selinux.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Burgener <dburgener@linux.microsoft.com>
To: selinux@vger.kernel.org
Cc: stephen.smalley.work@gmail.com, omosnace@redhat.com,
	paul@paul-moore.com, linux-fsdevel@vger.kernel.org,
	viro@zeniv.linux.org.uk
Subject: [PATCH v3 4/4] selinux: Create new booleans and class dirs out of tree
Date: Wed, 19 Aug 2020 15:59:35 -0400	[thread overview]
Message-ID: <20200819195935.1720168-5-dburgener@linux.microsoft.com> (raw)
In-Reply-To: <20200819195935.1720168-1-dburgener@linux.microsoft.com>

In order to avoid concurrency issues around selinuxfs resource availability
during policy load, we first create new directories out of tree for
reloaded resources, then swap them in, and finally delete the old versions.

This fix focuses on concurrency in each of the two subtrees swapped, and
not concurrency between the trees.  This means that it is still possible
that subsequent reads to eg the booleans directory and the class directory
during a policy load could see the old state for one and the new for the other.
The problem of ensuring that policy loads are fully atomic from the perspective
of userspace is larger than what is dealt with here.  This commit focuses on
ensuring that the directories contents always match either the new or the old
policy state from the perspective of userspace.

In the previous implementation, on policy load /sys/fs/selinux is updated
by deleting the previous contents of
/sys/fs/selinux/{class,booleans} and then recreating them.  This means
that there is a period of time when the contents of these directories do not
exist which can cause race conditions as userspace relies on them for
information about the policy.  In addition, it means that error recovery in
the event of failure is challenging.

In order to demonstrate the race condition that this series fixes, you
can use the following commands:

while true; do cat /sys/fs/selinux/class/service/perms/status
>/dev/null; done &
while true; do load_policy; done;

In the existing code, this will display errors fairly often as the class
lookup fails.  (In normal operation from systemd, this would result in a
permission check which would be allowed or denied based on policy settings
around unknown object classes.) After applying this patch series you
should expect to no longer see such error messages.

Signed-off-by: Daniel Burgener <dburgener@linux.microsoft.com>
---
 security/selinux/selinuxfs.c | 113 ++++++++++++++++++++++++++++-------
 1 file changed, 90 insertions(+), 23 deletions(-)

diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c
index 2a0e8b5f19d5..d1872adf0c47 100644
--- a/security/selinux/selinuxfs.c
+++ b/security/selinux/selinuxfs.c
@@ -20,6 +20,7 @@
 #include <linux/fs_context.h>
 #include <linux/mount.h>
 #include <linux/mutex.h>
+#include <linux/namei.h>
 #include <linux/init.h>
 #include <linux/string.h>
 #include <linux/security.h>
@@ -361,7 +362,11 @@ static int sel_make_classes(struct selinux_policy *newpolicy,
 static struct dentry *sel_make_dir(struct dentry *dir, const char *name,
 			unsigned long *ino);
 
-/* declaration for sel_remove_old_policy_nodes */
+/* declaration for sel_make_policy_nodes */
+static struct dentry *sel_make_disconnected_dir(struct super_block *sb,
+						unsigned long *ino);
+
+/* declaration for sel_make_policy_nodes */
 static void sel_remove_entries(struct dentry *de);
 
 static ssize_t sel_read_mls(struct file *filp, char __user *buf,
@@ -518,48 +523,94 @@ static const struct file_operations sel_policy_ops = {
 	.llseek		= generic_file_llseek,
 };
 
-static void sel_remove_old_policy_nodes(struct selinux_fs_info *fsi)
+static void sel_remove_old_bool_data(unsigned int bool_num, char **bool_names,
+				unsigned int *bool_values)
 {
 	u32 i;
 
 	/* bool_dir cleanup */
-	for (i = 0; i < fsi->bool_num; i++)
-		kfree(fsi->bool_pending_names[i]);
-	kfree(fsi->bool_pending_names);
-	kfree(fsi->bool_pending_values);
-	fsi->bool_num = 0;
-	fsi->bool_pending_names = NULL;
-	fsi->bool_pending_values = NULL;
-
-	sel_remove_entries(fsi->bool_dir);
-
-	/* class_dir cleanup */
-	sel_remove_entries(fsi->class_dir);
-
+	for (i = 0; i < bool_num; i++)
+		kfree(bool_names[i]);
+	kfree(bool_names);
+	kfree(bool_values);
 }
 
 static int sel_make_policy_nodes(struct selinux_fs_info *fsi,
 				struct selinux_policy *newpolicy)
 {
-	int ret;
+	int ret = 0;
+	struct dentry *tmp_parent, *tmp_bool_dir, *tmp_class_dir, *old_dentry;
+	unsigned int tmp_bool_num, old_bool_num;
+	char **tmp_bool_names, **old_bool_names;
+	unsigned int *tmp_bool_values, *old_bool_values;
+	unsigned long tmp_ino = fsi->last_ino; /* Don't increment last_ino in this function */
 
-	sel_remove_old_policy_nodes(fsi);
+	tmp_parent = sel_make_disconnected_dir(fsi->sb, &tmp_ino);
+	if (IS_ERR(tmp_parent))
+		return PTR_ERR(tmp_parent);
 
-	ret = sel_make_bools(newpolicy, fsi->bool_dir, &fsi->bool_num,
-			     &fsi->bool_pending_names, &fsi->bool_pending_values);
+	tmp_ino = fsi->bool_dir->d_inode->i_ino - 1; /* sel_make_dir will increment and set */
+	tmp_bool_dir = sel_make_dir(tmp_parent, BOOL_DIR_NAME, &tmp_ino);
+	if (IS_ERR(tmp_bool_dir)) {
+		ret = PTR_ERR(tmp_bool_dir);
+		goto out;
+	}
+
+	tmp_ino = fsi->class_dir->d_inode->i_ino - 1; /* sel_make_dir will increment and set */
+	tmp_class_dir = sel_make_dir(tmp_parent, CLASS_DIR_NAME, &tmp_ino);
+	if (IS_ERR(tmp_class_dir)) {
+		ret = PTR_ERR(tmp_class_dir);
+		goto out;
+	}
+
+	ret = sel_make_bools(newpolicy, tmp_bool_dir, &tmp_bool_num,
+			     &tmp_bool_names, &tmp_bool_values);
 	if (ret) {
 		pr_err("SELinux: failed to load policy booleans\n");
-		return ret;
+		goto out;
 	}
 
-	ret = sel_make_classes(newpolicy, fsi->class_dir,
+	ret = sel_make_classes(newpolicy, tmp_class_dir,
 			       &fsi->last_class_ino);
 	if (ret) {
 		pr_err("SELinux: failed to load policy classes\n");
-		return ret;
+		goto out;
 	}
 
-	return 0;
+	/* booleans */
+	old_dentry = fsi->bool_dir;
+	lock_rename(tmp_bool_dir, old_dentry);
+	d_exchange(tmp_bool_dir, fsi->bool_dir);
+
+	old_bool_num = fsi->bool_num;
+	old_bool_names = fsi->bool_pending_names;
+	old_bool_values = fsi->bool_pending_values;
+
+	fsi->bool_num = tmp_bool_num;
+	fsi->bool_pending_names = tmp_bool_names;
+	fsi->bool_pending_values = tmp_bool_values;
+
+	sel_remove_old_bool_data(old_bool_num, old_bool_names, old_bool_values);
+
+	fsi->bool_dir = tmp_bool_dir;
+	unlock_rename(tmp_bool_dir, old_dentry);
+
+	/* classes */
+	old_dentry = fsi->class_dir;
+	lock_rename(tmp_class_dir, old_dentry);
+	d_exchange(tmp_class_dir, fsi->class_dir);
+	fsi->class_dir = tmp_class_dir;
+	unlock_rename(tmp_class_dir, old_dentry);
+
+out:
+	/* Since the other temporary dirs are children of tmp_parent
+	 * this will handle all the cleanup in the case of a failure before
+	 * the swapover
+	 */
+	sel_remove_entries(tmp_parent);
+	dput(tmp_parent); /* d_genocide() only handles the children */
+
+	return ret;
 }
 
 static ssize_t sel_write_load(struct file *file, const char __user *buf,
@@ -1982,6 +2033,22 @@ static struct dentry *sel_make_dir(struct dentry *dir, const char *name,
 	return dentry;
 }
 
+static struct dentry *sel_make_disconnected_dir(struct super_block *sb,
+						unsigned long *ino)
+{
+	struct inode *inode = sel_make_inode(sb, S_IFDIR | S_IRUGO | S_IXUGO);
+
+	if (!inode)
+		return ERR_PTR(-ENOMEM);
+
+	inode->i_op = &simple_dir_inode_operations;
+	inode->i_fop = &simple_dir_operations;
+	inode->i_ino = ++(*ino);
+	/* directory inodes start off with i_nlink == 2 (for "." entry) */
+	inc_nlink(inode);
+	return d_obtain_alias(inode);
+}
+
 #define NULL_FILE_NAME "null"
 
 static int sel_fill_super(struct super_block *sb, struct fs_context *fc)
-- 
2.25.4


  parent reply	other threads:[~2020-08-19 19:59 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-19 19:59 [PATCH v3 0/4] Update SELinuxfs out of tree and then swapover Daniel Burgener
2020-08-19 19:59 ` [PATCH v3 1/4] selinux: Create function for selinuxfs directory cleanup Daniel Burgener
2020-08-20 14:53   ` Stephen Smalley
2020-08-21 13:43   ` Paul Moore
2020-08-19 19:59 ` [PATCH v3 2/4] selinux: Refactor selinuxfs directory populating functions Daniel Burgener
2020-08-20 14:55   ` Stephen Smalley
2020-08-21 13:43   ` Paul Moore
2020-08-19 19:59 ` [PATCH v3 3/4] selinux: Standardize string literal usage for selinuxfs directory names Daniel Burgener
2020-08-20 14:56   ` Stephen Smalley
2020-08-21 13:44   ` Paul Moore
2020-08-19 19:59 ` Daniel Burgener [this message]
2020-08-20 15:23   ` [PATCH v3 4/4] selinux: Create new booleans and class dirs out of tree Stephen Smalley
2020-08-21 13:44   ` Paul Moore

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200819195935.1720168-5-dburgener@linux.microsoft.com \
    --to=dburgener@linux.microsoft.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=omosnace@redhat.com \
    --cc=paul@paul-moore.com \
    --cc=selinux@vger.kernel.org \
    --cc=stephen.smalley.work@gmail.com \
    --cc=viro@zeniv.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).