From: Klaus Birkelund <its@irrelevant.dk>
To: Beata Michalska <beata.michalska@linaro.org>
Cc: Kevin Wolf <kwolf@redhat.com>, Fam Zheng <fam@euphon.net>,
qemu-block@nongnu.org, qemu-devel@nongnu.org,
Max Reitz <mreitz@redhat.com>,
Paul Durrant <Paul.Durrant@citrix.com>,
Keith Busch <kbusch@kernel.org>
Subject: Re: [PATCH v2 12/20] nvme: bump supported specification version to 1.3
Date: Mon, 18 Nov 2019 10:48:56 +0100 [thread overview]
Message-ID: <20191118094856.GB812803@apples.localdomain> (raw)
In-Reply-To: <CADSWDzt-YfwuxmxL=c7qQzac-Xby1azxAsGhAfviSRXz2FkNhg@mail.gmail.com>
On Tue, Nov 12, 2019 at 03:05:06PM +0000, Beata Michalska wrote:
> Hi Klaus,
>
> On Tue, 15 Oct 2019 at 11:52, Klaus Jensen <its@irrelevant.dk> wrote:
> >
> > +static uint16_t nvme_identify_ns_descr_list(NvmeCtrl *n, NvmeCmd *c)
> > +{
> > + static const int len = 4096;
> > +
> > + struct ns_descr {
> > + uint8_t nidt;
> > + uint8_t nidl;
> > + uint8_t rsvd2[2];
> > + uint8_t nid[16];
> > + };
> > +
> > + uint32_t nsid = le32_to_cpu(c->nsid);
> > + uint64_t prp1 = le64_to_cpu(c->prp1);
> > + uint64_t prp2 = le64_to_cpu(c->prp2);
> > +
> > + struct ns_descr *list;
> > + uint16_t ret;
> > +
> > + trace_nvme_identify_ns_descr_list(nsid);
> > +
> > + if (unlikely(nsid == 0 || nsid > n->num_namespaces)) {
> > + trace_nvme_err_invalid_ns(nsid, n->num_namespaces);
> > + return NVME_INVALID_NSID | NVME_DNR;
> > + }
> > +
> In theory this should abort the command for inactive NSIDs as well.
> But I guess this will come later on.
>
At this point in the series, the device does not support multiple
namespaces anyway and num_namespaces is always 1. But this has also been
reported seperately in relation the patch adding multiple namespaces and
is fixed in v3.
> > + list = g_malloc0(len);
> > + list->nidt = 0x3;
> > + list->nidl = 0x10;
> > + *(uint32_t *) &list->nid[12] = cpu_to_be32(nsid);
> > +
> Might be worth to add some comment here -> as per the NGUID/EUI64 format.
> Also those are not specified currently in the namespace identity data structure.
>
I'll add a comment for why the Namespace UUID is set to this value here.
The NGUID/EUI64 fields are not set in the namespace identity data
structure as they are not required. See the descriptions of NGUID and
EUI64. Here for NGUID:
"The controller shall specify a globally unique namespace identifier
in this field, the EUI64 field, or a Namespace UUID in the Namespace
Identification Descriptor..."
Here, I chose to provide it in the Namespace Identification Descriptor
(by setting `list->nidt = 0x3`).
> > + ret = nvme_dma_read_prp(n, (uint8_t *) list, len, prp1, prp2);
> > + g_free(list);
> > + return ret;
> > +}
> > +
> > static uint16_t nvme_identify(NvmeCtrl *n, NvmeCmd *cmd)
> > {
> > NvmeIdentify *c = (NvmeIdentify *)cmd;
> > @@ -934,7 +978,9 @@ static uint16_t nvme_identify(NvmeCtrl *n, NvmeCmd *cmd)
> > case 0x01:
> > return nvme_identify_ctrl(n, c);
> > case 0x02:
> > - return nvme_identify_nslist(n, c);
> > + return nvme_identify_ns_list(n, c);
> > + case 0x03:
> > + return nvme_identify_ns_descr_list(n, cmd);
> > default:
> > trace_nvme_err_invalid_identify_cns(le32_to_cpu(c->cns));
> > return NVME_INVALID_FIELD | NVME_DNR;
> > @@ -1101,6 +1147,14 @@ static uint16_t nvme_set_feature(NvmeCtrl *n, NvmeCmd *cmd, NvmeRequest *req)
> > blk_set_enable_write_cache(n->conf.blk, dw11 & 1);
> > break;
> > case NVME_NUMBER_OF_QUEUES:
> > + if (n->qs_created > 2) {
> > + return NVME_CMD_SEQ_ERROR | NVME_DNR;
> > + }
> > +
> I am not sure this is entirely correct as the spec says:
> "if any I/O Submission and/or Completion Queues (...)"
> so it might be enough to have a single queue created
> for this command to be valid.
> Also I think that the condition here is to make sure that the number
> of queues requested is being set once at init phase. Currently this will
> allow the setting to happen if there is no active queue -> so at any
> point of time (provided the condition mentioned). I might be wrong here
> but it seems that what we need is a single status saying any queue
> has been created prior to the Set Feature command at all
>
Internally, the admin queue pair is counted in qs_created, which is the
reason for checking if is above 2. The admin queues are created when the
controller is enabled (mmio write to the EN register in CC).
I'll add a comment about that - I see why it is unclear.
>
> Small note: this patch seems to be introducing more changes
> than specified in the commit message and especially the subject. Might
> be worth to extend it a bit.
>
You are right. I'll split it up.
next prev parent reply other threads:[~2019-11-18 9:51 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-15 10:38 [PATCH v2 00/20] nvme: support NVMe v1.3d, SGLs and multiple namespaces Klaus Jensen
2019-10-15 10:38 ` [PATCH v2 01/20] nvme: remove superfluous breaks Klaus Jensen
2019-10-15 10:38 ` [PATCH v2 02/20] nvme: move device parameters to separate struct Klaus Jensen
2019-10-15 10:38 ` [PATCH v2 03/20] nvme: add missing fields in the identify controller data structure Klaus Jensen
2019-10-15 10:38 ` [PATCH v2 04/20] nvme: populate the mandatory subnqn and ver fields Klaus Jensen
2019-11-12 15:04 ` Beata Michalska
2019-11-13 6:16 ` Klaus Birkelund
2019-10-15 10:38 ` [PATCH v2 05/20] nvme: allow completion queues in the cmb Klaus Jensen
2019-10-15 10:38 ` [PATCH v2 06/20] nvme: add support for the abort command Klaus Jensen
2019-11-12 15:04 ` Beata Michalska
2019-11-13 6:12 ` Klaus Birkelund
2019-11-15 11:56 ` Beata Michalska
2019-11-18 8:49 ` Klaus Birkelund
2019-10-15 10:38 ` [PATCH v2 07/20] nvme: refactor device realization Klaus Jensen
2019-10-15 10:38 ` [PATCH v2 08/20] nvme: add support for the get log page command Klaus Jensen
2019-11-12 15:04 ` Beata Michalska
2019-11-19 20:01 ` Klaus Birkelund
2019-10-15 10:38 ` [PATCH v2 09/20] nvme: add support for the asynchronous event request command Klaus Jensen
2019-11-12 15:04 ` Beata Michalska
2019-11-19 19:51 ` Klaus Birkelund
2019-11-25 12:44 ` Beata Michalska
2019-10-15 10:38 ` [PATCH v2 10/20] nvme: add logging to error information log page Klaus Jensen
2019-10-15 10:38 ` [PATCH v2 11/20] nvme: add missing mandatory features Klaus Jensen
2019-10-15 10:38 ` [PATCH v2 12/20] nvme: bump supported specification version to 1.3 Klaus Jensen
2019-11-12 15:05 ` Beata Michalska
2019-11-18 9:48 ` Klaus Birkelund [this message]
2019-11-25 12:13 ` Beata Michalska
2019-11-26 8:40 ` Klaus Birkelund
2019-10-15 10:38 ` [PATCH v2 13/20] nvme: refactor prp mapping Klaus Jensen
2019-11-12 15:23 ` Beata Michalska
2019-11-20 9:39 ` Klaus Birkelund
2019-11-25 13:15 ` Beata Michalska
2019-10-15 10:38 ` [PATCH v2 14/20] nvme: allow multiple aios per command Klaus Jensen
2019-11-12 15:25 ` Beata Michalska
2019-11-21 11:57 ` Klaus Birkelund
2019-11-25 13:59 ` Beata Michalska
2019-10-15 10:38 ` [PATCH v2 15/20] nvme: add support for scatter gather lists Klaus Jensen
2019-11-12 15:25 ` Beata Michalska
2019-11-25 6:21 ` Klaus Birkelund
2019-11-25 14:10 ` Beata Michalska
2019-11-26 8:34 ` Klaus Birkelund
2019-10-15 10:38 ` [PATCH v2 16/20] nvme: support multiple namespaces Klaus Jensen
2019-10-15 10:38 ` [PATCH v2 17/20] nvme: bump controller pci device id Klaus Jensen
2019-10-15 10:38 ` [PATCH v2 18/20] nvme: remove redundant NvmeCmd pointer parameter Klaus Jensen
2019-10-15 10:38 ` [PATCH v2 19/20] nvme: make lba data size configurable Klaus Jensen
2019-11-12 15:24 ` Beata Michalska
2019-11-13 7:13 ` Klaus Birkelund
2019-10-15 10:39 ` [PATCH v2 20/20] nvme: handle dma errors Klaus Jensen
2019-10-15 17:19 ` [PATCH v2 00/20] nvme: support NVMe v1.3d, SGLs and multiple namespaces no-reply
2019-10-15 17:26 ` no-reply
2019-10-16 6:29 ` Fam Zheng
2019-10-28 6:09 ` Klaus Birkelund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191118094856.GB812803@apples.localdomain \
--to=its@irrelevant.dk \
--cc=Paul.Durrant@citrix.com \
--cc=beata.michalska@linaro.org \
--cc=fam@euphon.net \
--cc=kbusch@kernel.org \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).