From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Kailang Yang <kailang@realtek.com>,
Takashi Iwai <tiwai@suse.de>
Subject: [PATCH 4.19 05/46] ALSA: hda/realtek - Add new codec supported for ALCS1200A
Date: Tue, 14 Jan 2020 11:01:22 +0100 [thread overview]
Message-ID: <20200114094341.488946953@linuxfoundation.org> (raw)
In-Reply-To: <20200114094339.608068818@linuxfoundation.org>
From: Kailang Yang <kailang@realtek.com>
commit 6d9ffcff646bbd0ede6c2a59f4cd28414ecec6e0 upstream.
Add ALCS1200A supported.
It was similar as ALC900.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/a9bd3cdaa02d4fa197623448d5c51e50@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 3 +++
1 file changed, 3 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -442,6 +442,7 @@ static void alc_fill_eapd_coef(struct hd
break;
case 0x10ec0899:
case 0x10ec0900:
+ case 0x10ec0b00:
case 0x10ec1168:
case 0x10ec1220:
alc_update_coef_idx(codec, 0x7, 1<<1, 0);
@@ -2521,6 +2522,7 @@ static int patch_alc882(struct hda_codec
case 0x10ec0882:
case 0x10ec0885:
case 0x10ec0900:
+ case 0x10ec0b00:
case 0x10ec1220:
break;
default:
@@ -8989,6 +8991,7 @@ static const struct hda_device_id snd_hd
HDA_CODEC_ENTRY(0x10ec0892, "ALC892", patch_alc662),
HDA_CODEC_ENTRY(0x10ec0899, "ALC898", patch_alc882),
HDA_CODEC_ENTRY(0x10ec0900, "ALC1150", patch_alc882),
+ HDA_CODEC_ENTRY(0x10ec0b00, "ALCS1200A", patch_alc882),
HDA_CODEC_ENTRY(0x10ec1168, "ALC1220", patch_alc882),
HDA_CODEC_ENTRY(0x10ec1220, "ALC1220", patch_alc882),
{} /* terminator */
next prev parent reply other threads:[~2020-01-14 10:07 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-14 10:01 [PATCH 4.19 00/46] 4.19.96-stable review Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 01/46] chardev: Avoid potential use-after-free in chrdev_open() Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 02/46] i2c: fix bus recovery stop mode timing Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 03/46] usb: chipidea: host: Disable port power only if previously enabled Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 04/46] ALSA: usb-audio: Apply the sample rate quirk for Bose Companion 5 Greg Kroah-Hartman
2020-01-14 10:01 ` Greg Kroah-Hartman [this message]
2020-01-14 10:01 ` [PATCH 4.19 06/46] ALSA: hda/realtek - Set EAPD control to default for ALC222 Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 07/46] ALSA: hda/realtek - Add quirk for the bass speaker on Lenovo Yoga X1 7th gen Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 08/46] kernel/trace: Fix do not unregister tracepoints when register sched_migrate_task fail Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 09/46] tracing: Have stack tracer compile when MCOUNT_INSN_SIZE is not defined Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 10/46] tracing: Change offset type to s32 in preempt/irq tracepoints Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 11/46] HID: Fix slab-out-of-bounds read in hid_field_extract Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 12/46] HID: uhid: Fix returning EPOLLOUT from uhid_char_poll Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 13/46] HID: hid-input: clear unmapped usages Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 14/46] Input: add safety guards to input_set_keycode() Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 15/46] Input: input_event - fix struct padding on sparc64 Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 16/46] drm/sun4i: tcon: Set RGB DCLK min. divider based on hardware model Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 17/46] drm/fb-helper: Round up bits_per_pixel if possible Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 18/46] drm/dp_mst: correct the shifting in DP_REMOTE_I2C_READ Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 19/46] can: kvaser_usb: fix interface sanity check Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 20/46] can: gs_usb: gs_usb_probe(): use descriptors of current altsetting Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 21/46] can: mscan: mscan_rx_poll(): fix rx path lockup when returning from polling to irq mode Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 22/46] can: can_dropped_invalid_skb(): ensure an initialized headroom in outgoing CAN sk_buffs Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 23/46] gpiolib: acpi: Turn dmi_system_id table into a generic quirk table Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 24/46] gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 25/46] staging: vt6656: set usb_set_intfdata on driver fail Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 26/46] USB: serial: option: add ZLP support for 0x1bc7/0x9010 Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 27/46] usb: musb: fix idling for suspend after disconnect interrupt Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 28/46] usb: musb: Disable pullup at init Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 29/46] usb: musb: dma: Correct parameter passed to IRQ handler Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 30/46] staging: comedi: adv_pci1710: fix AI channels 16-31 for PCI-1713 Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 31/46] staging: rtl8188eu: Add device code for TP-Link TL-WN727N v5.21 Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 32/46] serdev: Dont claim unsupported ACPI serial devices Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 33/46] tty: link tty and port before configuring it as console Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 34/46] tty: always relink the port Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 35/46] mwifiex: fix possible heap overflow in mwifiex_process_country_ie() Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 36/46] mwifiex: pcie: Fix memory leak in mwifiex_pcie_alloc_cmdrsp_buf Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 37/46] scsi: bfa: release allocated memory in case of error Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 38/46] rtl8xxxu: prevent leaking urb Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 39/46] ath10k: fix memory leak Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 40/46] HID: hiddev: fix mess in hiddev_open() Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 41/46] USB: Fix: Dont skip endpoint descriptors with maxpacket=0 Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 42/46] phy: cpcap-usb: Fix error path when no host driver is loaded Greg Kroah-Hartman
2020-01-14 10:02 ` [PATCH 4.19 43/46] phy: cpcap-usb: Fix flakey host idling and enumerating of devices Greg Kroah-Hartman
2020-01-14 10:02 ` [PATCH 4.19 44/46] netfilter: arp_tables: init netns pointer in xt_tgchk_param struct Greg Kroah-Hartman
2020-01-14 10:02 ` [PATCH 4.19 45/46] netfilter: conntrack: dccp, sctp: handle null timeout argument Greg Kroah-Hartman
2020-01-14 10:02 ` [PATCH 4.19 46/46] netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present Greg Kroah-Hartman
2020-01-14 15:02 ` [PATCH 4.19 00/46] 4.19.96-stable review Jon Hunter
2020-01-14 18:15 ` Guenter Roeck
2020-01-14 20:22 ` shuah
2020-01-15 2:09 ` Daniel Díaz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200114094341.488946953@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=kailang@realtek.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).