From: "Enderborg, Peter" <Peter.Enderborg@sony.com>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: Jiri Kosina <jikos@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"stable@vger.kernel.org" <stable@vger.kernel.org>
Subject: Re: [PATCH 5.4 17/78] HID: Fix slab-out-of-bounds read in hid_field_extract (Broken!)
Date: Fri, 7 Feb 2020 08:11:25 +0000 [thread overview]
Message-ID: <96c523ea-799f-ad2f-f1c4-46ff6f9f6d6c@sony.com> (raw)
In-Reply-To: <Pine.LNX.4.44L0.2002061011140.1503-100000@iolanthe.rowland.org>
On 2/6/20 4:14 PM, Alan Stern wrote:
> On Thu, 6 Feb 2020, Enderborg, Peter wrote:
>
>>> Also, please post the output from "lsusb -v" for the StreamDeck.
>> Bus 002 Device 008: ID 0fd9:0060 Elgato Systems GmbH Stream Deck
>> Device Descriptor:
>> bLength 18
>> bDescriptorType 1
>> bcdUSB 2.00
>> bDeviceClass 0
>> bDeviceSubClass 0
>> bDeviceProtocol 0
>> bMaxPacketSize0 64
>> idVendor 0x0fd9 Elgato Systems GmbH
>> idProduct 0x0060
>> bcdDevice 1.00
>> iManufacturer 1
>> iProduct 2
>> iSerial 3
>> bNumConfigurations 1
>> Configuration Descriptor:
>> bLength 9
>> bDescriptorType 2
>> wTotalLength 0x0029
>> bNumInterfaces 1
>> bConfigurationValue 1
>> iConfiguration 0
>> bmAttributes 0xe0
>> Self Powered
>> Remote Wakeup
>> MaxPower 400mA
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 0
>> bNumEndpoints 2
>> bInterfaceClass 3 Human Interface Device
>> bInterfaceSubClass 0
>> bInterfaceProtocol 0
>> iInterface 0
>> HID Device Descriptor:
>> bLength 9
>> bDescriptorType 33
>> bcdHID 1.11
>> bCountryCode 0 Not supported
>> bNumDescriptors 1
>> bDescriptorType 34 Report
>> wDescriptorLength 248
>> Report Descriptors:
>> ** UNAVAILABLE **
> I was hoping to see the report descriptors. This would produce the
> actual descriptors as sent by the device, not the kernel's
> interpretation or modification of the descriptors.
>
> I guess you have to unbind the device from the usbhid driver first in
> order for lsusb to get them. Can you do that?
>
> Alan Stern
>
Im not sure exatly what you need to unbind. But I assume this is what you want:
lsusb -v -d 0fd9:0060
Bus 002 Device 002: ID 0fd9:0060 Elgato Systems GmbH Stream Deck
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0fd9 Elgato Systems GmbH
idProduct 0x0060
bcdDevice 1.00
iManufacturer 1 Elgato Systems
iProduct 2 Stream Deck
iSerial 3 AL01H1A08945
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0029
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 400mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 248
Report Descriptor: (length is 248)
Item(Global): Usage Page, data= [ 0x0c ] 12
Consumer
Item(Local ): Usage, data= [ 0x01 ] 1
Consumer Control
Item(Main ): Collection, data= [ 0x01 ] 1
Application
Item(Local ): Usage, data= [ 0x01 ] 1
Consumer Control
Item(Global): Usage Page, data= [ 0x09 ] 9
Buttons
Item(Local ): Usage Minimum, data= [ 0x01 ] 1
Button 1 (Primary)
Item(Local ): Usage Maximum, data= [ 0x10 ] 16
(null)
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Report Count, data= [ 0x10 ] 16
Item(Global): Report ID, data= [ 0x01 ] 1
Item(Main ): Input, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Local ): Usage, data= [ 0x00 0xff ] 65280
(null)
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Report Count, data= [ 0x10 ] 16
Item(Global): Report ID, data= [ 0xa0 ] 160
Item(Main ): Input, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Local ): Usage, data= [ 0x00 0xff ] 65280
(null)
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Report Count, data= [ 0x10 ] 16
Item(Global): Report ID, data= [ 0xa1 ] 161
Item(Main ): Input, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Local ): Usage, data= [ 0x00 0xff ] 65280
(null)
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Report Count, data= [ 0xfe 0x1f ] 8190
Item(Global): Report ID, data= [ 0x02 ] 2
Item(Main ): Output, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): Collection, data= [ 0x00 ] 0
Physical
Item(Local ): Usage, data= [ 0x00 0xff ] 65280
(null)
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Report Count, data= [ 0x10 ] 16
Item(Global): Report ID, data= [ 0x03 ] 3
Item(Main ): Feature, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): End Collection, data=none
Item(Main ): Collection, data= [ 0x00 ] 0
Physical
Item(Local ): Usage, data= [ 0x00 0xff ] 65280
(null)
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Report Count, data= [ 0x10 ] 16
Item(Global): Report ID, data= [ 0x04 ] 4
Item(Main ): Feature, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): End Collection, data=none
Item(Main ): Collection, data= [ 0x00 ] 0
Physical
Item(Local ): Usage, data= [ 0x00 0xff ] 65280
(null)
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Report Count, data= [ 0x10 ] 16
Item(Global): Report ID, data= [ 0x05 ] 5
Item(Main ): Feature, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): End Collection, data=none
Item(Main ): Collection, data= [ 0x00 ] 0
Physical
Item(Local ): Usage, data= [ 0x00 0xff ] 65280
(null)
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Report Count, data= [ 0x01 ] 1
Item(Global): Report ID, data= [ 0x06 ] 6
Item(Main ): Feature, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): End Collection, data=none
Item(Main ): Collection, data= [ 0x00 ] 0
Physical
Item(Local ): Usage, data= [ 0x00 0xff ] 65280
(null)
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Report Count, data= [ 0x10 ] 16
Item(Global): Report ID, data= [ 0x07 ] 7
Item(Main ): Feature, data= [ 0x04 ] 4
Data Array Relative No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): End Collection, data=none
Item(Main ): Collection, data= [ 0x00 ] 0
Physical
Item(Local ): Usage, data= [ 0x00 0xff ] 65280
(null)
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Report Count, data= [ 0x01 ] 1
Item(Global): Report ID, data= [ 0x08 ] 8
Item(Main ): Feature, data= [ 0x04 ] 4
Data Array Relative No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): End Collection, data=none
Item(Main ): Collection, data= [ 0x00 ] 0
Physical
Item(Local ): Usage, data= [ 0x00 0xff ] 65280
(null)
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Report Count, data= [ 0x10 ] 16
Item(Global): Report ID, data= [ 0x09 ] 9
Item(Main ): Feature, data= [ 0x04 ] 4
Data Array Relative No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): End Collection, data=none
Item(Main ): Collection, data= [ 0x00 ] 0
Physical
Item(Local ): Usage, data= [ 0x00 0xff ] 65280
(null)
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Report Count, data= [ 0x10 ] 16
Item(Global): Report ID, data= [ 0x0a ] 10
Item(Main ): Feature, data= [ 0x04 ] 4
Data Array Relative No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): End Collection, data=none
Item(Main ): Collection, data= [ 0x00 ] 0
Physical
Item(Local ): Usage, data= [ 0x00 0xff ] 65280
(null)
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Report Count, data= [ 0x10 ] 16
Item(Global): Report ID, data= [ 0x0b ] 11
Item(Main ): Feature, data= [ 0x04 ] 4
Data Array Relative No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): End Collection, data=none
Item(Main ): End Collection, data=none
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
next prev parent reply other threads:[~2020-02-07 8:11 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-14 10:00 [PATCH 5.4 00/78] 5.4.12-stable review Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 01/78] chardev: Avoid potential use-after-free in chrdev_open() Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 02/78] i2c: fix bus recovery stop mode timing Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 03/78] powercap: intel_rapl: add NULL pointer check to rapl_mmio_cpu_online() Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 04/78] usb: chipidea: host: Disable port power only if previously enabled Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 05/78] ALSA: usb-audio: Apply the sample rate quirk for Bose Companion 5 Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 06/78] ALSA: hda/realtek - Add new codec supported for ALCS1200A Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 07/78] ALSA: hda/realtek - Set EAPD control to default for ALC222 Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 08/78] ALSA: hda/realtek - Add quirk for the bass speaker on Lenovo Yoga X1 7th gen Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 09/78] tpm: Revert "tpm_tis: reserve chip for duration of tpm_tis_core_init" Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 10/78] tpm: Revert "tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interrupts" Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 11/78] tpm: Revert "tpm_tis_core: Turn on the TPM before probing IRQs" Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 12/78] tpm: Handle negative priv->response_len in tpm_common_read() Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 13/78] rtc: sun6i: Add support for RTC clocks on R40 Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 14/78] kernel/trace: Fix do not unregister tracepoints when register sched_migrate_task fail Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 15/78] tracing: Have stack tracer compile when MCOUNT_INSN_SIZE is not defined Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 16/78] tracing: Change offset type to s32 in preempt/irq tracepoints Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 17/78] HID: Fix slab-out-of-bounds read in hid_field_extract Greg Kroah-Hartman
2020-02-05 7:12 ` [PATCH 5.4 17/78] HID: Fix slab-out-of-bounds read in hid_field_extract (Broken!) peter enderborg
2020-02-05 9:32 ` Greg Kroah-Hartman
2020-02-05 9:49 ` Enderborg, Peter
2020-02-05 9:54 ` Jiri Kosina
2020-02-05 15:00 ` Alan Stern
2020-02-06 7:00 ` Enderborg, Peter
2020-02-06 15:14 ` Alan Stern
2020-02-07 8:11 ` Enderborg, Peter [this message]
2020-02-07 15:22 ` Alan Stern
2020-02-10 12:08 ` [PATCH] HID: Extend report buffer size Peter Enderborg
2020-02-10 12:21 ` Greg Kroah-Hartman
2020-02-10 12:40 ` Peter Enderborg
2020-02-10 13:43 ` Greg Kroah-Hartman
2020-02-10 15:01 ` Alan Stern
2020-02-11 8:35 ` peter enderborg
2020-02-11 14:54 ` Alan Stern
2020-02-11 15:01 ` Jiri Kosina
2020-01-14 10:00 ` [PATCH 5.4 18/78] HID: uhid: Fix returning EPOLLOUT from uhid_char_poll Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 19/78] HID: hidraw: Fix returning EPOLLOUT from hidraw_poll Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 20/78] HID: hid-input: clear unmapped usages Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 21/78] Input: add safety guards to input_set_keycode() Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 22/78] Input: input_event - fix struct padding on sparc64 Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 23/78] drm/i915: Add Wa_1408615072 and Wa_1407596294 to icl,ehl Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 24/78] drm/amdgpu: add DRIVER_SYNCOBJ_TIMELINE to amdgpu Greg Kroah-Hartman
2020-01-14 14:31 ` Deucher, Alexander
2020-01-14 14:39 ` Greg Kroah-Hartman
2020-01-14 10:00 ` [PATCH 5.4 25/78] Revert "drm/amdgpu: Set no-retry as default." Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 26/78] drm/sun4i: tcon: Set RGB DCLK min. divider based on hardware model Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 27/78] drm/fb-helper: Round up bits_per_pixel if possible Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 28/78] drm/dp_mst: correct the shifting in DP_REMOTE_I2C_READ Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 29/78] drm/i915: Add Wa_1407352427:icl,ehl Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 30/78] drm/i915/gt: Mark up virtual engine uabi_instance Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 31/78] IB/hfi1: Adjust flow PSN with the correct resync_psn Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 32/78] can: kvaser_usb: fix interface sanity check Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 33/78] can: gs_usb: gs_usb_probe(): use descriptors of current altsetting Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 34/78] can: tcan4x5x: tcan4x5x_can_probe(): get the device out of standby before register access Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 35/78] can: mscan: mscan_rx_poll(): fix rx path lockup when returning from polling to irq mode Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 36/78] can: can_dropped_invalid_skb(): ensure an initialized headroom in outgoing CAN sk_buffs Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 37/78] gpiolib: acpi: Turn dmi_system_id table into a generic quirk table Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 38/78] gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 39/78] pstore/ram: Regularize prz label allocation lifetime Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 40/78] staging: vt6656: set usb_set_intfdata on driver fail Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 41/78] staging: vt6656: Fix non zero logical return of, usb_control_msg Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 42/78] usb: cdns3: should not use the same dev_id for shared interrupt handler Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 43/78] usb: ohci-da8xx: ensure error return on variable error is set Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 44/78] USB-PD tcpm: bad warning+size, PPS adapters Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 45/78] USB: serial: option: add ZLP support for 0x1bc7/0x9010 Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 46/78] usb: musb: fix idling for suspend after disconnect interrupt Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 47/78] usb: musb: Disable pullup at init Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 48/78] usb: musb: dma: Correct parameter passed to IRQ handler Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 49/78] staging: comedi: adv_pci1710: fix AI channels 16-31 for PCI-1713 Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 50/78] staging: vt6656: correct return of vnt_init_registers Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 51/78] staging: vt6656: limit reg output to block size Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 52/78] staging: rtl8188eu: Add device code for TP-Link TL-WN727N v5.21 Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 53/78] serdev: Dont claim unsupported ACPI serial devices Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 54/78] iommu/vt-d: Fix adding non-PCI devices to Intel IOMMU Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 55/78] tty: link tty and port before configuring it as console Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 56/78] tty: always relink the port Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 57/78] arm64: Move __ARCH_WANT_SYS_CLONE3 definition to uapi headers Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 58/78] arm64: Implement copy_thread_tls Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 59/78] arm: " Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 60/78] parisc: " Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 61/78] riscv: " Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 62/78] xtensa: " Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 63/78] clone3: ensure copy_thread_tls is implemented Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 64/78] um: Implement copy_thread_tls Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 65/78] staging: vt6656: remove bool from vnt_radio_power_on ret Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 66/78] mwifiex: fix possible heap overflow in mwifiex_process_country_ie() Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 67/78] mwifiex: pcie: Fix memory leak in mwifiex_pcie_alloc_cmdrsp_buf Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 68/78] rpmsg: char: release allocated memory Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 69/78] scsi: bfa: release allocated memory in case of error Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 70/78] rtl8xxxu: prevent leaking urb Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 71/78] ath10k: fix memory leak Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 72/78] HID: hiddev: fix mess in hiddev_open() Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 73/78] USB: Fix: Dont skip endpoint descriptors with maxpacket=0 Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 74/78] phy: cpcap-usb: Fix error path when no host driver is loaded Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 75/78] phy: cpcap-usb: Fix flakey host idling and enumerating of devices Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 76/78] netfilter: arp_tables: init netns pointer in xt_tgchk_param struct Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 77/78] netfilter: conntrack: dccp, sctp: handle null timeout argument Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 5.4 78/78] netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present Greg Kroah-Hartman
2020-01-14 15:02 ` [PATCH 5.4 00/78] 5.4.12-stable review Jon Hunter
2020-01-14 15:18 ` Greg Kroah-Hartman
2020-01-14 18:17 ` Guenter Roeck
2020-01-14 18:53 ` Greg Kroah-Hartman
2020-01-14 20:19 ` shuah
2020-01-14 21:55 ` Greg Kroah-Hartman
2020-01-15 2:09 ` Daniel Díaz
2020-01-15 8:12 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=96c523ea-799f-ad2f-f1c4-46ff6f9f6d6c@sony.com \
--to=peter.enderborg@sony.com \
--cc=gregkh@linuxfoundation.org \
--cc=jikos@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).