-09-27 6:22 ` [PATCH v25 19/22] hw/rx: Restrict the RX62N microcontroller to the RX62N CPU core Yoshinori Sato
2019-09-27 6:23 ` [PATCH v25 20/22] Add rx-softmmu Yoshinori Sato
2019-09-27 6:23 ` Yoshinori Sato [this message]
2019-10-10 16:06 ` [PATCH v25 21/22] BootLinuxConsoleTest: Test the RX-Virt machine Philippe Mathieu-Daudé
2019-09-27 6:23 ` [PATCH v25 22/22] qapi/machine.json: Add RX cpu Yoshinori Sato
2019-10-10 16:09 ` Philippe Mathieu-Daudé
2019-09-27 21:39 ` [PATCH v25 00/22] Add RX archtecture support no-reply
2019-09-28 18:04 ` no-reply
2019-09-28 18:47 ` no-reply
2019-10-10 16:12 ` Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190927062302.110144-22-ysato@users.sourceforge.jp \
--to=ysato@users.sourceforge.jp \
--cc=imammedo@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).