qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Igor Mammedov <imammedo@redhat.com>
To: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: peter.maydell@linaro.org, shannon.zhaosl@gmail.com,
	qemu-devel@nongnu.org, xuwei5@hisilicon.com, linuxarm@huawei.com,
	eric.auger@redhat.com, qemu-arm@nongnu.org, lersek@redhat.com
Subject: Re: [PATCH 5/5] hw/arm/virt: Add nvdimm hotplug support
Date: Tue, 12 Nov 2019 14:01:45 +0100	[thread overview]
Message-ID: <20191112140145.7ad2f034@redhat.com> (raw)
In-Reply-To: <20191004155302.4632-6-shameerali.kolothum.thodi@huawei.com>

On Fri, 4 Oct 2019 16:53:02 +0100
Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> wrote:

> This adds support for nvdimm hotplug events through GED
> and enables nvdimm for the arm/virt. Now Guests with DT boot
> can have nvdimm cold plug and with ACPI both cold/hot plug.
> 
> Hot removal functionality is not yet supported.
> 
> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>

I'd move out DT cold-plug out of this patch is it's not related
to this patch at all

otherwise patch looks good, so 
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

> ---
>  docs/specs/acpi_hw_reduced_hotplug.rst |  1 +
>  hw/acpi/generic_event_device.c         | 13 +++++++++++++
>  hw/arm/virt.c                          | 20 +++++++++++++++-----
>  include/hw/acpi/generic_event_device.h |  1 +
>  4 files changed, 30 insertions(+), 5 deletions(-)
> 
> diff --git a/docs/specs/acpi_hw_reduced_hotplug.rst b/docs/specs/acpi_hw_reduced_hotplug.rst
> index 911a98255b..e3abe975bf 100644
> --- a/docs/specs/acpi_hw_reduced_hotplug.rst
> +++ b/docs/specs/acpi_hw_reduced_hotplug.rst
> @@ -63,6 +63,7 @@ GED IO interface (4 byte access)
>      bits:
>         0: Memory hotplug event
>         1: System power down event
> +       2: NVDIMM hotplug event
>      2-31: Reserved
>  
>  **write_access:**
> diff --git a/hw/acpi/generic_event_device.c b/hw/acpi/generic_event_device.c
> index 9cee90cc70..ad1b684304 100644
> --- a/hw/acpi/generic_event_device.c
> +++ b/hw/acpi/generic_event_device.c
> @@ -16,6 +16,7 @@
>  #include "hw/acpi/generic_event_device.h"
>  #include "hw/irq.h"
>  #include "hw/mem/pc-dimm.h"
> +#include "hw/mem/nvdimm.h"
>  #include "hw/qdev-properties.h"
>  #include "migration/vmstate.h"
>  #include "qemu/error-report.h"
> @@ -23,6 +24,7 @@
>  static const uint32_t ged_supported_events[] = {
>      ACPI_GED_MEM_HOTPLUG_EVT,
>      ACPI_GED_PWR_DOWN_EVT,
> +    ACPI_GED_NVDIMM_HOTPLUG_EVT,
>  };
>  
>  /*
> @@ -110,6 +112,11 @@ void build_ged_aml(Aml *table, const char *name, HotplugHandler *hotplug_dev,
>                             aml_notify(aml_name(ACPI_POWER_BUTTON_DEVICE),
>                                        aml_int(0x80)));
>                  break;
> +            case ACPI_GED_NVDIMM_HOTPLUG_EVT:
> +                aml_append(if_ctx,
> +                           aml_notify(aml_name("\\_SB.NVDR"),
> +                                      aml_int(0x80)));
> +                break;
>              default:
>                  /*
>                   * Please make sure all the events in ged_supported_events[]
> @@ -175,7 +182,11 @@ static void acpi_ged_device_plug_cb(HotplugHandler *hotplug_dev,
>      AcpiGedState *s = ACPI_GED(hotplug_dev);
>  
>      if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
> +        if (object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM)) {
> +            nvdimm_acpi_plug_cb(hotplug_dev, dev);
> +        } else {
>              acpi_memory_plug_cb(hotplug_dev, &s->memhp_state, dev, errp);
> +        }
>      } else {
>          error_setg(errp, "virt: device plug request for unsupported device"
>                     " type: %s", object_get_typename(OBJECT(dev)));
> @@ -192,6 +203,8 @@ static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev)
>          sel = ACPI_GED_MEM_HOTPLUG_EVT;
>      } else if (ev & ACPI_POWER_DOWN_STATUS) {
>          sel = ACPI_GED_PWR_DOWN_EVT;
> +    } else if (ev & ACPI_NVDIMM_HOTPLUG_STATUS) {
> +        sel = ACPI_GED_NVDIMM_HOTPLUG_EVT;
>      } else {
>          /* Unknown event. Return without generating interrupt. */
>          warn_report("GED: Unsupported event %d. No irq injected", ev);
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index 30bc8a7803..acdcba9638 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -543,6 +543,10 @@ static inline DeviceState *create_acpi_ged(VirtMachineState *vms, qemu_irq *pic)
>          event |= ACPI_GED_MEM_HOTPLUG_EVT;
>      }
>  
> +    if (ms->nvdimms_state->is_enabled) {
> +        event |= ACPI_GED_NVDIMM_HOTPLUG_EVT;
> +    }
> +
>      dev = qdev_create(NULL, TYPE_ACPI_GED);
>      qdev_prop_set_uint32(dev, "ged-event", event);
>  
> @@ -1938,9 +1942,12 @@ static void virt_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
>      }
>  
>      if (!vms->acpi_dev) {
> -        error_setg(errp,
> -                   "memory hotplug is not enabled: missing acpi-ged device");
> -        return;
> +        /* Allow nvdimm DT or cold plug */
> +        if (!(is_nvdimm && !dev->hotplugged)) {
> +            error_setg(errp,
> +                       "memory hotplug is not enabled: missing acpi-ged device");
> +            return;
> +         }



>      }
>  
>      pc_dimm_pre_plug(PC_DIMM(dev), MACHINE(hotplug_dev), NULL, errp);
> @@ -1964,8 +1971,10 @@ static void virt_memory_plug(HotplugHandler *hotplug_dev,
>          nvdimm_plug(ms->nvdimms_state);
>      }
>  
> -    hhc = HOTPLUG_HANDLER_GET_CLASS(vms->acpi_dev);
> -    hhc->plug(HOTPLUG_HANDLER(vms->acpi_dev), dev, &error_abort);
> +    if (vms->acpi_dev) {
> +        hhc = HOTPLUG_HANDLER_GET_CLASS(vms->acpi_dev);
> +        hhc->plug(HOTPLUG_HANDLER(vms->acpi_dev), dev, &error_abort);
> +    }
>  out:
>      error_propagate(errp, local_err);
>  }
> @@ -2073,6 +2082,7 @@ static void virt_machine_class_init(ObjectClass *oc, void *data)
>      hc->plug = virt_machine_device_plug_cb;
>      hc->unplug_request = virt_machine_device_unplug_request_cb;
>      mc->numa_mem_supported = true;
> +    mc->nvdimm_supported = true;
>      mc->auto_enable_numa_with_memhp = true;
>  }
>  
> diff --git a/include/hw/acpi/generic_event_device.h b/include/hw/acpi/generic_event_device.h
> index d157eac088..9eb86ca4fd 100644
> --- a/include/hw/acpi/generic_event_device.h
> +++ b/include/hw/acpi/generic_event_device.h
> @@ -82,6 +82,7 @@
>   */
>  #define ACPI_GED_MEM_HOTPLUG_EVT   0x1
>  #define ACPI_GED_PWR_DOWN_EVT      0x2
> +#define ACPI_GED_NVDIMM_HOTPLUG_EVT 0x4
>  
>  typedef struct GEDState {
>      MemoryRegion io;



  reply	other threads:[~2019-11-12 13:03 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-04 15:52 [PATCH 0/5] ARM virt: Add NVDIMM support Shameer Kolothum
2019-10-04 15:52 ` [PATCH 1/5] hw/arm: Align ACPI blob len to PAGE size Shameer Kolothum
2019-11-08 16:17   ` Igor Mammedov
2019-11-11 12:47     ` Shameerali Kolothum Thodi
2019-12-09 13:04       ` Shameerali Kolothum Thodi
2019-10-04 15:52 ` [PATCH 2/5] nvdimm: Use configurable ACPI IO base and size Shameer Kolothum
2019-11-11 14:24   ` Igor Mammedov
2019-10-04 15:53 ` [PATCH 3/5] hw/arm/virt: Add nvdimm hot-plug infrastructure Shameer Kolothum
2019-11-11 14:38   ` Igor Mammedov
2019-10-04 15:53 ` [PATCH 4/5] hw/arm/boot: Expose the pmem nodes in the DT Shameer Kolothum
2019-11-11 14:46   ` Igor Mammedov
2019-10-04 15:53 ` [PATCH 5/5] hw/arm/virt: Add nvdimm hotplug support Shameer Kolothum
2019-11-12 13:01   ` Igor Mammedov [this message]
2019-10-18 16:39 ` [PATCH 0/5] ARM virt: Add NVDIMM support Auger Eric
2019-10-22 14:05   ` Shameerali Kolothum Thodi
2019-11-25 13:20   ` Shameerali Kolothum Thodi
2019-11-25 15:45     ` Igor Mammedov
2019-11-25 16:25       ` Shameerali Kolothum Thodi
2019-11-26  8:56         ` Igor Mammedov
2019-11-26  9:46           ` Andrew Jones
2019-11-28 12:36           ` Shameerali Kolothum Thodi
2019-12-09 17:39           ` Shameerali Kolothum Thodi
2019-12-11  7:57             ` Igor Mammedov
2019-12-13 12:52               ` Shameerali Kolothum Thodi
2020-01-06 17:06               ` Shameerali Kolothum Thodi
2020-01-09 17:13                 ` Igor Mammedov
2020-01-13 13:11                   ` Shameerali Kolothum Thodi
2019-11-12 14:39 ` Igor Mammedov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191112140145.7ad2f034@redhat.com \
    --to=imammedo@redhat.com \
    --cc=eric.auger@redhat.com \
    --cc=lersek@redhat.com \
    --cc=linuxarm@huawei.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=shameerali.kolothum.thodi@huawei.com \
    --cc=shannon.zhaosl@gmail.com \
    --cc=xuwei5@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).