From: frank.chang@sifive.com
To: qemu-devel@nongnu.org, qemu-riscv@nongnu.org
Cc: Frank Chang <frank.chang@sifive.com>
Subject: [PATCH v6 00/17] support subsets of bitmanip extension
Date: Thu, 6 May 2021 00:06:01 +0800 [thread overview]
Message-ID: <20210505160620.15723-1-frank.chang@sifive.com> (raw)
From: Frank Chang <frank.chang@sifive.com>
This patchset implements RISC-V B-extension v0.93 version Zba, Zbb and
Zbs subset instructions. Some Zbp instructions are also implemented as
they have similar behavior with their Zba-, Zbb- and Zbs-family
instructions or for Zbb pseudo instructions (e.g. rev8, orc.b).
Specification:
https://github.com/riscv/riscv-bitmanip/blob/master/bitmanip-0.93.pdf
The port is available here:
https://github.com/sifive/qemu/tree/rvb-upstream-v6
To test rvb implementation, specify cpu argument with 'x-b=true' or
'x-b=true,bext_spec=v0.93'to enable B-extension support.
Changelog:
v6:
* rebase riscv-to-apply.next branch.
* remove all #ifdef TARGET_RISCV64 macros.
v5:
* add bext_spec cpu option, default set to v0.93.
* rebase master branch.
v4:
* Remove 'rd != 0' checks from immediate shift instructions.
v3:
* Convert existing immediate shift instructions to use gen_shifti()
and gen_shiftiw() interfaces.
* Rename *u.w instructions to *.uw.
* Rename sb* instructions to b*.
* Rename pcnt* instructions to cpop*.
v2:
* Add gen_shifti(), gen_shiftw(), gen_shiftiw() helper functions.
* Remove addwu, subwu and addiwu instructions as they are not longer
exist in latest draft.
* Optimize implementation with cleaner tcg ops.
Frank Chang (6):
target/riscv: rvb: count bits set
target/riscv: add gen_shifti() and gen_shiftiw() helper functions
target/riscv: rvb: single-bit instructions
target/riscv: rvb: generalized reverse
target/riscv: rvb: generalized or-combine
target/riscv: rvb: add b-ext version cpu option
Kito Cheng (11):
target/riscv: reformat @sh format encoding for B-extension
target/riscv: rvb: count leading/trailing zeros
target/riscv: rvb: logic-with-negate
target/riscv: rvb: pack two words into one register
target/riscv: rvb: min/max instructions
target/riscv: rvb: sign-extend instructions
target/riscv: rvb: shift ones
target/riscv: rvb: rotate (left/right)
target/riscv: rvb: address calculation
target/riscv: rvb: add/shift with prefix zero-extend
target/riscv: rvb: support and turn on B-extension from command line
target/riscv/bitmanip_helper.c | 90 +++++
target/riscv/cpu.c | 27 ++
target/riscv/cpu.h | 5 +
target/riscv/helper.h | 6 +
target/riscv/insn32.decode | 87 ++++-
target/riscv/insn_trans/trans_rvb.c.inc | 438 ++++++++++++++++++++++++
target/riscv/insn_trans/trans_rvi.c.inc | 54 +--
target/riscv/meson.build | 1 +
target/riscv/translate.c | 306 +++++++++++++++++
9 files changed, 958 insertions(+), 56 deletions(-)
create mode 100644 target/riscv/bitmanip_helper.c
create mode 100644 target/riscv/insn_trans/trans_rvb.c.inc
--
2.17.1
next reply other threads:[~2021-05-05 16:13 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-05 16:06 frank.chang [this message]
2021-05-05 16:06 ` [PATCH v6 01/17] target/riscv: reformat @sh format encoding for B-extension frank.chang
2021-05-05 16:06 ` [PATCH v6 02/17] target/riscv: rvb: count leading/trailing zeros frank.chang
2021-05-06 2:04 ` Alistair Francis
2021-05-05 16:06 ` [PATCH v6 03/17] target/riscv: rvb: count bits set frank.chang
2021-05-05 16:06 ` [PATCH v6 04/17] target/riscv: rvb: logic-with-negate frank.chang
2021-05-05 16:06 ` [PATCH v6 05/17] target/riscv: rvb: pack two words into one register frank.chang
2021-05-05 16:06 ` [PATCH v6 06/17] target/riscv: rvb: min/max instructions frank.chang
2021-05-05 16:06 ` [PATCH v6 07/17] target/riscv: rvb: sign-extend instructions frank.chang
2021-05-05 16:06 ` [PATCH v6 08/17] target/riscv: add gen_shifti() and gen_shiftiw() helper functions frank.chang
2021-05-10 7:23 ` Alistair Francis
2021-05-05 16:06 ` [PATCH v6 09/17] target/riscv: rvb: single-bit instructions frank.chang
2021-05-10 7:24 ` Alistair Francis
2021-05-05 16:06 ` [PATCH v6 10/17] target/riscv: rvb: shift ones frank.chang
2021-05-10 7:26 ` Alistair Francis
2021-05-05 16:06 ` [PATCH v6 11/17] target/riscv: rvb: rotate (left/right) frank.chang
2021-05-20 7:11 ` Alistair Francis
2021-05-05 16:06 ` [PATCH v6 12/17] target/riscv: rvb: generalized reverse frank.chang
2021-05-05 16:06 ` [PATCH v6 13/17] target/riscv: rvb: generalized or-combine frank.chang
2021-05-05 16:06 ` [PATCH v6 14/17] target/riscv: rvb: address calculation frank.chang
2021-05-05 16:06 ` [PATCH v6 15/17] target/riscv: rvb: add/shift with prefix zero-extend frank.chang
2021-05-05 16:06 ` [PATCH v6 16/17] target/riscv: rvb: support and turn on B-extension from command line frank.chang
2021-05-05 16:06 ` [PATCH v6 17/17] target/riscv: rvb: add b-ext version cpu option frank.chang
2021-05-27 22:05 ` Alistair Francis
2021-05-27 22:08 ` [PATCH v6 00/17] support subsets of bitmanip extension Alistair Francis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210505160620.15723-1-frank.chang@sifive.com \
--to=frank.chang@sifive.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).