From: CKI Project <cki-project@redhat.com>
To: Linux Stable maillist <stable@vger.kernel.org>
Subject: ✅ PASS: Stable queue: queue-5.2
Date: Fri, 16 Aug 2019 09:31:14 -0400 [thread overview]
Message-ID: <cki.28A7053AE9.AG415YRJ3X@redhat.com> (raw)
Hello,
We ran automated tests on a patchset that was proposed for merging into this
kernel tree. The patches were applied to:
Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Commit: aad39e30fb9e - Linux 5.2.9
The results of these automated tests are provided below.
Overall result: PASSED
Merge: OK
Compile: OK
Tests: OK
All kernel binaries, config files, and logs are available for download here:
https://artifacts.cki-project.org/pipelines/104462
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Merge testing
-------------
We cloned this repository and checked out the following commit:
Repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Commit: aad39e30fb9e - Linux 5.2.9
We grabbed the c3aa6e9e5378 commit of the stable queue repository.
We then merged the patchset with `git am`:
keys-trusted-allow-module-init-if-tpm-is-inactive-or-deactivated.patch
sh-kernel-hw_breakpoint-fix-missing-break-in-switch-statement.patch
seq_file-fix-problem-when-seeking-mid-record.patch
mm-hmm-fix-bad-subpage-pointer-in-try_to_unmap_one.patch
mm-mempolicy-make-the-behavior-consistent-when-mpol_mf_move-and-mpol_mf_strict-were-specified.patch
mm-mempolicy-handle-vma-with-unmovable-pages-mapped-correctly-in-mbind.patch
mm-z3fold.c-fix-z3fold_destroy_pool-ordering.patch
mm-z3fold.c-fix-z3fold_destroy_pool-race-condition.patch
mm-memcontrol.c-fix-use-after-free-in-mem_cgroup_iter.patch
mm-usercopy-use-memory-range-to-be-accessed-for-wraparound-check.patch
mm-vmscan-do-not-special-case-slab-reclaim-when-watermarks-are-boosted.patch
Compile testing
---------------
We compiled the kernel for 3 architectures:
aarch64:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg
ppc64le:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg
x86_64:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
✅ Boot test [0]
✅ xfstests: xfs [1]
✅ selinux-policy: serge-testsuite [2]
Host 2:
✅ Boot test [0]
✅ Podman system integration test (as root) [3]
✅ Podman system integration test (as user) [3]
✅ LTP lite [4]
✅ Loopdev Sanity [5]
✅ jvm test suite [6]
✅ AMTU (Abstract Machine Test Utility) [7]
✅ LTP: openposix test suite [8]
✅ audit: audit testsuite test [9]
✅ httpd: mod_ssl smoke sanity [10]
✅ iotop: sanity [11]
✅ tuned: tune-processes-through-perf [12]
✅ Usex - version 1.9-29 [13]
✅ stress: stress-ng [14]
ppc64le:
Host 1:
✅ Boot test [0]
✅ Podman system integration test (as root) [3]
✅ Podman system integration test (as user) [3]
✅ LTP lite [4]
✅ Loopdev Sanity [5]
✅ jvm test suite [6]
✅ AMTU (Abstract Machine Test Utility) [7]
✅ LTP: openposix test suite [8]
✅ audit: audit testsuite test [9]
✅ httpd: mod_ssl smoke sanity [10]
✅ iotop: sanity [11]
✅ tuned: tune-processes-through-perf [12]
✅ Usex - version 1.9-29 [13]
Host 2:
✅ Boot test [0]
✅ xfstests: xfs [1]
✅ selinux-policy: serge-testsuite [2]
x86_64:
Host 1:
✅ Boot test [0]
✅ Podman system integration test (as root) [3]
✅ Podman system integration test (as user) [3]
✅ LTP lite [4]
✅ Loopdev Sanity [5]
✅ jvm test suite [6]
✅ AMTU (Abstract Machine Test Utility) [7]
✅ LTP: openposix test suite [8]
✅ audit: audit testsuite test [9]
✅ httpd: mod_ssl smoke sanity [10]
✅ iotop: sanity [11]
✅ tuned: tune-processes-through-perf [12]
✅ pciutils: sanity smoke test [15]
✅ Usex - version 1.9-29 [13]
✅ stress: stress-ng [14]
Host 2:
✅ Boot test [0]
✅ xfstests: xfs [1]
✅ selinux-policy: serge-testsuite [2]
Test source:
💚 Pull requests are welcome for new tests or improvements to existing tests!
[0]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution/kpkginstall
[1]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/filesystems/xfs/xfstests
[2]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/packages/selinux-policy/serge-testsuite
[3]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/container/podman
[4]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution/ltp/lite
[5]: https://github.com/CKI-project/tests-beaker/archive/master.zip#filesystems/loopdev/sanity
[6]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/jvm
[7]: https://github.com/CKI-project/tests-beaker/archive/master.zip#misc/amtu
[8]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution/ltp/openposix_testsuite
[9]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/audit/audit-testsuite
[10]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/httpd/mod_ssl-smoke
[11]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/iotop/sanity
[12]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/tuned/tune-processes-through-perf
[13]: https://github.com/CKI-project/tests-beaker/archive/master.zip#standards/usex/1.9-29
[14]: https://github.com/CKI-project/tests-beaker/archive/master.zip#stress/stress-ng
[15]: https://github.com/CKI-project/tests-beaker/archive/master.zip#pciutils/sanity-smoke
next reply other threads:[~2019-08-16 13:31 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-16 13:31 CKI Project [this message]
-- strict thread matches above, loose matches on Subject: below --
2019-09-20 7:39 ✅ PASS: Stable queue: queue-5.2 CKI Project
2019-09-20 9:17 ` Veronika Kabatova
2019-09-20 6:17 CKI Project
2019-09-20 0:58 CKI Project
2019-09-19 20:05 CKI Project
2019-09-19 19:56 CKI Project
2019-09-19 18:02 CKI Project
2019-09-19 18:40 ` Major Hayden
2019-09-19 15:36 CKI Project
2019-09-18 4:57 CKI Project
2019-09-18 2:38 CKI Project
2019-09-18 0:29 CKI Project
2019-09-18 0:20 CKI Project
2019-09-17 20:29 CKI Project
2019-09-17 20:23 CKI Project
2019-09-17 12:09 CKI Project
2019-09-17 10:58 CKI Project
2019-09-16 17:53 CKI Project
2019-09-16 4:52 CKI Project
2019-09-13 5:28 CKI Project
2019-09-11 14:08 CKI Project
2019-09-08 18:46 CKI Project
2019-09-08 14:49 CKI Project
2019-09-08 2:35 CKI Project
2019-09-06 15:20 CKI Project
2019-09-06 0:55 CKI Project
2019-09-05 3:19 CKI Project
2019-09-04 17:20 CKI Project
2019-09-04 9:43 CKI Project
2019-09-04 1:37 CKI Project
2019-09-04 0:50 CKI Project
2019-09-03 13:09 CKI Project
2019-09-03 12:21 CKI Project
2019-09-03 6:23 CKI Project
2019-09-02 23:04 CKI Project
2019-08-30 13:35 CKI Project
2019-08-29 19:35 CKI Project
2019-08-27 9:38 CKI Project
2019-08-27 1:47 CKI Project
2019-08-26 23:55 CKI Project
2019-08-26 23:50 CKI Project
2019-08-26 15:35 CKI Project
2019-08-26 6:14 CKI Project
2019-08-21 5:19 CKI Project
2019-08-21 4:23 CKI Project
2019-08-20 22:57 CKI Project
2019-08-19 7:50 CKI Project
2019-08-18 9:29 CKI Project
2019-08-15 6:05 CKI Project
2019-08-15 3:24 CKI Project
2019-08-14 9:17 CKI Project
2019-08-14 2:15 CKI Project
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cki.28A7053AE9.AG415YRJ3X@redhat.com \
--to=cki-project@redhat.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).