qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
To: peter.maydell@linaro.org, qemu-devel@nongnu.org,
	qemu-ppc@nongnu.org, david@gibson.dropbear.id.au,
	atar4qemu@gmail.com
Subject: [PULL 12/13] mac_oldworld: Drop some variables
Date: Sun, 18 Oct 2020 16:59:18 +0100	[thread overview]
Message-ID: <20201018155919.21200-13-mark.cave-ayland@ilande.co.uk> (raw)
In-Reply-To: <20201018155919.21200-1-mark.cave-ayland@ilande.co.uk>

From: BALATON Zoltan <balaton@eik.bme.hu>

Values not used frequently enough may not worth putting in a local
variable, especially with names almost as long as the original value
because that does not improve readability, to the contrary it makes it
harder to see what value is used. Drop a few such variables.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <d67bc8d914a366ca6822b5190c1308d31af5c9b3.1602805637.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
 hw/ppc/mac_oldworld.c | 35 +++++++++++++++++------------------
 1 file changed, 17 insertions(+), 18 deletions(-)

diff --git a/hw/ppc/mac_oldworld.c b/hw/ppc/mac_oldworld.c
index 1abf26b5b4..e34680f980 100644
--- a/hw/ppc/mac_oldworld.c
+++ b/hw/ppc/mac_oldworld.c
@@ -83,14 +83,11 @@ static void ppc_heathrow_reset(void *opaque)
 static void ppc_heathrow_init(MachineState *machine)
 {
     ram_addr_t ram_size = machine->ram_size;
-    const char *kernel_filename = machine->kernel_filename;
-    const char *kernel_cmdline = machine->kernel_cmdline;
-    const char *initrd_filename = machine->initrd_filename;
     const char *boot_device = machine->boot_order;
     PowerPCCPU *cpu = NULL;
     CPUPPCState *env = NULL;
     char *filename;
-    int linux_boot, i;
+    int i;
     MemoryRegion *bios = g_new(MemoryRegion, 1);
     uint32_t kernel_base, initrd_base, cmdline_base = 0;
     int32_t kernel_size, initrd_size;
@@ -109,8 +106,6 @@ static void ppc_heathrow_init(MachineState *machine)
     void *fw_cfg;
     uint64_t tbfreq;
 
-    linux_boot = (kernel_filename != NULL);
-
     /* init CPUs */
     for (i = 0; i < smp_cpus; i++) {
         cpu = POWERPC_CPU(cpu_create(machine->cpu_type));
@@ -147,7 +142,7 @@ static void ppc_heathrow_init(MachineState *machine)
         bios_addr = (uint32_t)bios_addr;
 
         if (bios_size <= 0) {
-            /* or load binary ROM image */
+            /* or if could not load ELF try loading a binary ROM image */
             bios_size = load_image_targphys(filename, PROM_BASE, PROM_SIZE);
             bios_addr = PROM_BASE;
         }
@@ -160,7 +155,7 @@ static void ppc_heathrow_init(MachineState *machine)
         exit(1);
     }
 
-    if (linux_boot) {
+    if (machine->kernel_filename) {
         int bswap_needed;
 
 #ifdef BSWAP_NEEDED
@@ -169,29 +164,32 @@ static void ppc_heathrow_init(MachineState *machine)
         bswap_needed = 0;
 #endif
         kernel_base = KERNEL_LOAD_ADDR;
-        kernel_size = load_elf(kernel_filename, NULL,
+        kernel_size = load_elf(machine->kernel_filename, NULL,
                                translate_kernel_address, NULL, NULL, NULL,
                                NULL, NULL, 1, PPC_ELF_MACHINE, 0, 0);
         if (kernel_size < 0)
-            kernel_size = load_aout(kernel_filename, kernel_base,
+            kernel_size = load_aout(machine->kernel_filename, kernel_base,
                                     ram_size - kernel_base, bswap_needed,
                                     TARGET_PAGE_SIZE);
         if (kernel_size < 0)
-            kernel_size = load_image_targphys(kernel_filename,
+            kernel_size = load_image_targphys(machine->kernel_filename,
                                               kernel_base,
                                               ram_size - kernel_base);
         if (kernel_size < 0) {
-            error_report("could not load kernel '%s'", kernel_filename);
+            error_report("could not load kernel '%s'",
+                         machine->kernel_filename);
             exit(1);
         }
         /* load initrd */
-        if (initrd_filename) {
-            initrd_base = TARGET_PAGE_ALIGN(kernel_base + kernel_size + KERNEL_GAP);
-            initrd_size = load_image_targphys(initrd_filename, initrd_base,
+        if (machine->initrd_filename) {
+            initrd_base = TARGET_PAGE_ALIGN(kernel_base + kernel_size +
+                                            KERNEL_GAP);
+            initrd_size = load_image_targphys(machine->initrd_filename,
+                                              initrd_base,
                                               ram_size - initrd_base);
             if (initrd_size < 0) {
                 error_report("could not load initial ram disk '%s'",
-                             initrd_filename);
+                             machine->initrd_filename);
                 exit(1);
             }
             cmdline_base = TARGET_PAGE_ALIGN(initrd_base + initrd_size);
@@ -343,9 +341,10 @@ static void ppc_heathrow_init(MachineState *machine)
     fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, ARCH_HEATHROW);
     fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, kernel_base);
     fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
-    if (kernel_cmdline) {
+    if (machine->kernel_cmdline) {
         fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, cmdline_base);
-        pstrcpy_targphys("cmdline", cmdline_base, TARGET_PAGE_SIZE, kernel_cmdline);
+        pstrcpy_targphys("cmdline", cmdline_base, TARGET_PAGE_SIZE,
+                         machine->kernel_cmdline);
     } else {
         fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, 0);
     }
-- 
2.20.1



  parent reply	other threads:[~2020-10-18 16:16 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-18 15:59 [PULL 00/13] qemu-macppc queue 20201018 Mark Cave-Ayland
2020-10-18 15:59 ` [PULL 01/13] macio: don't reference serial_hd() directly within the device Mark Cave-Ayland
2020-10-18 15:59 ` [PULL 02/13] grackle: use qdev gpios for PCI IRQs Mark Cave-Ayland
2020-10-18 15:59 ` [PULL 03/13] uninorth: " Mark Cave-Ayland
2020-10-18 15:59 ` [PULL 04/13] m48t59-isa: remove legacy m48t59_init_isa() function Mark Cave-Ayland
2020-10-18 15:59 ` [PULL 05/13] sun4m: use qdev properties instead of legacy m48t59_init() function Mark Cave-Ayland
2020-10-18 15:59 ` [PULL 06/13] sun4u: " Mark Cave-Ayland
2020-10-18 15:59 ` [PULL 07/13] ppc405_boards: " Mark Cave-Ayland
2020-10-18 15:59 ` [PULL 08/13] m48t59: remove " Mark Cave-Ayland
2020-10-18 15:59 ` [PULL 09/13] mac_oldworld: Allow loading binary ROM image Mark Cave-Ayland
2020-10-18 15:59 ` [PULL 10/13] mac_newworld: " Mark Cave-Ayland
2020-10-18 15:59 ` [PULL 11/13] mac_oldworld: Drop a variable, use get_system_memory() directly Mark Cave-Ayland
2020-10-18 15:59 ` Mark Cave-Ayland [this message]
2020-10-18 15:59 ` [PULL 13/13] mac_oldworld: Change PCI address of macio to match real hardware Mark Cave-Ayland
2020-10-19  7:18 ` [PULL 00/13] qemu-macppc queue 20201018 Mark Cave-Ayland

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201018155919.21200-13-mark.cave-ayland@ilande.co.uk \
    --to=mark.cave-ayland@ilande.co.uk \
    --cc=atar4qemu@gmail.com \
    --cc=david@gibson.dropbear.id.au \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).