From: BALATON Zoltan <balaton@eik.bme.hu>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Sebastian Bauer <mail@sebastianbauer.info>,
Magnus Damm <magnus.damm@gmail.com>,
Gerd Hoffmann <kraxel@redhat.com>,
Aurelien Jarno <aurelien@aurel32.net>
Subject: [PATCH v2 2/7] sm501: Shorten long variable names in sm501_2d_operation
Date: Thu, 21 May 2020 21:39:44 +0200 [thread overview]
Message-ID: <b9b67b94c46e945252a73c77dfd117132c63c4fb.1590089984.git.balaton@eik.bme.hu> (raw)
In-Reply-To: <cover.1590089984.git.balaton@eik.bme.hu>
This increases readability and cleans up some confusing naming.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
---
hw/display/sm501.c | 45 ++++++++++++++++++++++-----------------------
1 file changed, 22 insertions(+), 23 deletions(-)
diff --git a/hw/display/sm501.c b/hw/display/sm501.c
index bd3ccfe311..f42d05e1e4 100644
--- a/hw/display/sm501.c
+++ b/hw/display/sm501.c
@@ -700,17 +700,16 @@ static inline void hwc_invalidate(SM501State *s, int crt)
static void sm501_2d_operation(SM501State *s)
{
/* obtain operation parameters */
- int operation = (s->twoD_control >> 16) & 0x1f;
+ int cmd = (s->twoD_control >> 16) & 0x1F;
int rtl = s->twoD_control & 0x8000000;
int src_x = (s->twoD_source >> 16) & 0x01FFF;
int src_y = s->twoD_source & 0xFFFF;
int dst_x = (s->twoD_destination >> 16) & 0x01FFF;
int dst_y = s->twoD_destination & 0xFFFF;
- int operation_width = (s->twoD_dimension >> 16) & 0x1FFF;
- int operation_height = s->twoD_dimension & 0xFFFF;
+ int width = (s->twoD_dimension >> 16) & 0x1FFF;
+ int height = s->twoD_dimension & 0xFFFF;
uint32_t color = s->twoD_foreground;
- int format_flags = (s->twoD_stretch >> 20) & 0x3;
- int addressing = (s->twoD_stretch >> 16) & 0xF;
+ int format = (s->twoD_stretch >> 20) & 0x3;
int rop_mode = (s->twoD_control >> 15) & 0x1; /* 1 for rop2, else rop3 */
/* 1 if rop2 source is the pattern, otherwise the source is the bitmap */
int rop2_source_is_pattern = (s->twoD_control >> 14) & 0x1;
@@ -721,12 +720,12 @@ static void sm501_2d_operation(SM501State *s)
/* get frame buffer info */
uint8_t *src = s->local_mem + src_base;
uint8_t *dst = s->local_mem + dst_base;
- int src_width = s->twoD_pitch & 0x1FFF;
- int dst_width = (s->twoD_pitch >> 16) & 0x1FFF;
+ int src_pitch = s->twoD_pitch & 0x1FFF;
+ int dst_pitch = (s->twoD_pitch >> 16) & 0x1FFF;
int crt = (s->dc_crt_control & SM501_DC_CRT_CONTROL_SEL) ? 1 : 0;
int fb_len = get_width(s, crt) * get_height(s, crt) * get_bpp(s, crt);
- if (addressing != 0x0) {
+ if ((s->twoD_stretch >> 16) & 0xF) {
qemu_log_mask(LOG_UNIMP, "sm501: only XY addressing is supported.\n");
return;
}
@@ -758,20 +757,20 @@ static void sm501_2d_operation(SM501State *s)
return;
}
- switch (operation) {
+ switch (cmd) {
case 0x00: /* copy area */
#define COPY_AREA(_bpp, _pixel_type, rtl) { \
int y, x, index_d, index_s; \
- for (y = 0; y < operation_height; y++) { \
- for (x = 0; x < operation_width; x++) { \
+ for (y = 0; y < height; y++) { \
+ for (x = 0; x < width; x++) { \
_pixel_type val; \
\
if (rtl) { \
- index_s = ((src_y - y) * src_width + src_x - x) * _bpp; \
- index_d = ((dst_y - y) * dst_width + dst_x - x) * _bpp; \
+ index_s = ((src_y - y) * src_pitch + src_x - x) * _bpp; \
+ index_d = ((dst_y - y) * dst_pitch + dst_x - x) * _bpp; \
} else { \
- index_s = ((src_y + y) * src_width + src_x + x) * _bpp; \
- index_d = ((dst_y + y) * dst_width + dst_x + x) * _bpp; \
+ index_s = ((src_y + y) * src_pitch + src_x + x) * _bpp; \
+ index_d = ((dst_y + y) * dst_pitch + dst_x + x) * _bpp; \
} \
if (rop_mode == 1 && rop == 5) { \
/* Invert dest */ \
@@ -783,7 +782,7 @@ static void sm501_2d_operation(SM501State *s)
} \
} \
}
- switch (format_flags) {
+ switch (format) {
case 0:
COPY_AREA(1, uint8_t, rtl);
break;
@@ -799,15 +798,15 @@ static void sm501_2d_operation(SM501State *s)
case 0x01: /* fill rectangle */
#define FILL_RECT(_bpp, _pixel_type) { \
int y, x; \
- for (y = 0; y < operation_height; y++) { \
- for (x = 0; x < operation_width; x++) { \
- int index = ((dst_y + y) * dst_width + dst_x + x) * _bpp; \
+ for (y = 0; y < height; y++) { \
+ for (x = 0; x < width; x++) { \
+ int index = ((dst_y + y) * dst_pitch + dst_x + x) * _bpp; \
*(_pixel_type *)&dst[index] = (_pixel_type)color; \
} \
} \
}
- switch (format_flags) {
+ switch (format) {
case 0:
FILL_RECT(1, uint8_t);
break;
@@ -824,14 +823,14 @@ static void sm501_2d_operation(SM501State *s)
default:
qemu_log_mask(LOG_UNIMP, "sm501: not implemented 2D operation: %d\n",
- operation);
+ cmd);
return;
}
if (dst_base >= get_fb_addr(s, crt) &&
dst_base <= get_fb_addr(s, crt) + fb_len) {
- int dst_len = MIN(fb_len, ((dst_y + operation_height - 1) * dst_width +
- dst_x + operation_width) * (1 << format_flags));
+ int dst_len = MIN(fb_len, ((dst_y + height - 1) * dst_pitch +
+ dst_x + width) * (1 << format));
if (dst_len) {
memory_region_set_dirty(&s->local_mem_region, dst_base, dst_len);
}
--
2.21.3
next prev parent reply other threads:[~2020-05-21 19:54 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-21 19:39 [PATCH v2 0/7] Misc display/sm501 clean ups and fixes BALATON Zoltan
2020-05-21 19:39 ` [PATCH v2 4/7] sm501: Clean up local variables in sm501_2d_operation BALATON Zoltan
2020-05-21 19:39 ` [PATCH v2 6/7] sm501: Optimize small overlapping blits BALATON Zoltan
2020-05-21 19:39 ` [PATCH v2 1/7] sm501: Convert printf + abort to qemu_log_mask BALATON Zoltan
2020-05-21 19:39 ` BALATON Zoltan [this message]
2020-05-21 19:39 ` [PATCH v2 3/7] sm501: Use BIT(x) macro to shorten constant BALATON Zoltan
2020-05-21 19:39 ` [PATCH v2 7/7] sm501: Remove obsolete changelog and todo comment BALATON Zoltan
2020-05-21 19:39 ` [PATCH v2 5/7] sm501: Replace hand written implementation with pixman where possible BALATON Zoltan
2020-05-26 10:43 ` Gerd Hoffmann
2020-05-26 13:35 ` BALATON Zoltan
2020-05-27 9:15 ` Gerd Hoffmann
2020-05-27 11:05 ` BALATON Zoltan
2020-05-22 1:50 ` [PATCH v2 0/7] Misc display/sm501 clean ups and fixes no-reply
2020-05-28 7:21 ` Gerd Hoffmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b9b67b94c46e945252a73c77dfd117132c63c4fb.1590089984.git.balaton@eik.bme.hu \
--to=balaton@eik.bme.hu \
--cc=aurelien@aurel32.net \
--cc=kraxel@redhat.com \
--cc=magnus.damm@gmail.com \
--cc=mail@sebastianbauer.info \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).