From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: Please pull u-boot-marvell/master
Date: Thu, 13 May 2021 12:21:38 +0200 [thread overview]
Message-ID: <e9e253b1-9a7b-d648-8459-45cee65ef204@denx.de> (raw)
Hi Tom,
please pull the next batch of Marvell Armada related patches. Here the
summary log:
----------------------------------------------------------------
- Add base support for Marvell OcteonTX2 CN9130 DB (mostly done
by Kostya)
- Sync Armada mvpp2 ethernet driver with Marvell version (misc Marvell
authors)
- Sync Armada 8k MMU setup with Marvell version (misc Marvell
authors)
- spi: kirkwood: Some fixes especially for baudrate generation
(misc Marvell authors)
- mvebu: x530: Reduce SPL image size (Stefan)
- Rename "rx_training" to "mvebu_comphy_rx_training" (Stefan)
----------------------------------------------------------------
Here the Azure build:
https://dev.azure.com/sr0718/u-boot/_build/results?buildId=87&view=results
It shows some issues with xilinx_versal_virt, which seem to be not
related to this patch set and also occurred yesterday.
Thanks,
Stefan
The following changes since commit ea184cbff99ea1d82dcf94c95afe054e95da5069:
Merge tag 'ti-v2021.07-rc3' of
https://source.denx.de/u-boot/custodians/u-boot-ti (2021-05-12 10:07:21
-0400)
are available in the Git repository at:
git at source.denx.de:u-boot/custodians/u-boot-marvell.git
for you to fetch changes up to e0a6df9efa69bfe662def66d12b8702ad1cf3a51:
arm: octeontx2: Add Octeon TX2 CN913x DB support (2021-05-13 08:18:19
+0200)
----------------------------------------------------------------
Ben Peled (3):
net: mvpp2: AN Bypass in 1000 and 2500 basex mode
net: mvpp2: remove unused define MVPP22_SMI_PHY_ADDR_REG
net: mvpp2: fix missing switch case break
Grzegorz Jaszczyk (4):
spi: kirkwood: prevent limiting speed to 0
arm64: mvebu: do not map firmware RT service region
arm64: mvebu: a8k: move firmware related definitions to fw info
arm64: mvebu: extend the mmio region
Ken Ma (1):
spi: kirkwood: support extended baud rates
Konstantin Porotchkin (2):
arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN913x DB
arm: octeontx2: Add Octeon TX2 CN913x DB support
Marcin Wojtas (4):
net: mvpp2: remove redundant SMI address configuration
net: mvpp2: add explicit sgmii-2500 support
spi: kirkwood: prevent configuring speed exceeding max controller
freq
pcie: designware: mvebu: do not configure ATU for IO when not used
Stefan Chulski (5):
phy: introduce 1000BaseX and 2500BaseX modes
net: mvpp2: add CP115 port1 10G/5G SFI support
net: mvpp2: add 1000BaseX and 2500BaseX ppv2 support
net: mvpp2: Fix 2.5G GMII_SPEED configurations
net: mvpp2: allow MDIO registration for fixed links
Stefan Roese (2):
mvebu: x530: Reduce SPL image size
cmd: mvebu: Rename rx_training to mvebu_comphy_rx_training
jinghua (1):
arm64: mvebu: a8k: align memory regions
arch/arm/dts/Makefile | 6 +
arch/arm/dts/cn9130-db-A.dts | 55 ++++
arch/arm/dts/cn9130-db-B.dts | 51 ++++
arch/arm/dts/cn9130-db-dev-info.dtsi | 44 +++
arch/arm/dts/cn9130-db.dtsi | 316
++++++++++++++++++++++
arch/arm/dts/cn9131-db-A.dts | 54 ++++
arch/arm/dts/cn9131-db-B.dts | 69 +++++
arch/arm/dts/cn9131-db.dtsi | 166 ++++++++++++
arch/arm/dts/cn9132-db-A.dts | 13 +
arch/arm/dts/cn9132-db-B.dts | 13 +
arch/arm/dts/cn9132-db.dtsi | 217 +++++++++++++++
arch/arm/mach-mvebu/armada8k/cpu.c | 70 ++---
arch/arm/mach-mvebu/include/mach/fw_info.h | 18 ++
board/Marvell/octeontx2_cn913x/MAINTAINERS | 1 +
board/Marvell/octeontx2_cn913x/README | 24 ++
cmd/mvebu/Kconfig | 9 +-
cmd/mvebu/Makefile | 2 +-
cmd/mvebu/{rx_training.c => comphy_rx_training.c} | 10 +-
configs/mvebu_db_cn9130_defconfig | 89 ++++++
configs/x530_defconfig | 2 +-
drivers/net/mvpp2.c | 257 +++++++++++-------
drivers/pci/pcie_dw_mvebu.c | 37 ++-
drivers/spi/kirkwood_spi.c | 67 ++++-
include/phy_interface.h | 4 +
24 files changed, 1413 insertions(+), 181 deletions(-)
create mode 100644 arch/arm/dts/cn9130-db-A.dts
create mode 100644 arch/arm/dts/cn9130-db-B.dts
create mode 100644 arch/arm/dts/cn9130-db-dev-info.dtsi
create mode 100644 arch/arm/dts/cn9130-db.dtsi
create mode 100644 arch/arm/dts/cn9131-db-A.dts
create mode 100644 arch/arm/dts/cn9131-db-B.dts
create mode 100644 arch/arm/dts/cn9131-db.dtsi
create mode 100644 arch/arm/dts/cn9132-db-A.dts
create mode 100644 arch/arm/dts/cn9132-db-B.dts
create mode 100644 arch/arm/dts/cn9132-db.dtsi
create mode 100644 arch/arm/mach-mvebu/include/mach/fw_info.h
create mode 100644 board/Marvell/octeontx2_cn913x/README
rename cmd/mvebu/{rx_training.c => comphy_rx_training.c} (74%)
create mode 100644 configs/mvebu_db_cn9130_defconfig
next reply other threads:[~2021-05-13 10:21 UTC|newest]
Thread overview: 190+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-13 10:21 Stefan Roese [this message]
2021-05-13 15:37 ` Please pull u-boot-marvell/master Tom Rini
2021-05-15 8:03 ` Stefan Roese
2021-05-15 12:07 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2024-04-04 12:08 Stefan Roese
2024-04-06 0:42 ` Tom Rini
2024-03-05 10:35 Stefan Roese
2024-03-05 13:27 ` Tom Rini
2024-01-22 15:46 Stefan Roese
2024-01-22 16:00 ` Tom Rini
2024-01-10 14:47 Stefan Roese
2024-01-10 15:46 ` Tom Rini
2023-10-27 6:51 Stefan Roese
2023-10-28 0:50 ` Tom Rini
2023-10-20 12:51 Stefan Roese
2023-10-20 14:45 ` Tom Rini
2023-10-20 16:44 ` Stefan Roese
2023-10-20 16:54 ` Tom Rini
2023-10-20 16:55 ` Tom Rini
2023-10-16 14:50 Stefan Roese
2023-10-16 21:32 ` Tom Rini
2023-08-01 9:17 Stefan Roese
2023-08-01 15:57 ` Tom Rini
2023-07-13 14:03 Stefan Roese
2023-07-14 16:04 ` Tom Rini
2023-05-08 8:47 Stefan Roese
2023-05-08 17:39 ` Tom Rini
2023-05-03 9:18 Stefan Roese
2023-05-03 17:14 ` Tom Rini
2023-04-14 6:09 Stefan Roese
2023-04-15 5:07 ` Tom Rini
2023-03-06 11:52 Stefan Roese
2023-03-06 20:12 ` Tom Rini
2023-02-13 14:01 Stefan Roese
2023-02-13 16:28 ` Tom Rini
2023-01-26 9:26 Stefan Roese
2023-01-26 17:08 ` Tom Rini
2023-01-17 11:49 Stefan Roese
2023-01-17 13:20 ` Tom Rini
2023-01-02 10:49 Stefan Roese
2023-01-02 14:36 ` Tom Rini
2022-12-12 8:57 Stefan Roese
2022-12-12 15:43 ` Tom Rini
2022-11-07 8:24 Stefan Roese
2022-11-07 15:13 ` Tom Rini
2022-10-06 10:47 Stefan Roese
2022-10-06 14:25 ` Tom Rini
2022-09-26 11:59 Stefan Roese
2022-09-26 14:00 ` Tom Rini
2022-09-18 12:00 Stefan Roese
2022-09-18 12:34 ` Tom Rini
2022-09-13 10:26 Stefan Roese
2022-09-13 13:49 ` Tom Rini
2022-08-23 15:09 Stefan Roese
2022-08-24 13:52 ` Tom Rini
2022-08-09 11:43 Stefan Roese
2022-08-09 16:33 ` Tom Rini
2022-07-29 12:05 Stefan Roese
2022-07-29 14:31 ` Tom Rini
2022-07-21 12:28 Stefan Roese
2022-07-21 17:40 ` Tom Rini
2022-05-17 7:57 Stefan Roese
2022-05-18 23:52 ` Tom Rini
2022-05-04 9:26 Stefan Roese
2022-05-04 15:41 ` Tom Rini
2022-05-02 15:53 Stefan Roese
2022-05-03 15:06 ` Tom Rini
2022-04-21 14:18 Stefan Roese
2022-04-21 18:24 ` Tom Rini
2022-03-24 16:42 Stefan Roese
2022-03-24 21:23 ` Tom Rini
2022-03-16 9:52 Stefan Roese
2022-03-16 14:48 ` Tom Rini
2022-03-14 15:23 Stefan Roese
2022-03-14 16:19 ` Tom Rini
2022-03-04 12:27 Stefan Roese
2022-03-04 18:12 ` Tom Rini
2022-02-17 15:46 Stefan Roese
2022-02-17 18:56 ` Tom Rini
2022-02-10 8:21 Stefan Roese
2022-02-10 14:01 ` Tom Rini
2022-01-31 11:37 Stefan Roese
2022-01-31 15:21 ` Tom Rini
2022-01-20 16:31 Stefan Roese
2022-01-20 18:48 ` Tom Rini
2022-01-14 15:42 Stefan Roese
2022-01-14 17:26 ` Tom Rini
2022-01-05 17:27 Stefan Roese
2022-01-05 19:24 ` Tom Rini
2021-12-15 10:58 Stefan Roese
2021-12-15 13:39 ` Tom Rini
2021-11-30 13:42 Stefan Roese
2021-11-30 16:54 ` Tom Rini
2021-11-10 13:52 Stefan Roese
2021-11-10 19:11 ` Tom Rini
2021-11-03 7:49 Stefan Roese
2021-11-03 14:44 ` Tom Rini
2021-10-28 10:50 Stefan Roese
2021-10-28 14:47 ` Tom Rini
2021-10-21 7:53 Stefan Roese
2021-10-21 14:16 ` Tom Rini
2021-10-08 9:23 Stefan Roese
2021-10-08 13:56 ` Tom Rini
2021-09-29 7:47 Stefan Roese
2021-09-29 22:28 ` Tom Rini
2021-09-27 10:58 Stefan Roese
2021-09-27 12:52 ` Tom Rini
2021-09-10 12:05 Stefan Roese
2021-09-10 17:57 ` Tom Rini
2021-09-01 9:24 Stefan Roese
2021-09-01 14:12 ` Tom Rini
2021-08-11 8:30 Stefan Roese
2021-08-11 15:50 ` Tom Rini
2021-07-31 10:04 Stefan Roese
2021-08-01 3:28 ` Tom Rini
2021-08-01 5:26 ` Stefan Roese
2021-08-01 10:46 ` Pali Rohár
2021-08-01 14:33 ` Tom Rini
2021-08-01 14:46 ` Pali Rohár
2021-07-19 12:37 Stefan Roese
2021-07-19 20:44 ` Tom Rini
2021-07-15 10:36 Stefan Roese
2021-07-15 18:48 ` Tom Rini
2021-07-09 5:19 Stefan Roese
2021-07-10 1:08 ` Tom Rini
2021-06-15 8:11 Stefan Roese
2021-06-16 3:16 ` Tom Rini
2021-06-10 7:55 Stefan Roese
2021-06-10 17:27 ` Tom Rini
2021-06-04 13:15 Stefan Roese
2021-06-05 3:09 ` Tom Rini
2021-05-20 13:39 Stefan Roese
2021-05-21 14:07 ` Tom Rini
2021-04-29 6:47 Stefan Roese
2021-04-29 15:30 ` Tom Rini
2021-04-08 8:57 Stefan Roese
2021-04-08 19:35 ` Tom Rini
2021-03-12 9:02 Stefan Roese
2021-03-12 15:17 ` Tom Rini
2021-02-26 11:14 Stefan Roese
2021-02-26 17:40 ` Tom Rini
2021-02-08 11:41 Stefan Roese
2021-02-08 20:42 ` Tom Rini
2021-01-27 16:02 Stefan Roese
2021-01-27 19:22 ` Tom Rini
2020-12-28 10:40 Stefan Roese
2020-12-28 15:31 ` Tom Rini
2020-12-07 11:18 Stefan Roese
2020-12-07 22:09 ` Tom Rini
2020-10-29 14:31 Stefan Roese
2020-10-30 18:46 ` Tom Rini
2020-10-16 13:40 Stefan Roese
2020-10-16 22:02 ` Tom Rini
2020-10-14 8:19 Stefan Roese
2020-10-15 0:03 ` Tom Rini
2020-10-01 12:41 Stefan Roese
2020-10-01 22:10 ` Tom Rini
2020-09-24 10:40 Stefan Roese
2020-09-25 16:54 ` Tom Rini
2020-09-04 14:04 Stefan Roese
2020-09-04 16:49 ` Tom Rini
2020-08-31 13:12 Stefan Roese
2020-08-31 16:50 ` Tom Rini
2020-08-25 13:20 Stefan Roese
2020-08-26 1:22 ` Tom Rini
2020-08-13 12:24 Stefan Roese
2020-08-13 14:51 ` Tom Rini
2020-08-06 14:33 Stefan Roese
2020-08-06 18:28 ` Tom Rini
2020-08-08 14:42 ` Tom Rini
2020-07-09 8:42 Stefan Roese
2020-07-09 13:54 ` Tom Rini
2020-05-27 7:09 Stefan Roese
2020-05-27 15:59 ` Tom Rini
2020-05-04 6:54 Stefan Roese
2020-05-04 17:54 ` Tom Rini
2020-04-22 14:48 Stefan Roese
2020-04-22 18:34 ` Tom Rini
2020-04-23 5:04 ` Stefan Roese
2020-04-23 14:17 ` Joel Johnson
2020-04-14 11:28 Stefan Roese
2020-04-14 23:25 ` Tom Rini
2020-01-21 13:03 Stefan Roese
2020-01-21 13:11 ` Tom Rini
2020-01-21 13:19 ` Stefan Roese
2020-01-21 13:31 ` Baruch Siach
2020-01-21 13:32 ` Tom Rini
2020-01-21 13:33 ` Stefan Roese
2020-01-16 14:34 Stefan Roese
2020-01-16 21:02 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e9e253b1-9a7b-d648-8459-45cee65ef204@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).