From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH 4.14 25/29] hwmon: (lm90) Do not report busy status bit as alarm
Date: Mon, 27 Dec 2021 16:27:35 +0100 [thread overview]
Message-ID: <20211227151319.295532765@linuxfoundation.org> (raw)
In-Reply-To: <20211227151318.475251079@linuxfoundation.org>
From: Guenter Roeck <linux@roeck-us.net>
commit cdc5287acad9ede121924a9c9313544b80d15842 upstream.
Bit 7 of the status register indicates that the chip is busy
doing a conversion. It does not indicate an alarm status.
Stop reporting it as alarm status bit.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hwmon/lm90.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -197,6 +197,7 @@ enum chips { lm90, adm1032, lm99, lm86,
#define LM90_STATUS_RHIGH (1 << 4) /* remote high temp limit tripped */
#define LM90_STATUS_LLOW (1 << 5) /* local low temp limit tripped */
#define LM90_STATUS_LHIGH (1 << 6) /* local high temp limit tripped */
+#define LM90_STATUS_BUSY (1 << 7) /* conversion is ongoing */
#define MAX6696_STATUS2_R2THRM (1 << 1) /* remote2 THERM limit tripped */
#define MAX6696_STATUS2_R2OPEN (1 << 2) /* remote2 is an open circuit */
@@ -786,7 +787,7 @@ static int lm90_update_device(struct dev
val = lm90_read_reg(client, LM90_REG_R_STATUS);
if (val < 0)
return val;
- data->alarms = val; /* lower 8 bit of alarms */
+ data->alarms = val & ~LM90_STATUS_BUSY;
if (data->kind == max6696) {
val = lm90_select_remote_channel(client, data, 1);
next prev parent reply other threads:[~2021-12-27 15:30 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-27 15:27 [PATCH 4.14 00/29] 4.14.260-rc1 review Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 01/29] net: usb: lan78xx: add Allied Telesis AT29M2-AF Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 02/29] can: kvaser_usb: get CAN clock frequency from device Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 03/29] HID: holtek: fix mouse probing Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 04/29] spi: change clk_disable_unprepare to clk_unprepare Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 05/29] IB/qib: Fix memory leak in qib_user_sdma_queue_pkts() Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 06/29] netfilter: fix regression in looped (broad|multi)casts MAC handling Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 07/29] qlcnic: potential dereference null pointer of rx_queue->page_ring Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 08/29] net: accept UFOv6 packages in virtio_net_hdr_to_skb Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 09/29] net: skip virtio_net_hdr_set_proto if protocol already set Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 10/29] bonding: fix ad_actor_system option setting to default Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 11/29] fjes: Check for error irq Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 12/29] drivers: net: smc911x: " Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 13/29] sfc: falcon: Check null pointer of rx_queue->page_ring Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 14/29] hwmon: (lm90) Fix usage of CONFIG2 register in detect function Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 15/29] ALSA: jack: Check the return value of kstrdup() Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 16/29] ALSA: drivers: opl3: Fix incorrect use of vp->state Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 17/29] Input: atmel_mxt_ts - fix double free in mxt_read_info_block Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 18/29] x86/pkey: Fix undefined behaviour with PKRU_WD_BIT Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 19/29] pinctrl: stm32: consider the GPIO offset to expose all the GPIO lines Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 20/29] ARM: 9169/1: entry: fix Thumb2 bug in iWMMXt exception handling Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 21/29] f2fs: fix to do sanity check on last xattr entry in __f2fs_setxattr() Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 22/29] usb: gadget: u_ether: fix race in setting MAC address in setup phase Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 23/29] KVM: VMX: Fix stale docs for kvm-intel.emulate_invalid_guest_state Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 24/29] Input: i8042 - enable deferred probe quirk for ASUS UM325UA Greg Kroah-Hartman
2021-12-27 15:27 ` Greg Kroah-Hartman [this message]
2021-12-27 15:27 ` [PATCH 4.14 26/29] ax25: NPD bug when detaching AX25 device Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 27/29] hamradio: defer ax25 kfree after unregister_netdev Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 28/29] hamradio: improve the incomplete fix to avoid NPD Greg Kroah-Hartman
2021-12-27 15:27 ` [PATCH 4.14 29/29] phonet/pep: refuse to enable an unbound pipe Greg Kroah-Hartman
2021-12-28 11:27 ` [PATCH 4.14 00/29] 4.14.260-rc1 review Naresh Kamboju
2021-12-28 17:05 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211227151319.295532765@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).