qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: pbonzini@redhat.com, riku.voipio@iki.fi, laurent@vivier.eu,
	peter.maydell@linaro.org
Subject: [PATCH 3/3] linux-user/i386: Emulate x86_64 vsyscalls
Date: Tue, 14 Jan 2020 11:09:21 -1000	[thread overview]
Message-ID: <20200114210921.11216-4-richard.henderson@linaro.org> (raw)
In-Reply-To: <20200114210921.11216-1-richard.henderson@linaro.org>

Notice the magic page during translate, much like we already
do for the arm32 commpage.  At runtime, raise an exception to
return cpu_loop for emulation.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/i386/cpu.h          |   1 +
 linux-user/i386/cpu_loop.c | 104 +++++++++++++++++++++++++++++++++++++
 target/i386/translate.c    |  16 +++++-
 3 files changed, 120 insertions(+), 1 deletion(-)

diff --git a/target/i386/cpu.h b/target/i386/cpu.h
index 164d038d1f..3fb2d2a986 100644
--- a/target/i386/cpu.h
+++ b/target/i386/cpu.h
@@ -1000,6 +1000,7 @@ typedef uint64_t FeatureWordArray[FEATURE_WORDS];
 
 #define EXCP_VMEXIT     0x100 /* only for system emulation */
 #define EXCP_SYSCALL    0x101 /* only for user emulation */
+#define EXCP_VSYSCALL   0x102 /* only for user emulation */
 
 /* i386-specific interrupt pending bits.  */
 #define CPU_INTERRUPT_POLL      CPU_INTERRUPT_TGT_EXT_1
diff --git a/linux-user/i386/cpu_loop.c b/linux-user/i386/cpu_loop.c
index e217cca5ee..8b7c9f7337 100644
--- a/linux-user/i386/cpu_loop.c
+++ b/linux-user/i386/cpu_loop.c
@@ -92,6 +92,105 @@ static void gen_signal(CPUX86State *env, int sig, int code, abi_ptr addr)
     queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
 }
 
+#ifdef TARGET_X86_64
+static bool write_ok_or_segv(CPUX86State *env, abi_ptr addr, size_t len)
+{
+    /*
+     * For all the vsyscalls, NULL means "don't write anything" not
+     * "write it at address 0".
+     */
+    if (addr == 0 || access_ok(VERIFY_WRITE, addr, len)) {
+        return true;
+    }
+
+    gen_signal(env, TARGET_SIGSEGV, TARGET_SEGV_MAPERR, addr);
+    return false;
+}
+
+/*
+ * Since v3.1, the kernel traps and emulates the vsyscall page.
+ * Entry points other than the official generate SIGSEGV.
+ */
+static void emulate_vsyscall(CPUX86State *env)
+{
+    int syscall;
+    abi_ulong ret;
+    uint64_t caller;
+
+    /*
+     * Validate the entry point.  We have already validated the page
+     * during translation, now verify the offset.
+     */
+    switch (env->eip & ~TARGET_PAGE_MASK) {
+    case 0x000:
+        syscall = TARGET_NR_gettimeofday;
+        break;
+    case 0x400:
+        syscall = TARGET_NR_time;
+        break;
+    case 0x800:
+        syscall = TARGET_NR_getcpu;
+        break;
+    default:
+    sigsegv:
+        /* Like force_sig(SIGSEGV).  */
+        gen_signal(env, TARGET_SIGSEGV, TARGET_SI_KERNEL, 0);
+        return;
+    }
+
+    /*
+     * Validate the return address.
+     * Note that the kernel treats this the same as an invalid entry point.
+     */
+    if (get_user_u64(caller, env->regs[R_ESP])) {
+        goto sigsegv;
+    }
+
+    /*
+     * Validate the the pointer arguments.
+     */
+    switch (syscall) {
+    case TARGET_NR_gettimeofday:
+        if (!write_ok_or_segv(env, env->regs[R_EDI],
+                              sizeof(struct target_timeval)) ||
+            !write_ok_or_segv(env, env->regs[R_ESI],
+                              sizeof(struct target_timezone))) {
+            return;
+        }
+        break;
+    case TARGET_NR_time:
+        if (!write_ok_or_segv(env, env->regs[R_EDI], sizeof(abi_long))) {
+            return;
+        }
+        break;
+    case TARGET_NR_getcpu:
+        if (!write_ok_or_segv(env, env->regs[R_EDI], sizeof(uint32_t)) ||
+            !write_ok_or_segv(env, env->regs[R_ESI], sizeof(uint32_t))) {
+            return;
+        }
+        break;
+    default:
+        g_assert_not_reached();
+    }
+
+    /*
+     * Perform the syscall.  None of the vsyscalls should need restarting,
+     * and all faults should have been caught above.
+     */
+    ret = do_syscall(env, syscall, env->regs[R_EDI], env->regs[R_ESI],
+                     env->regs[R_EDX], env->regs[10], env->regs[8],
+                     env->regs[9], 0, 0);
+    g_assert(ret != -TARGET_ERESTARTSYS);
+    g_assert(ret != -TARGET_QEMU_ESIGRETURN);
+    g_assert(ret != -TARGET_EFAULT);
+    env->regs[R_EAX] = ret;
+
+    /* Emulate a ret instruction to leave the vsyscall page.  */
+    env->eip = caller;
+    env->regs[R_ESP] += 8;
+}
+#endif
+
 void cpu_loop(CPUX86State *env)
 {
     CPUState *cs = env_cpu(env);
@@ -141,6 +240,11 @@ void cpu_loop(CPUX86State *env)
                 env->regs[R_EAX] = ret;
             }
             break;
+#endif
+#ifdef TARGET_X86_64
+        case EXCP_VSYSCALL:
+            emulate_vsyscall(env);
+            break;
 #endif
         case EXCP0B_NOSEG:
         case EXCP0C_STACK:
diff --git a/target/i386/translate.c b/target/i386/translate.c
index 7c99ef1385..391b4ef149 100644
--- a/target/i386/translate.c
+++ b/target/i386/translate.c
@@ -8555,7 +8555,21 @@ static bool i386_tr_breakpoint_check(DisasContextBase *dcbase, CPUState *cpu,
 static void i386_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu)
 {
     DisasContext *dc = container_of(dcbase, DisasContext, base);
-    target_ulong pc_next = disas_insn(dc, cpu);
+    target_ulong pc_next;
+
+#if defined(TARGET_X86_64) && \
+    defined(CONFIG_USER_ONLY) && \
+    defined(CONFIG_LINUX)
+    /*
+     * Detect entry into the vsyscall page and invoke the syscall.
+     */
+    if ((dc->base.pc_next & TARGET_PAGE_MASK) == 0xffffffffff600000ull) {
+        gen_exception(dc, EXCP_VSYSCALL, dc->base.pc_next);
+        return;
+    }
+#endif
+
+    pc_next = disas_insn(dc, cpu);
 
     if (dc->tf || (dc->base.tb->flags & HF_INHIBIT_IRQ_MASK)) {
         /* if single step mode, we generate only one instruction and
-- 
2.20.1



  parent reply	other threads:[~2020-01-14 21:14 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-14 21:09 [PATCH 0/3] linux-user: Implement x86_64 vsyscalls Richard Henderson
2020-01-14 21:09 ` [PATCH 1/3] target/i386: Renumber EXCP_SYSCALL Richard Henderson
2020-01-15  7:22   ` Philippe Mathieu-Daudé
2020-01-15  9:55   ` Alex Bennée
2020-01-14 21:09 ` [PATCH 2/3] linux-user/i386: Split out gen_signal Richard Henderson
2020-01-15  7:22   ` Philippe Mathieu-Daudé
2020-01-15  9:58   ` Alex Bennée
2020-01-14 21:09 ` Richard Henderson [this message]
2020-01-16 10:51   ` [PATCH 3/3] linux-user/i386: Emulate x86_64 vsyscalls Alex Bennée
2020-01-16 16:26   ` Alex Bennée
2020-01-16 18:19     ` Richard Henderson
2020-01-16 18:22       ` Richard Henderson
2020-01-16 20:15       ` Alex Bennée
2020-01-14 23:35 ` [PATCH 0/3] linux-user: Implement " Paolo Bonzini
2020-01-15  7:01 ` Laurent Desnogues
2020-01-15 10:14 ` Laurent Vivier
2020-01-15 17:28   ` Richard Henderson
2020-01-16 14:05 ` Alex Bennée
2020-01-16 19:37   ` Richard Henderson
2020-01-16 14:30 ` Alex Bennée
2020-01-16 18:31   ` Richard Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200114210921.11216-4-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=laurent@vivier.eu \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=riku.voipio@iki.fi \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).