From: CKI Project <cki-project@redhat.com>
To: Linux Stable maillist <stable@vger.kernel.org>
Subject: ❌ FAIL: Stable queue: queue-5.2
Date: Sun, 18 Aug 2019 10:27:24 -0400 [thread overview]
Message-ID: <cki.63E670325B.BC3Y8LFEEL@redhat.com> (raw)
Hello,
We ran automated tests on a patchset that was proposed for merging into this
kernel tree. The patches were applied to:
Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Commit: aad39e30fb9e - Linux 5.2.9
The results of these automated tests are provided below.
Overall result: FAILED (see details below)
Merge: OK
Compile: OK
Tests: FAILED
All kernel binaries, config files, and logs are available for download here:
https://artifacts.cki-project.org/pipelines/108662
One or more kernel tests failed:
aarch64:
❌ Boot test
ppc64le:
❌ Boot test
❌ Boot test
x86_64:
❌ Boot test
❌ Boot test
We hope that these logs can help you find the problem quickly. For the full
detail on our testing procedures, please scroll to the bottom of this message.
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Merge testing
-------------
We cloned this repository and checked out the following commit:
Repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Commit: aad39e30fb9e - Linux 5.2.9
We grabbed the 5680205d56e7 commit of the stable queue repository.
We then merged the patchset with `git am`:
keys-trusted-allow-module-init-if-tpm-is-inactive-or-deactivated.patch
sh-kernel-hw_breakpoint-fix-missing-break-in-switch-statement.patch
seq_file-fix-problem-when-seeking-mid-record.patch
mm-hmm-fix-bad-subpage-pointer-in-try_to_unmap_one.patch
mm-mempolicy-make-the-behavior-consistent-when-mpol_mf_move-and-mpol_mf_strict-were-specified.patch
mm-mempolicy-handle-vma-with-unmovable-pages-mapped-correctly-in-mbind.patch
mm-z3fold.c-fix-z3fold_destroy_pool-ordering.patch
mm-z3fold.c-fix-z3fold_destroy_pool-race-condition.patch
mm-memcontrol.c-fix-use-after-free-in-mem_cgroup_iter.patch
mm-usercopy-use-memory-range-to-be-accessed-for-wraparound-check.patch
mm-vmscan-do-not-special-case-slab-reclaim-when-watermarks-are-boosted.patch
cpufreq-schedutil-don-t-skip-freq-update-when-limits-change.patch
drm-amdgpu-fix-gfx9-soft-recovery.patch
drm-nouveau-only-recalculate-pbn-vcpi-on-mode-connector-changes.patch
xtensa-add-missing-isync-to-the-cpu_reset-tlb-code.patch
arm64-ftrace-ensure-module-ftrace-trampoline-is-coherent-with-i-side.patch
alsa-hda-realtek-add-quirk-for-hp-envy-x360.patch
alsa-usb-audio-fix-a-stack-buffer-overflow-bug-in-check_input_term.patch
alsa-usb-audio-fix-an-oob-bug-in-parse_audio_mixer_unit.patch
alsa-hda-apply-workaround-for-another-amd-chip-1022-1487.patch
alsa-hda-fix-a-memory-leak-bug.patch
alsa-hda-add-a-generic-reboot_notify.patch
alsa-hda-let-all-conexant-codec-enter-d3-when-rebooting.patch
hid-holtek-test-for-sanity-of-intfdata.patch
hid-hiddev-avoid-opening-a-disconnected-device.patch
hid-hiddev-do-cleanup-in-failure-of-opening-a-device.patch
input-kbtab-sanity-check-for-endpoint-type.patch
input-iforce-add-sanity-checks.patch
net-usb-pegasus-fix-improper-read-if-get_registers-fail.patch
bpf-fix-access-to-skb_shared_info-gso_segs.patch
netfilter-ebtables-also-count-base-chain-policies.patch
rdma-hns-fix-sg-offset-non-zero-issue.patch
ib-mlx5-replace-kfree-with-kvfree.patch
clk-at91-generated-truncate-divisor-to-generated_max.patch
clk-sprd-select-regmap_mmio-to-avoid-compile-errors.patch
clk-renesas-cpg-mssr-fix-reset-control-race-conditio.patch
dma-mapping-check-pfn-validity-in-dma_common_-mmap-g.patch
platform-x86-pcengines-apuv2-fix-softdep-statement.patch
platform-x86-intel_pmc_core-add-icl-nnpi-support-to-.patch
mm-hmm-always-return-ebusy-for-invalid-ranges-in-hmm.patch
xen-pciback-remove-set-but-not-used-variable-old_sta.patch
irqchip-gic-v3-its-free-unused-vpt_page-when-alloc-v.patch
irqchip-irq-imx-gpcv2-forward-irq-type-to-parent.patch
f2fs-fix-to-read-source-block-before-invalidating-it.patch
tools-perf-beauty-fix-usbdevfs_ioctl-table-generator.patch
perf-header-fix-divide-by-zero-error-if-f_header.att.patch
perf-header-fix-use-of-unitialized-value-warning.patch
rdma-qedr-fix-the-hca_type-and-hca_rev-returned-in-d.patch
alsa-pcm-fix-lost-wakeup-event-scenarios-in-snd_pcm_.patch
libata-zpodd-fix-small-read-overflow-in-zpodd_get_me.patch
powerpc-nvdimm-pick-nearby-online-node-if-the-device.patch
drm-bridge-lvds-encoder-fix-build-error-while-config.patch
drm-bridge-tc358764-fix-build-error.patch
btrfs-fix-deadlock-between-fiemap-and-transaction-co.patch
scsi-hpsa-correct-scsi-command-status-issue-after-re.patch
scsi-qla2xxx-fix-possible-fcport-null-pointer-derefe.patch
exit-make-setting-exit_state-consistent.patch
tracing-fix-header-include-guards-in-trace-event-hea.patch
drm-amdkfd-fix-byte-align-on-vegam.patch
drm-amd-powerplay-fix-null-pointer-dereference-aroun.patch
drm-amdgpu-fix-error-handling-in-amdgpu_cs_process_f.patch
drm-amdgpu-fix-a-potential-information-leaking-bug.patch
ata-libahci-do-not-complain-in-case-of-deferred-prob.patch
kbuild-modpost-handle-kbuild_extra_symbols-only-for-.patch
kbuild-check-for-unknown-options-with-cc-option-usag.patch
arm64-efi-fix-variable-si-set-but-not-used.patch
riscv-fix-perf-record-without-libelf-support.patch
arm64-lower-priority-mask-for-gic_prio_irqon.patch
arm64-unwind-prohibit-probing-on-return_address.patch
arm64-mm-fix-variable-pud-set-but-not-used.patch
arm64-mm-fix-variable-tag-set-but-not-used.patch
ib-core-add-mitigation-for-spectre-v1.patch
ib-mlx5-fix-mr-registration-flow-to-use-umr-properly.patch
rdma-restrack-track-driver-qp-types-in-resource-trac.patch
ib-mad-fix-use-after-free-in-ib-mad-completion-handl.patch
rdma-mlx5-release-locks-during-notifier-unregister.patch
drm-msm-fix-add_gpu_components.patch
rdma-hns-fix-error-return-code-in-hns_roce_v1_rsv_lp.patch
drm-exynos-fix-missing-decrement-of-retry-counter.patch
arm64-kprobes-recover-pstate.d-in-single-step-except.patch
arm64-make-debug-exception-handlers-visible-from-rcu.patch
revert-kmemleak-allow-to-coexist-with-fault-injectio.patch
ocfs2-remove-set-but-not-used-variable-last_hash.patch
page-flags-prioritize-kasan-bits-over-last-cpuid.patch
asm-generic-fix-wtype-limits-compiler-warnings.patch
tpm-tpm_ibm_vtpm-fix-unallocated-banks.patch
Compile testing
---------------
We compiled the kernel for 3 architectures:
aarch64:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg
ppc64le:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg
x86_64:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
❌ Boot test [0]
⚡⚡⚡ xfstests: xfs [1]
⚡⚡⚡ selinux-policy: serge-testsuite [2]
ppc64le:
Host 1:
❌ Boot test [0]
⚡⚡⚡ xfstests: xfs [1]
⚡⚡⚡ selinux-policy: serge-testsuite [2]
Host 2:
❌ Boot test [0]
⚡⚡⚡ Podman system integration test (as root) [3]
⚡⚡⚡ Podman system integration test (as user) [3]
⚡⚡⚡ LTP lite [4]
⚡⚡⚡ Loopdev Sanity [5]
⚡⚡⚡ jvm test suite [6]
⚡⚡⚡ AMTU (Abstract Machine Test Utility) [7]
⚡⚡⚡ LTP: openposix test suite [8]
⚡⚡⚡ Networking socket: fuzz [9]
⚡⚡⚡ audit: audit testsuite test [10]
⚡⚡⚡ httpd: mod_ssl smoke sanity [11]
⚡⚡⚡ iotop: sanity [12]
⚡⚡⚡ tuned: tune-processes-through-perf [13]
⚡⚡⚡ Usex - version 1.9-29 [14]
x86_64:
Host 1:
❌ Boot test [0]
⚡⚡⚡ Podman system integration test (as root) [3]
⚡⚡⚡ Podman system integration test (as user) [3]
⚡⚡⚡ LTP lite [4]
⚡⚡⚡ Loopdev Sanity [5]
⚡⚡⚡ jvm test suite [6]
⚡⚡⚡ AMTU (Abstract Machine Test Utility) [7]
⚡⚡⚡ LTP: openposix test suite [8]
⚡⚡⚡ Networking socket: fuzz [9]
⚡⚡⚡ audit: audit testsuite test [10]
⚡⚡⚡ httpd: mod_ssl smoke sanity [11]
⚡⚡⚡ iotop: sanity [12]
⚡⚡⚡ tuned: tune-processes-through-perf [13]
⚡⚡⚡ pciutils: sanity smoke test [15]
⚡⚡⚡ Usex - version 1.9-29 [14]
⚡⚡⚡ storage: SCSI VPD [16]
⚡⚡⚡ stress: stress-ng [17]
Host 2:
❌ Boot test [0]
⚡⚡⚡ xfstests: xfs [1]
⚡⚡⚡ selinux-policy: serge-testsuite [2]
Test source:
💚 Pull requests are welcome for new tests or improvements to existing tests!
[0]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution/kpkginstall
[1]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/filesystems/xfs/xfstests
[2]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/packages/selinux-policy/serge-testsuite
[3]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/container/podman
[4]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution/ltp/lite
[5]: https://github.com/CKI-project/tests-beaker/archive/master.zip#filesystems/loopdev/sanity
[6]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/jvm
[7]: https://github.com/CKI-project/tests-beaker/archive/master.zip#misc/amtu
[8]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution/ltp/openposix_testsuite
[9]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/socket/fuzz
[10]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/audit/audit-testsuite
[11]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/httpd/mod_ssl-smoke
[12]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/iotop/sanity
[13]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/tuned/tune-processes-through-perf
[14]: https://github.com/CKI-project/tests-beaker/archive/master.zip#standards/usex/1.9-29
[15]: https://github.com/CKI-project/tests-beaker/archive/master.zip#pciutils/sanity-smoke
[16]: https://github.com/CKI-project/tests-beaker/archive/master.zip#storage/scsi/vpd
[17]: https://github.com/CKI-project/tests-beaker/archive/master.zip#stress/stress-ng
Waived tests
------------
If the test run included waived tests, they are marked with 🚧. Such tests are
executed but their results are not taken into account. Tests are waived when
their results are not reliable enough, e.g. when they're just introduced or are
being fixed.
next reply other threads:[~2019-08-18 14:27 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-18 14:27 CKI Project [this message]
-- strict thread matches above, loose matches on Subject: below --
2019-09-19 12:42 ❌ FAIL: Stable queue: queue-5.2 CKI Project
2019-09-19 12:57 ` Greg KH
2019-09-07 11:48 CKI Project
2019-09-04 5:31 CKI Project
2019-09-04 21:40 ` Rachel Sibley
2019-08-30 23:41 CKI Project
2019-08-28 12:36 CKI Project
2019-09-10 8:19 ` Hangbin Liu
2019-09-10 8:58 ` Greg KH
2019-09-10 9:30 ` Hangbin Liu
2019-09-10 9:40 ` Hangbin Liu
2019-09-10 10:52 ` Sasha Levin
2019-08-27 10:54 CKI Project
2019-08-26 22:06 CKI Project
2019-08-27 14:58 ` Rachel Sibley
2019-08-26 20:33 CKI Project
2019-08-26 21:00 ` Major Hayden
2019-08-25 14:37 CKI Project
2019-08-25 14:41 ` Greg KH
2019-08-26 8:23 ` Nikolai Kondrashov
2019-08-26 8:33 ` Greg KH
2019-08-26 9:13 ` Nikolai Kondrashov
2019-08-26 9:40 ` Nikolai Kondrashov
2019-08-26 11:12 ` Nikolai Kondrashov
2019-08-26 11:39 ` Nikolai Kondrashov
2019-08-26 13:33 ` Sasha Levin
2019-08-27 13:10 ` Nikolai Kondrashov
2019-08-22 22:48 CKI Project
2019-08-22 23:37 ` Greg KH
2019-08-23 6:57 ` Jan Stancek
2019-08-23 15:38 ` Sasha Levin
2019-08-23 2:19 ` ? " Murphy Zhou
2019-08-18 21:09 ❌ " CKI Project
2019-08-18 14:05 CKI Project
2019-08-18 14:20 ` Greg KH
2019-08-18 12:00 CKI Project
2019-08-18 16:59 ` Ondrej Mosnacek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cki.63E670325B.BC3Y8LFEEL@redhat.com \
--to=cki-project@redhat.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).