From: Michal Simek <michal.simek@xilinx.com>
To: u-boot@lists.denx.de, git@xilinx.com
Subject: [PATCH 2/6] arm64: zynqmp: Add maximum-speed property for dwc3 nodes
Date: Thu, 3 Jun 2021 10:11:25 +0200 [thread overview]
Message-ID: <7e34e8a830d66b9c9ae9561692afede09f76af22.1622707885.git.michal.simek@xilinx.com> (raw)
In-Reply-To: <cover.1622707885.git.michal.simek@xilinx.com>
dwc3 can be used only for higher speeds than super-speed that's why
explicitly set it up.
This is also aligned with other ZynqMP dts files.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts | 1 +
arch/arm/dts/zynqmp-zcu106-revA.dts | 1 +
arch/arm/dts/zynqmp-zcu111-revA.dts | 1 +
arch/arm/dts/zynqmp-zcu208-revA.dts | 1 +
arch/arm/dts/zynqmp-zcu216-revA.dts | 1 +
5 files changed, 5 insertions(+)
diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
index 0c6a2a92dfe5..b0506c08418e 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
@@ -433,6 +433,7 @@
snps,usb3_lpm_capable;
phy-names = "usb3-phy";
phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+ maximum-speed = "super-speed";
};
&zynqmp_dpdma {
diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts
index 4da7a3edf548..d7140fc950ee 100644
--- a/arch/arm/dts/zynqmp-zcu106-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu106-revA.dts
@@ -1040,6 +1040,7 @@
snps,usb3_lpm_capable;
phy-names = "usb3-phy";
phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+ maximum-speed = "super-speed";
};
&watchdog0 {
diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts
index 85821065dd43..223bb8a61462 100644
--- a/arch/arm/dts/zynqmp-zcu111-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu111-revA.dts
@@ -861,6 +861,7 @@
snps,usb3_lpm_capable;
phy-names = "usb3-phy";
phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+ maximum-speed = "super-speed";
};
&zynqmp_dpdma {
diff --git a/arch/arm/dts/zynqmp-zcu208-revA.dts b/arch/arm/dts/zynqmp-zcu208-revA.dts
index 03c84ae21acb..7607098ac077 100644
--- a/arch/arm/dts/zynqmp-zcu208-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu208-revA.dts
@@ -701,4 +701,5 @@
snps,usb3_lpm_capable;
phy-names = "usb3-phy";
phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+ maximum-speed = "super-speed";
};
diff --git a/arch/arm/dts/zynqmp-zcu216-revA.dts b/arch/arm/dts/zynqmp-zcu216-revA.dts
index fd1d9bfbd199..7ba60da131f1 100644
--- a/arch/arm/dts/zynqmp-zcu216-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu216-revA.dts
@@ -705,4 +705,5 @@
snps,usb3_lpm_capable;
phy-names = "usb3-phy";
phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+ maximum-speed = "super-speed";
};
--
2.31.1
next prev parent reply other threads:[~2021-06-03 8:12 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-03 8:11 [PATCH 0/6] arm64: zynqmp: DT syncup patches Michal Simek
2021-06-03 8:11 ` [PATCH 1/6] arm64: zynqmp: Remove additional header from zc1232 DT Michal Simek
2021-06-03 8:11 ` Michal Simek [this message]
2021-06-03 8:11 ` [PATCH 3/6] arm64: zynqmp: Remove addition newline from zc1751 dc1 Michal Simek
2021-06-03 8:11 ` [PATCH 4/6] arm64: zynqmp: Remove unused dp_aclk clock Michal Simek
2021-06-03 8:11 ` [PATCH 5/6] arm64: zynqmp: Sync dp port location on zc1751 dc4 Michal Simek
2021-06-03 8:11 ` [PATCH 6/6] arm64: zynqmp: Sync psgtr location on zcu100/zcu106 Michal Simek
2021-06-14 8:01 ` [PATCH 0/6] arm64: zynqmp: DT syncup patches Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7e34e8a830d66b9c9ae9561692afede09f76af22.1622707885.git.michal.simek@xilinx.com \
--to=michal.simek@xilinx.com \
--cc=git@xilinx.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).