mx6cuboxi: failes to detect model

From: Christian Gmeiner <christian.gmeiner@gmail.com>
To: U-Boot Mailing List <u-boot@lists.denx.de>
Cc: jonas@kwiboo.se, Fabio Estevam <festevam@gmail.com>,
	josua@solid-run.com,  Simon Glass <sjg@chromium.org>
Subject: mx6cuboxi: failes to detect model
Date: Tue, 26 Mar 2024 16:17:45 +0100	[thread overview]
Message-ID: <CAH9NwWe1qEo5r0UmdRh9CqFxmJYfHRU1YxoW8b8vTQwDB-227A@mail.gmail.com> (raw)

I am seeing model detection problems with the current git master.

U-Boot 2024.04-rc5 (Mar 26 2024 - 15:59:22 +0100)

CPU:   Freescale i.MX6Q rev1.3 996 MHz (running at 792 MHz)
CPU:   Extended Commercial temperature grade (-20C to 105C) at 26C
Reset cause: POR
Model: SolidRun HummingBoard2 Dual/Quad (1.5som+emmc)
gpio@20a4000: set_dir_flags: error: gpio GPIO3_8 not reserved
gpio@20a4000: get_value: error: gpio GPIO3_8 not reserved
gpio@20a8000: set_dir_flags: error: gpio GPIO4_4 not reserved
gpio@20a8000: get_value: error: gpio GPIO4_4 not reserved
gpio@20b0000: set_dir_flags: error: gpio GPIO6_9 not reserved
gpio@20b0000: get_value: error: gpio GPIO6_9 not reserved
Board: MX6 HummingBoard
DRAM:  2 GiB
Core:  82 devices, 17 uclasses, devicetree: fit
MMC:   FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   eth0: ethernet@2188000

I did a git bisect to find the commit that broke model detection:

# good: [4459ed60cb1e0562bc5b40405e2b4b9bbf766d57] Prepare v2023.10
git bisect good 4459ed60cb1e0562bc5b40405e2b4b9bbf766d57
# bad: [873791433602281ed230486606e326983c97a285] Merge
https://source.denx.de/u-boot/custodians/u-boot-riscv
git bisect bad 873791433602281ed230486606e326983c97a285
# bad: [6e0a75d3162a024cb0cdedd871d435e6ee782447] configs: Resync with
savedefconfig
git bisect bad 6e0a75d3162a024cb0cdedd871d435e6ee782447
# good: [99b46477e3495f819f6826d11470d46f12a4f9f7] clk: Dont return
error when assigned-clocks is empty or missing
git bisect good 99b46477e3495f819f6826d11470d46f12a4f9f7
# bad: [50fa67d091b6ffbc1d77d3100d7b31795bf64928] arm: mach-k3:
j721e_init: Move clk_k3 probe before loading TIFS
git bisect bad 50fa67d091b6ffbc1d77d3100d7b31795bf64928
# bad: [827cece3aa550d41e9c08c640b3a73372c8fb14a] pinctrl: renesas:
Synchronize R8A77980 V3H PFC tables with Linux 6.5.3
git bisect bad 827cece3aa550d41e9c08c640b3a73372c8fb14a
# good: [623b3e8f9718a1fbd612b3e42451859e9f98a947] x86: spl: Change
the condition for copying U-Boot to RAM
git bisect good 623b3e8f9718a1fbd612b3e42451859e9f98a947
# good: [ad57b98e212bd15492398cea3a8d4df6297e16fd] x86: doc: Split out
manual booting into its own file
git bisect good ad57b98e212bd15492398cea3a8d4df6297e16fd
# bad: [6d53b50888315252cdd3251551add7a9108a1300] ARM: renesas: Enable
DM_ETH_PHY on 64-bit R-Car boards
git bisect bad 6d53b50888315252cdd3251551add7a9108a1300
# bad: [283dcb63cb7d124fa427938f39aa9362872e02fc] buildman: Show
progress when regenerating the board.cfg file
git bisect bad 283dcb63cb7d124fa427938f39aa9362872e02fc
# bad: [9e644284ab812f2db23f6185af77c0e771b0be73] dm: core: Report
bootph-pre-ram/sram node as pre-reloc after relocation
git bisect bad 9e644284ab812f2db23f6185af77c0e771b0be73
# good: [b05a184379631d13c4a49e423aa1324dc1ae6158] Merge tag
'x86-pull-20230922' of
https://source.denx.de/u-boot/custodians/u-boot-x86 into next
git bisect good b05a184379631d13c4a49e423aa1324dc1ae6158
# first bad commit: [9e644284ab812f2db23f6185af77c0e771b0be73] dm:
core: Report bootph-pre-ram/sram node as pre-reloc after relocation

If I revert 9e644284ab812f2db23f6185af77c0e771b0be73 on top of git
master everything is fine again. As I am not an export in that area I
am seeking
some directions on how to fix this issue.

-- 
greets
--
Christian Gmeiner, MSc

https://christian-gmeiner.info/privacypolicy