From: CKI Project <cki-project@redhat.com>
To: Linux Stable maillist <stable@vger.kernel.org>
Subject: ✅ PASS: Stable queue: queue-5.1
Date: Sun, 9 Jun 2019 09:50:01 -0400 [thread overview]
Message-ID: <cki.39B7925324.MO2EGDUY57@redhat.com> (raw)
Hello,
We ran automated tests on a patchset that was proposed for merging into this
kernel tree. The patches were applied to:
Kernel repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Commit: 937cc0cc22a2 - Linux 5.1.8
The results of these automated tests are provided below.
Overall result: PASSED
Merge: OK
Compile: OK
Tests: OK
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Merge testing
-------------
We cloned this repository and checked out the following commit:
Repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Commit: 937cc0cc22a2 - Linux 5.1.8
We then merged the patchset with `git am`:
ethtool-fix-potential-userspace-buffer-overflow.patch
fix-memory-leak-in-sctp_process_init.patch
ipv4-not-do-cache-for-local-delivery-if-bc_forwarding-is-enabled.patch
ipv6-fix-the-check-before-getting-the-cookie-in-rt6_get_cookie.patch
net-ethernet-ti-cpsw_ethtool-fix-ethtool-ring-param-set.patch
net-mvpp2-use-strscpy-to-handle-stat-strings.patch
net-rds-fix-memory-leak-in-rds_ib_flush_mr_pool.patch
net-sfp-read-eeprom-in-maximum-16-byte-increments.patch
packet-unconditionally-free-po-rollover.patch
pktgen-do-not-sleep-with-the-thread-lock-held.patch
revert-fib_rules-return-0-directly-if-an-exactly-same-rule-exists-when-nlm_f_excl-not-supplied.patch
udp-only-choose-unbound-udp-socket-for-multicast-when-not-in-a-vrf.patch
ipv6-use-read_once-for-inet-hdrincl-as-in-ipv4.patch
ipv6-fix-efault-on-sendto-with-icmpv6-and-hdrincl.patch
net-aquantia-fix-wol-configuration-not-applied-sometimes.patch
neighbor-reset-gc_entries-counter-if-new-entry-is-released-before-insert.patch
neighbor-call-__ipv4_neigh_lookup_noref-in-neigh_xmit.patch
cls_matchall-avoid-panic-when-receiving-a-packet-before-filter-set.patch
ipmr_base-do-not-reset-index-in-mr_table_dump.patch
net-mlx4_en-ethtool-remove-unsupported-sfp-eeprom-high-pages-query.patch
net-tls-replace-the-sleeping-lock-around-rx-resync-with-a-bit-lock.patch
rcu-locking-and-unlocking-need-to-always-be-at-least-barriers.patch
habanalabs-fix-debugfs-code.patch
arc-mm-sigsegv-userspace-trying-to-access-kernel-virtual-memory.patch
parisc-use-implicit-space-register-selection-for-loading-the-coherence-index-of-i-o-pdirs.patch
parisc-fix-crash-due-alternative-coding-for-np-iopdir_fdc-bit.patch
sunrpc-fix-regression-in-umount-of-a-secure-mount.patch
sunrpc-fix-a-use-after-free-when-a-server-rejects-the-rpcsec_gss-credential.patch
nfsv4.1-again-fix-a-race-where-cb_notify_lock-fails-to-wake-a-waiter.patch
nfsv4.1-fix-bug-only-first-cb_notify_lock-is-handled.patch
fuse-fallocate-fix-return-with-locked-inode.patch
fuse-fix-copy_file_range-in-the-writeback-case.patch
pstore-set-tfm-to-null-on-free_buf_for_compression.patch
pstore-ram-run-without-kernel-crash-dump-region.patch
kbuild-use-more-portable-command-v-for-cc-cross-prefix.patch
memstick-mspro_block-fix-an-error-code-in-mspro_block_issue_req.patch
mmc-tmio-fix-scc-error-handling-to-avoid-false-positive-crc-error.patch
mmc-sdhci_am654-fix-slottype-write.patch
x86-power-fix-nosmt-vs-hibernation-triple-fault-during-resume.patch
x86-insn-eval-fix-use-after-free-access-to-ldt-entry.patch
i2c-xiic-add-max_read_len-quirk.patch
s390-mm-fix-address-space-detection-in-exception-handling.patch
nvme-rdma-fix-queue-mapping-when-queue-count-is-limited.patch
xen-blkfront-switch-kcalloc-to-kvcalloc-for-large-array-allocation.patch
mips-bounds-check-virt_addr_valid.patch
mips-pistachio-build-uimage.gz-by-default.patch
genwqe-prevent-an-integer-overflow-in-the-ioctl.patch
test_firmware-use-correct-snprintf-limit.patch
drm-rockchip-fix-fb-references-in-async-update.patch
drm-vc4-fix-fb-references-in-async-update.patch
drm-gma500-cdv-check-vbt-config-bits-when-detecting-lvds-panels.patch
drm-msm-fix-fb-references-in-async-update.patch
drm-add-non-desktop-quirk-for-valve-hmds.patch
drm-nouveau-add-kconfig-option-to-turn-off-nouveau-legacy-contexts.-v3.patch
drm-add-non-desktop-quirks-to-sensics-and-osvr-headsets.patch
drm-fix-timestamp-docs-for-variable-refresh-properties.patch
drm-amdgpu-psp-move-psp-version-specific-function-pointers-to-early_init.patch
drm-radeon-prefer-lower-reference-dividers.patch
drm-amdgpu-remove-atpx_dgpu_req_power_for_displays-check-when-hotplug-in.patch
drm-i915-fix-i915_exec_ring_mask.patch
drm-amdgpu-soc15-skip-reset-on-init.patch
drm-amd-display-add-asicrev_is_picasso.patch
drm-amdgpu-fix-ring-test-failure-issue-during-s3-in-vce-3.0-v2.patch
drm-i915-fbc-disable-framebuffer-compression-on-geminilake.patch
drm-i915-gvt-emit-init-breadcrumb-for-gvt-request.patch
drm-i915-maintain-consistent-documentation-subsection-ordering.patch
drm-don-t-block-fb-changes-for-async-plane-updates.patch
drm-i915-gvt-initialize-intel_gvt_gtt_entry-in-stack.patch
drm-amd-fix-fb-references-in-async-update.patch
tty-serial_core-add-install.patch
Compile testing
---------------
We compiled the kernel for 4 architectures:
aarch64:
build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg
configuration: https://artifacts.cki-project.org/builds/aarch64/kernel-stable_queue_5.1-aarch64-977e6010aeacb9187d5c93970f043e9eafb35774.config
kernel build: https://artifacts.cki-project.org/builds/aarch64/kernel-stable_queue_5.1-aarch64-977e6010aeacb9187d5c93970f043e9eafb35774.tar.gz
ppc64le:
build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg
configuration: https://artifacts.cki-project.org/builds/ppc64le/kernel-stable_queue_5.1-ppc64le-977e6010aeacb9187d5c93970f043e9eafb35774.config
kernel build: https://artifacts.cki-project.org/builds/ppc64le/kernel-stable_queue_5.1-ppc64le-977e6010aeacb9187d5c93970f043e9eafb35774.tar.gz
s390x:
build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg
configuration: https://artifacts.cki-project.org/builds/s390x/kernel-stable_queue_5.1-s390x-977e6010aeacb9187d5c93970f043e9eafb35774.config
kernel build: https://artifacts.cki-project.org/builds/s390x/kernel-stable_queue_5.1-s390x-977e6010aeacb9187d5c93970f043e9eafb35774.tar.gz
x86_64:
build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg
configuration: https://artifacts.cki-project.org/builds/x86_64/kernel-stable_queue_5.1-x86_64-977e6010aeacb9187d5c93970f043e9eafb35774.config
kernel build: https://artifacts.cki-project.org/builds/x86_64/kernel-stable_queue_5.1-x86_64-977e6010aeacb9187d5c93970f043e9eafb35774.tar.gz
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
✅ Boot test [0]
✅ selinux-policy: serge-testsuite [1]
Host 2:
✅ Boot test [0]
✅ LTP lite [2]
✅ Loopdev Sanity [3]
✅ AMTU (Abstract Machine Test Utility) [4]
✅ Ethernet drivers sanity [5]
✅ audit: audit testsuite test [6]
✅ httpd: mod_ssl smoke sanity [7]
✅ iotop: sanity [8]
✅ tuned: tune-processes-through-perf [9]
✅ Usex - version 1.9-29 [10]
🚧 ✅ Networking socket: fuzz [11]
🚧 ✅ Networking sctp-auth: sockopts test [12]
🚧 ✅ Networking route: pmtu [13]
🚧 ✅ Networking route_func: local [14]
🚧 ✅ Networking route_func: forward [14]
🚧 ✅ Networking UDP: socket [15]
ppc64le:
Host 1:
✅ Boot test [0]
✅ LTP lite [2]
✅ Loopdev Sanity [3]
✅ AMTU (Abstract Machine Test Utility) [4]
✅ Ethernet drivers sanity [5]
✅ audit: audit testsuite test [6]
✅ httpd: mod_ssl smoke sanity [7]
✅ iotop: sanity [8]
✅ tuned: tune-processes-through-perf [9]
✅ Usex - version 1.9-29 [10]
🚧 ✅ Networking socket: fuzz [11]
🚧 ✅ Networking sctp-auth: sockopts test [12]
🚧 ✅ Networking route: pmtu [13]
🚧 ✅ Networking route_func: local [14]
🚧 ✅ Networking route_func: forward [14]
🚧 ✅ Networking UDP: socket [15]
Host 2:
✅ Boot test [0]
✅ selinux-policy: serge-testsuite [1]
s390x:
Host 1:
✅ Boot test [0]
✅ selinux-policy: serge-testsuite [1]
Host 2:
✅ Boot test [0]
✅ LTP lite [2]
✅ Loopdev Sanity [3]
✅ Ethernet drivers sanity [5]
✅ audit: audit testsuite test [6]
✅ httpd: mod_ssl smoke sanity [7]
✅ iotop: sanity [8]
✅ tuned: tune-processes-through-perf [9]
🚧 ✅ Networking socket: fuzz [11]
🚧 ✅ Networking sctp-auth: sockopts test [12]
🚧 ✅ Networking route: pmtu [13]
🚧 ✅ Networking route_func: local [14]
🚧 ✅ Networking route_func: forward [14]
🚧 ✅ Networking UDP: socket [15]
x86_64:
Host 1:
✅ Boot test [0]
✅ LTP lite [2]
✅ Loopdev Sanity [3]
✅ AMTU (Abstract Machine Test Utility) [4]
✅ Ethernet drivers sanity [5]
✅ audit: audit testsuite test [6]
✅ httpd: mod_ssl smoke sanity [7]
✅ iotop: sanity [8]
✅ tuned: tune-processes-through-perf [9]
✅ Usex - version 1.9-29 [10]
🚧 ✅ Networking socket: fuzz [11]
🚧 ✅ Networking sctp-auth: sockopts test [12]
🚧 ✅ Networking route: pmtu [13]
🚧 ✅ Networking route_func: local [14]
🚧 ✅ Networking route_func: forward [14]
🚧 ✅ Networking UDP: socket [15]
Host 2:
✅ Boot test [0]
✅ selinux-policy: serge-testsuite [1]
Test source:
💚 Pull requests are welcome for new tests or improvements to existing tests!
[0]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution/kpkginstall
[1]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/packages/selinux-policy/serge-testsuite
[2]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution/ltp/lite
[3]: https://github.com/CKI-project/tests-beaker/archive/master.zip#filesystems/loopdev/sanity
[4]: https://github.com/CKI-project/tests-beaker/archive/master.zip#misc/amtu
[5]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/driver/sanity
[6]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/audit/audit-testsuite
[7]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/httpd/mod_ssl-smoke
[8]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/iotop/sanity
[9]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/tuned/tune-processes-through-perf
[10]: https://github.com/CKI-project/tests-beaker/archive/master.zip#standards/usex/1.9-29
[11]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/socket/fuzz
[12]: https://github.com/CKI-project/tests-beaker/archive/master.zip#networking/sctp/auth/sockopts
[13]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/route/pmtu
[14]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/route/route_func
[15]: https://github.com/CKI-project/tests-beaker/archive/master.zip#networking/udp/udp_socket
Waived tests (marked with 🚧)
-----------------------------
This test run included waived tests. Such tests are executed but their results
are not taken into account. Tests are waived when their results are not
reliable enough, e.g. when they're just introduced or are being fixed.
next reply other threads:[~2019-06-09 13:50 UTC|newest]
Thread overview: 102+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-09 13:50 CKI Project [this message]
-- strict thread matches above, loose matches on Subject: below --
2019-07-06 7:54 ✅ PASS: Stable queue: queue-5.1 CKI Project
2019-07-06 7:34 CKI Project
2019-07-05 17:32 CKI Project
2019-07-05 13:41 CKI Project
2019-07-05 11:53 CKI Project
2019-07-02 11:40 CKI Project
2019-07-02 11:35 CKI Project
2019-07-02 11:29 CKI Project
2019-07-02 10:37 CKI Project
2019-07-01 18:42 CKI Project
2019-07-01 18:04 CKI Project
2019-07-01 16:27 CKI Project
2019-06-28 21:37 CKI Project
2019-06-27 13:54 CKI Project
2019-06-27 2:40 CKI Project
2019-06-27 2:34 CKI Project
2019-06-27 2:30 CKI Project
2019-06-26 10:57 CKI Project
2019-06-26 10:26 CKI Project
2019-06-26 5:19 CKI Project
2019-06-26 3:04 CKI Project
2019-06-25 4:56 CKI Project
2019-06-24 23:06 CKI Project
2019-06-24 18:23 CKI Project
2019-06-24 11:51 CKI Project
2019-06-24 11:44 CKI Project
2019-06-24 8:55 CKI Project
2019-06-24 5:08 CKI Project
2019-06-24 1:46 CKI Project
2019-06-23 16:54 CKI Project
2019-06-23 14:02 CKI Project
2019-06-23 6:31 CKI Project
2019-06-23 3:38 CKI Project
2019-06-22 17:40 CKI Project
2019-06-22 17:38 CKI Project
2019-06-22 17:09 CKI Project
2019-06-22 9:34 CKI Project
2019-06-22 8:56 CKI Project
2019-06-20 8:56 CKI Project
2019-06-20 8:50 CKI Project
2019-06-19 19:28 CKI Project
2019-06-19 16:10 CKI Project
2019-06-17 20:33 CKI Project
2019-06-16 8:21 CKI Project
2019-06-14 5:00 CKI Project
2019-06-14 3:56 CKI Project
2019-06-14 2:22 CKI Project
2019-06-14 1:39 CKI Project
2019-06-14 1:37 CKI Project
2019-06-13 20:36 CKI Project
2019-06-13 9:35 CKI Project
2019-06-12 3:11 CKI Project
2019-06-11 22:32 CKI Project
2019-06-11 21:19 CKI Project
2019-06-10 8:38 CKI Project
2019-06-09 13:10 CKI Project
2019-06-09 10:02 CKI Project
2019-06-06 19:15 CKI Project
2019-06-06 8:05 CKI Project
2019-06-04 16:06 CKI Project
2019-06-04 15:55 CKI Project
2019-06-04 14:22 CKI Project
2019-06-04 12:33 CKI Project
2019-06-04 12:22 CKI Project
2019-06-04 12:09 CKI Project
2019-06-04 12:00 CKI Project
2019-06-03 12:59 CKI Project
2019-06-03 11:18 CKI Project
2019-06-01 3:12 CKI Project
2019-06-01 1:00 CKI Project
2019-05-30 3:13 CKI Project
2019-05-29 21:45 CKI Project
2019-05-29 1:26 CKI Project
2019-05-28 20:03 CKI Project
2019-05-28 15:52 CKI Project
2019-05-27 16:44 CKI Project
2019-05-27 16:26 CKI Project
2019-05-27 13:26 CKI Project
2019-05-27 12:41 CKI Project
2019-05-24 20:27 CKI Project
2019-05-23 22:36 CKI Project
2019-05-23 17:00 CKI Project
2019-05-23 15:17 CKI Project
2019-05-23 14:15 CKI Project
2019-05-22 11:00 CKI Project
2019-05-21 21:11 CKI Project
2019-05-20 14:04 CKI Project
2019-05-18 8:58 CKI Project
2019-05-17 18:12 CKI Project
2019-05-17 15:31 CKI Project
2019-05-17 5:27 CKI Project
2019-05-15 17:46 CKI Project
2019-05-15 10:57 CKI Project
2019-05-15 8:08 CKI Project
2019-05-14 20:34 CKI Project
2019-05-14 12:33 CKI Project
2019-05-13 13:42 CKI Project
2019-05-13 9:55 CKI Project
2019-05-09 20:21 CKI Project
2019-05-09 19:20 CKI Project
2019-05-09 15:37 CKI Project
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cki.39B7925324.MO2EGDUY57@redhat.com \
--to=cki-project@redhat.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).