qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 09/45] target/arm: Swap argument order for VSHL during decode
Date: Thu, 14 May 2020 15:21:02 +0100	[thread overview]
Message-ID: <20200514142138.20875-10-peter.maydell@linaro.org> (raw)
In-Reply-To: <20200514142138.20875-1-peter.maydell@linaro.org>

From: Richard Henderson <richard.henderson@linaro.org>

Rather than perform the argument swap during code generation,
perform it during decode.  This means it doesn't have to be
special cased later, and we can share code with aarch64 code
generation.  Hopefully the decode comment addresses any confusion
that might arise in between.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/neon-dp.decode       | 17 +++++++++++++++--
 target/arm/translate-neon.inc.c |  3 +--
 2 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode
index ec3a92fe753..593f7fff03d 100644
--- a/target/arm/neon-dp.decode
+++ b/target/arm/neon-dp.decode
@@ -65,8 +65,21 @@ VCGT_U_3s        1111 001 1 0 . .. .... .... 0011 . . . 0 .... @3same
 VCGE_S_3s        1111 001 0 0 . .. .... .... 0011 . . . 1 .... @3same
 VCGE_U_3s        1111 001 1 0 . .. .... .... 0011 . . . 1 .... @3same
 
-VSHL_S_3s        1111 001 0 0 . .. .... .... 0100 . . . 0 .... @3same
-VSHL_U_3s        1111 001 1 0 . .. .... .... 0100 . . . 0 .... @3same
+# The _rev suffix indicates that Vn and Vm are reversed. This is
+# the case for shifts. In the Arm ARM these insns are documented
+# with the Vm and Vn fields in their usual places, but in the
+# assembly the operands are listed "backwards", ie in the order
+# Dd, Dm, Dn where other insns use Dd, Dn, Dm. For QEMU we choose
+# to consider Vm and Vn as being in different fields in the insn,
+# which allows us to avoid special-casing shifts in the trans_
+# function code. We would otherwise need to manually swap the operands
+# over to call Neon helper functions that are shared with AArch64,
+# which does not have this odd reversed-operand situation.
+@3same_rev       .... ... . . . size:2 .... .... .... . q:1 . . .... \
+                 &3same vn=%vm_dp vm=%vn_dp vd=%vd_dp
+
+VSHL_S_3s        1111 001 0 0 . .. .... .... 0100 . . . 0 .... @3same_rev
+VSHL_U_3s        1111 001 1 0 . .. .... .... 0100 . . . 0 .... @3same_rev
 
 VMAX_S_3s        1111 001 0 0 . .. .... .... 0110 . . . 0 .... @3same
 VMAX_U_3s        1111 001 1 0 . .. .... .... 0110 . . . 0 .... @3same
diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c
index aefeff498a6..416302bcc78 100644
--- a/target/arm/translate-neon.inc.c
+++ b/target/arm/translate-neon.inc.c
@@ -692,8 +692,7 @@ static bool trans_VMUL_p_3s(DisasContext *s, arg_3same *a)
                                 uint32_t rn_ofs, uint32_t rm_ofs,       \
                                 uint32_t oprsz, uint32_t maxsz)         \
     {                                                                   \
-        /* Note the operation is vshl vd,vm,vn */                       \
-        tcg_gen_gvec_3(rd_ofs, rm_ofs, rn_ofs,                          \
+        tcg_gen_gvec_3(rd_ofs, rn_ofs, rm_ofs,                          \
                        oprsz, maxsz, &OPARRAY[vece]);                   \
     }                                                                   \
     DO_3SAME(INSN, gen_##INSN##_3s)
-- 
2.20.1



  parent reply	other threads:[~2020-05-14 14:24 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-14 14:20 [PULL 00/45] target-arm queue Peter Maydell
2020-05-14 14:20 ` [PULL 01/45] target/arm: Use correct GDB XML for M-profile cores Peter Maydell
2020-05-14 14:20 ` [PULL 02/45] target/arm: Create gen_gvec_[us]sra Peter Maydell
2020-05-14 14:20 ` [PULL 03/45] target/arm: Create gen_gvec_{u,s}{rshr,rsra} Peter Maydell
2020-05-14 14:20 ` [PULL 04/45] target/arm: Create gen_gvec_{sri,sli} Peter Maydell
2020-05-14 14:20 ` [PULL 05/45] target/arm: Remove unnecessary range check for VSHL Peter Maydell
2020-05-14 14:20 ` [PULL 06/45] target/arm: Tidy handle_vec_simd_shri Peter Maydell
2020-05-14 14:21 ` [PULL 07/45] target/arm: Create gen_gvec_{ceq,clt,cle,cgt,cge}0 Peter Maydell
2020-05-14 14:21 ` [PULL 08/45] target/arm: Create gen_gvec_{mla,mls} Peter Maydell
2020-05-14 14:21 ` Peter Maydell [this message]
2020-05-14 14:21 ` [PULL 10/45] target/arm: Create gen_gvec_{cmtst,ushl,sshl} Peter Maydell
2020-05-14 14:21 ` [PULL 11/45] target/arm: Create gen_gvec_{uqadd, sqadd, uqsub, sqsub} Peter Maydell
2020-05-14 14:21 ` [PULL 12/45] target/arm: Remove fp_status from helper_{recpe, rsqrte}_u32 Peter Maydell
2020-05-14 14:21 ` [PULL 13/45] target/arm: Create gen_gvec_{qrdmla,qrdmls} Peter Maydell
2020-05-14 14:21 ` [PULL 14/45] target/arm: Pass pointer to qc to qrdmla/qrdmls Peter Maydell
2020-05-14 14:21 ` [PULL 15/45] target/arm: Clear tail in gvec_fmul_idx_*, gvec_fmla_idx_* Peter Maydell
2020-05-14 14:21 ` [PULL 16/45] target/arm: Vectorize SABD/UABD Peter Maydell
2020-05-14 14:21 ` [PULL 17/45] target/arm: Vectorize SABA/UABA Peter Maydell
2020-05-21 13:11   ` Peter Maydell
2020-05-14 14:21 ` [PULL 18/45] aspeed: Add support for the sonorapass-bmc board Peter Maydell
2020-05-14 14:21 ` [PULL 19/45] acpi: nvdimm: change NVDIMM_UUID_LE to a common macro Peter Maydell
2020-05-14 14:21 ` [PULL 20/45] hw/arm/virt: Introduce a RAS machine option Peter Maydell
2020-05-14 14:21 ` [PULL 21/45] docs: APEI GHES generation and CPER record description Peter Maydell
2020-05-14 14:21 ` [PULL 22/45] ACPI: Build related register address fields via hardware error fw_cfg blob Peter Maydell
2020-05-14 14:21 ` [PULL 23/45] ACPI: Build Hardware Error Source Table Peter Maydell
2020-05-14 14:21 ` [PULL 24/45] ACPI: Record the Generic Error Status Block address Peter Maydell
2020-05-14 14:21 ` [PULL 25/45] KVM: Move hwpoison page related functions into kvm-all.c Peter Maydell
2020-05-14 14:21 ` [PULL 26/45] ACPI: Record Generic Error Status Block(GESB) table Peter Maydell
2020-05-21 13:03   ` Peter Maydell
2020-05-21 15:31     ` Michael S. Tsirkin
2020-06-19 17:21       ` Peter Maydell
2020-06-20  1:50         ` Dongjiu Geng
2020-05-14 14:21 ` [PULL 27/45] target-arm: kvm64: handle SIGBUS signal from kernel or KVM Peter Maydell
2020-05-14 14:21 ` [PULL 28/45] MAINTAINERS: Add ACPI/HEST/GHES entries Peter Maydell
2020-05-14 14:21 ` [PULL 29/45] target/arm: Convert Neon 3-reg-same VQRDMLAH/VQRDMLSH to decodetree Peter Maydell
2020-05-14 14:21 ` [PULL 30/45] target/arm: Convert Neon 3-reg-same SHA " Peter Maydell
2020-05-14 14:21 ` [PULL 31/45] target/arm: Convert Neon 64-bit element 3-reg-same insns Peter Maydell
2020-05-14 14:21 ` [PULL 32/45] target/arm: Convert Neon VHADD " Peter Maydell
2020-05-14 14:21 ` [PULL 33/45] target/arm: Convert Neon VABA/VABD 3-reg-same to decodetree Peter Maydell
2020-05-14 14:21 ` [PULL 34/45] target/arm: Convert Neon VRHADD, VHSUB 3-reg-same insns " Peter Maydell
2020-05-14 14:21 ` [PULL 35/45] target/arm: Convert Neon VQSHL, VRSHL, VQRSHL " Peter Maydell
2020-05-14 14:21 ` [PULL 36/45] target/arm: Convert Neon VPMAX/VPMIN " Peter Maydell
2020-05-14 14:21 ` [PULL 37/45] target/arm: Convert Neon VPADD " Peter Maydell
2020-05-14 14:21 ` [PULL 38/45] target/arm: Convert Neon VQDMULH/VQRDMULH 3-reg-same " Peter Maydell
2020-05-14 14:21 ` [PULL 39/45] target/arm: Convert Neon VADD, VSUB, VABD 3-reg-same insns " Peter Maydell
2020-05-14 14:21 ` [PULL 40/45] target/arm: Convert Neon VPMIN/VPMAX/VPADD float " Peter Maydell
2020-05-14 14:21 ` [PULL 41/45] target/arm: Convert Neon fp VMUL, VMLA, VMLS " Peter Maydell
2020-05-14 14:21 ` [PULL 42/45] target/arm: Convert Neon 3-reg-same compare " Peter Maydell
2020-05-14 14:21 ` [PULL 43/45] target/arm: Move 'env' argument of recps_f32 and rsqrts_f32 helpers to usual place Peter Maydell
2020-05-14 14:21 ` [PULL 44/45] target/arm: Convert Neon fp VMAX/VMIN/VMAXNM/VMINNM/VRECPS/VRSQRTS to decodetree Peter Maydell
2020-05-14 14:21 ` [PULL 45/45] target/arm: Convert NEON VFMA, VFMS 3-reg-same insns " Peter Maydell
2020-05-14 16:42 ` [PULL 00/45] target-arm queue Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200514142138.20875-10-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).