From: Michal Simek <michal.simek@xilinx.com> To: linux-kernel@vger.kernel.org, monstr@monstr.eu, michal.simek@xilinx.com, git@xilinx.com Cc: Kalyani Akula <kalyani.akula@xilinx.com>, Krzysztof Kozlowski <krzk@kernel.org>, Laurent Pinchart <laurent.pinchart@ideasonboard.com>, Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 00/12] arm64: dts: zynqmp: DT updates to match latest drivers Date: Thu, 21 Jan 2021 11:26:48 +0100 [thread overview] Message-ID: <cover.1611224800.git.michal.simek@xilinx.com> (raw) Hi, I am sending this series to reflect the latest drivers which have been merged to mainline kernel. I have boot it on zcu102-rev1.0 and also zcu104-rev1.0. That's why I have also added DT for this newer revision. The series is based on https://github.com/Xilinx/linux-xlnx/tree/zynqmp/dt. And mio-bank patch requires update in dt-binding which has been posted here https://lore.kernel.org/r/5fa17dfe4b42abefd84b4cbb7b8bcd4d31398f40.1606914986.git.michal.simek@xilinx.com Thanks, Michal Changes in v2: - Remove reset description for IPs from this patch. IPs will be enabled separately with DT binding update. - Change patch subject Michal Simek (12): arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111 arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106 arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111 arm64: dts: zynqmp: Enable reset controller driver arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106 arm64: dts: zynqmp: Add label for zynqmp_ipi arm64: dts: zynqmp: Add missing mio-bank properties to sdhcis arm64: dts: zynqmp: Wire arasan nand controller arm64: dts: zynqmp: Wire zynqmp qspi controller arm64: dts: zynqmp: Add missing lpd watchdog node arm64: dts: zynqmp: Add missing iommu IDs arm64: dts: zynqmp: Add description for zcu104 revC arch/arm64/boot/dts/xilinx/Makefile | 1 + .../arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi | 12 + .../boot/dts/xilinx/zynqmp-zcu100-revC.dts | 2 + .../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 84 +++++- .../boot/dts/xilinx/zynqmp-zcu104-revA.dts | 29 ++ .../boot/dts/xilinx/zynqmp-zcu104-revC.dts | 282 ++++++++++++++++++ .../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 78 +++++ .../boot/dts/xilinx/zynqmp-zcu111-revA.dts | 59 +++- arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 94 +++++- 9 files changed, 637 insertions(+), 4 deletions(-) create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts -- 2.30.0
WARNING: multiple messages have this Message-ID (diff)
From: Michal Simek <michal.simek@xilinx.com> To: linux-kernel@vger.kernel.org, monstr@monstr.eu, michal.simek@xilinx.com, git@xilinx.com Cc: devicetree@vger.kernel.org, Krzysztof Kozlowski <krzk@kernel.org>, Rob Herring <robh+dt@kernel.org>, Laurent Pinchart <laurent.pinchart@ideasonboard.com>, Kalyani Akula <kalyani.akula@xilinx.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 00/12] arm64: dts: zynqmp: DT updates to match latest drivers Date: Thu, 21 Jan 2021 11:26:48 +0100 [thread overview] Message-ID: <cover.1611224800.git.michal.simek@xilinx.com> (raw) Hi, I am sending this series to reflect the latest drivers which have been merged to mainline kernel. I have boot it on zcu102-rev1.0 and also zcu104-rev1.0. That's why I have also added DT for this newer revision. The series is based on https://github.com/Xilinx/linux-xlnx/tree/zynqmp/dt. And mio-bank patch requires update in dt-binding which has been posted here https://lore.kernel.org/r/5fa17dfe4b42abefd84b4cbb7b8bcd4d31398f40.1606914986.git.michal.simek@xilinx.com Thanks, Michal Changes in v2: - Remove reset description for IPs from this patch. IPs will be enabled separately with DT binding update. - Change patch subject Michal Simek (12): arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111 arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106 arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111 arm64: dts: zynqmp: Enable reset controller driver arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106 arm64: dts: zynqmp: Add label for zynqmp_ipi arm64: dts: zynqmp: Add missing mio-bank properties to sdhcis arm64: dts: zynqmp: Wire arasan nand controller arm64: dts: zynqmp: Wire zynqmp qspi controller arm64: dts: zynqmp: Add missing lpd watchdog node arm64: dts: zynqmp: Add missing iommu IDs arm64: dts: zynqmp: Add description for zcu104 revC arch/arm64/boot/dts/xilinx/Makefile | 1 + .../arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi | 12 + .../boot/dts/xilinx/zynqmp-zcu100-revC.dts | 2 + .../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 84 +++++- .../boot/dts/xilinx/zynqmp-zcu104-revA.dts | 29 ++ .../boot/dts/xilinx/zynqmp-zcu104-revC.dts | 282 ++++++++++++++++++ .../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 78 +++++ .../boot/dts/xilinx/zynqmp-zcu111-revA.dts | 59 +++- arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 94 +++++- 9 files changed, 637 insertions(+), 4 deletions(-) create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts -- 2.30.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-01-21 13:19 UTC|newest] Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-01-21 10:26 Michal Simek [this message] 2021-01-21 10:26 ` [PATCH v2 00/12] arm64: dts: zynqmp: DT updates to match latest drivers Michal Simek 2021-01-21 10:26 ` [PATCH v2 01/12] arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111 Michal Simek 2021-01-21 10:26 ` Michal Simek 2021-01-21 10:26 ` [PATCH v2 02/12] arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106 Michal Simek 2021-01-21 10:26 ` Michal Simek 2021-01-21 10:26 ` [PATCH v2 03/12] arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111 Michal Simek 2021-01-21 10:26 ` Michal Simek 2021-01-21 10:26 ` [PATCH v2 04/12] arm64: dts: zynqmp: Enable reset controller driver Michal Simek 2021-01-21 10:26 ` Michal Simek 2021-01-21 22:38 ` Laurent Pinchart 2021-01-21 22:38 ` Laurent Pinchart 2021-01-21 10:26 ` [PATCH v2 05/12] arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106 Michal Simek 2021-01-21 10:26 ` Michal Simek 2021-01-21 10:26 ` [PATCH v2 06/12] arm64: dts: zynqmp: Add label for zynqmp_ipi Michal Simek 2021-01-21 10:26 ` Michal Simek 2021-01-21 10:26 ` [PATCH v2 07/12] arm64: dts: zynqmp: Add missing mio-bank properties to sdhcis Michal Simek 2021-01-21 10:26 ` Michal Simek 2021-01-21 10:26 ` [PATCH v2 08/12] arm64: dts: zynqmp: Wire arasan nand controller Michal Simek 2021-01-21 10:26 ` Michal Simek 2021-01-21 10:26 ` [PATCH v2 09/12] arm64: dts: zynqmp: Wire zynqmp qspi controller Michal Simek 2021-01-21 10:26 ` Michal Simek 2021-01-21 10:26 ` [PATCH v2 10/12] arm64: dts: zynqmp: Add missing lpd watchdog node Michal Simek 2021-01-21 10:26 ` Michal Simek 2021-01-21 10:26 ` [PATCH v2 11/12] arm64: dts: zynqmp: Add missing iommu IDs Michal Simek 2021-01-21 10:26 ` Michal Simek 2021-01-21 10:27 ` [PATCH v2 12/12] arm64: dts: zynqmp: Add description for zcu104 revC Michal Simek 2021-01-21 10:27 ` Michal Simek 2021-02-01 9:38 ` Michal Simek 2021-02-01 9:38 ` Michal Simek 2021-02-01 9:36 ` [PATCH v2 00/12] arm64: dts: zynqmp: DT updates to match latest drivers Michal Simek 2021-02-01 9:36 ` Michal Simek
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=cover.1611224800.git.michal.simek@xilinx.com \ --to=michal.simek@xilinx.com \ --cc=devicetree@vger.kernel.org \ --cc=git@xilinx.com \ --cc=kalyani.akula@xilinx.com \ --cc=krzk@kernel.org \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=monstr@monstr.eu \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.