From: Wen Congyang <wency@cn.fujitsu.com>
To: xen devel <xen-devel@lists.xen.org>,
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>,
Andrew Cooper <andrew.cooper3@citrix.com>,
Ian Campbell <ian.campbell@citrix.com>,
Ian Jackson <ian.jackson@eu.citrix.com>,
Wei Liu <wei.liu2@citrix.com>
Cc: Lars Kurth <lars.kurth@citrix.com>,
Changlong Xie <xiecl.fnst@cn.fujitsu.com>,
Wen Congyang <wency@cn.fujitsu.com>,
Gui Jianfeng <guijianfeng@cn.fujitsu.com>,
Jiang Yunhong <yunhong.jiang@intel.com>,
Dong Eddie <eddie.dong@intel.com>,
Shriram Rajagopalan <rshriram@cs.ubc.ca>,
Yang Hongyang <hongyang.yang@easystack.cn>
Subject: [PATCH v10 26/31] COLO proxy: implement setup/teardown of COLO proxy module
Date: Mon, 22 Feb 2016 10:52:30 +0800 [thread overview]
Message-ID: <1456109555-28299-27-git-send-email-wency@cn.fujitsu.com> (raw)
In-Reply-To: <1456109555-28299-1-git-send-email-wency@cn.fujitsu.com>
setup/teardown of COLO proxy module.
we use netlink to communicate with proxy module.
About colo-proxy module:
https://lkml.org/lkml/2015/6/18/32
How to use:
http://wiki.xen.org/wiki/COLO_-_Coarse_Grain_Lock_Stepping
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
---
tools/libxl/Makefile | 1 +
tools/libxl/libxl_colo.h | 2 +
tools/libxl/libxl_colo_proxy.c | 230 +++++++++++++++++++++++++++++++++++++++++
tools/libxl/libxl_internal.h | 15 +++
4 files changed, 248 insertions(+)
create mode 100644 tools/libxl/libxl_colo_proxy.c
diff --git a/tools/libxl/Makefile b/tools/libxl/Makefile
index 28d54d0..6fea9e0 100644
--- a/tools/libxl/Makefile
+++ b/tools/libxl/Makefile
@@ -67,6 +67,7 @@ endif
LIBXL_OBJS-y += libxl_remus.o libxl_checkpoint_device.o libxl_remus_disk_drbd.o
LIBXL_OBJS-y += libxl_colo_restore.o libxl_colo_save.o
LIBXL_OBJS-y += libxl_colo_qdisk.o
+LIBXL_OBJS-y += libxl_colo_proxy.o
LIBXL_OBJS-$(CONFIG_X86) += libxl_cpuid.o libxl_x86.o libxl_psr.o
LIBXL_OBJS-$(CONFIG_ARM) += libxl_nocpuid.o libxl_arm.o libxl_libfdt_compat.o
diff --git a/tools/libxl/libxl_colo.h b/tools/libxl/libxl_colo.h
index b08f672..6d8cd4f 100644
--- a/tools/libxl/libxl_colo.h
+++ b/tools/libxl/libxl_colo.h
@@ -27,4 +27,6 @@ extern void libxl__colo_save_teardown(libxl__egc *egc,
libxl__colo_save_state *css,
int rc);
+extern int colo_proxy_setup(libxl__colo_proxy_state *cps);
+extern void colo_proxy_teardown(libxl__colo_proxy_state *cps);
#endif
diff --git a/tools/libxl/libxl_colo_proxy.c b/tools/libxl/libxl_colo_proxy.c
new file mode 100644
index 0000000..e07e640
--- /dev/null
+++ b/tools/libxl/libxl_colo_proxy.c
@@ -0,0 +1,230 @@
+/*
+ * Copyright (C) 2015 FUJITSU LIMITED
+ * Author: Yang Hongyang <hongyang.yang@easystack.cn>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; version 2.1 only. with the special
+ * exception on linking described in file LICENSE.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ */
+
+#include "libxl_osdeps.h" /* must come before any other headers */
+
+#include "libxl_internal.h"
+#include "libxl_colo.h"
+#include <linux/netlink.h>
+
+#define NETLINK_COLO 28
+
+enum colo_netlink_op {
+ COLO_QUERY_CHECKPOINT = (NLMSG_MIN_TYPE + 1),
+ COLO_CHECKPOINT,
+ COLO_FAILOVER,
+ COLO_PROXY_INIT,
+ COLO_PROXY_RESET, /* UNUSED, will be used for continuous FT */
+};
+
+/* ========= colo-proxy: helper functions ========== */
+
+static int colo_proxy_send(libxl__colo_proxy_state *cps, uint8_t *buff,
+ uint64_t size, int type)
+{
+ struct sockaddr_nl sa;
+ struct nlmsghdr msg;
+ struct iovec iov;
+ struct msghdr mh;
+ int ret;
+
+ STATE_AO_GC(cps->ao);
+
+ memset(&sa, 0, sizeof(sa));
+ sa.nl_family = AF_NETLINK;
+ sa.nl_pid = 0;
+ sa.nl_groups = 0;
+
+ msg.nlmsg_len = NLMSG_SPACE(0);
+ msg.nlmsg_flags = NLM_F_REQUEST;
+ if (type == COLO_PROXY_INIT) {
+ msg.nlmsg_flags |= NLM_F_ACK;
+ }
+ msg.nlmsg_seq = 0;
+ /* This is untrusty */
+ msg.nlmsg_pid = cps->index;
+ msg.nlmsg_type = type;
+
+ iov.iov_base = &msg;
+ iov.iov_len = msg.nlmsg_len;
+
+ mh.msg_name = &sa;
+ mh.msg_namelen = sizeof(sa);
+ mh.msg_iov = &iov;
+ mh.msg_iovlen = 1;
+ mh.msg_control = NULL;
+ mh.msg_controllen = 0;
+ mh.msg_flags = 0;
+
+ ret = sendmsg(cps->sock_fd, &mh, 0);
+ if (ret <= 0) {
+ LOG(ERROR, "can't send msg to kernel by netlink: %s",
+ strerror(errno));
+ }
+
+ return ret;
+}
+
+/* error: return -1, otherwise return 0 */
+static int64_t colo_proxy_recv(libxl__colo_proxy_state *cps, uint8_t **buff,
+ unsigned int timeout_us)
+{
+ struct sockaddr_nl sa;
+ struct iovec iov;
+ struct msghdr mh = {
+ .msg_name = &sa,
+ .msg_namelen = sizeof(sa),
+ .msg_iov = &iov,
+ .msg_iovlen = 1,
+ };
+ struct timeval tv;
+ uint32_t size = 16384;
+ int64_t len = 0;
+ int ret;
+
+ STATE_AO_GC(cps->ao);
+ uint8_t *tmp = libxl__malloc(NOGC, size);
+
+ if (timeout_us) {
+ tv.tv_sec = timeout_us / 1000000;
+ tv.tv_usec = timeout_us % 1000000;
+ setsockopt(cps->sock_fd, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv));
+ }
+
+ iov.iov_base = tmp;
+ iov.iov_len = size;
+next:
+ ret = recvmsg(cps->sock_fd, &mh, 0);
+ if (ret <= 0) {
+ if (errno != EAGAIN && errno != EWOULDBLOCK)
+ LOGE(ERROR, "can't recv msg from kernel by netlink");
+ goto err;
+ }
+
+ len += ret;
+ if (mh.msg_flags & MSG_TRUNC) {
+ size += 16384;
+ tmp = libxl__realloc(NOGC, tmp, size);
+ iov.iov_base = tmp + len;
+ iov.iov_len = size - len;
+ goto next;
+ }
+
+ *buff = tmp;
+ ret = len;
+ goto out;
+
+err:
+ free(tmp);
+ *buff = NULL;
+
+out:
+ if (timeout_us) {
+ tv.tv_sec = 0;
+ tv.tv_usec = 0;
+ setsockopt(cps->sock_fd, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv));
+ }
+ return ret;
+}
+
+/* ========= colo-proxy: setup and teardown ========== */
+
+int colo_proxy_setup(libxl__colo_proxy_state *cps)
+{
+ int skfd = 0;
+ struct sockaddr_nl sa;
+ struct nlmsghdr *h;
+ int i = 1;
+ int ret = ERROR_FAIL;
+ uint8_t *buff = NULL;
+ int64_t size;
+
+ STATE_AO_GC(cps->ao);
+
+ skfd = socket(PF_NETLINK, SOCK_RAW, NETLINK_COLO);
+ if (skfd < 0) {
+ LOG(ERROR, "can not create a netlink socket: %s", strerror(errno));
+ goto out;
+ }
+ cps->sock_fd = skfd;
+ memset(&sa, 0, sizeof(sa));
+ sa.nl_family = AF_NETLINK;
+ sa.nl_groups = 0;
+retry:
+ sa.nl_pid = i++;
+
+ if (i > 10) {
+ LOG(ERROR, "netlink bind error");
+ goto out;
+ }
+
+ ret = bind(skfd, (struct sockaddr *)&sa, sizeof(sa));
+ if (ret < 0 && errno == EADDRINUSE) {
+ LOG(ERROR, "colo index %d has already in used", sa.nl_pid);
+ goto retry;
+ } else if (ret < 0) {
+ LOG(ERROR, "netlink bind error");
+ goto out;
+ }
+
+ cps->index = sa.nl_pid;
+ ret = colo_proxy_send(cps, NULL, 0, COLO_PROXY_INIT);
+ if (ret < 0) {
+ goto out;
+ }
+ /* receive ack */
+ size = colo_proxy_recv(cps, &buff, 500000);
+ if (size < 0) {
+ LOG(ERROR, "Can't recv msg from kernel by netlink: %s",
+ strerror(errno));
+ goto out;
+ }
+
+ if (size) {
+ h = (struct nlmsghdr *)buff;
+ if (h->nlmsg_type == NLMSG_ERROR) {
+ /* ack's type is NLMSG_ERROR */
+ struct nlmsgerr *err = (struct nlmsgerr *)NLMSG_DATA(h);
+
+ if (size - sizeof(*h) < sizeof(*err)) {
+ LOG(ERROR, "NLMSG_LENGTH is too short");
+ goto out;
+ }
+
+ if (err->error) {
+ LOG(ERROR, "NLMSG_ERROR contains error %d", err->error);
+ goto out;
+ }
+ }
+ }
+
+ ret = 0;
+
+out:
+ free(buff);
+ if (ret) {
+ close(cps->sock_fd);
+ cps->sock_fd = -1;
+ }
+ return ret;
+}
+
+void colo_proxy_teardown(libxl__colo_proxy_state *cps)
+{
+ if (cps->sock_fd >= 0) {
+ close(cps->sock_fd);
+ cps->sock_fd = -1;
+ }
+}
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 3af5fdd..3b44b09 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -3112,6 +3112,15 @@ libxl__stream_read_inuse(const libxl__stream_read_state *stream)
}
/*----- colo related state structure -----*/
+typedef struct libxl__colo_proxy_state libxl__colo_proxy_state;
+struct libxl__colo_proxy_state {
+ /* set by caller of colo_proxy_setup */
+ libxl__ao *ao;
+
+ int sock_fd;
+ int index;
+};
+
typedef struct libxl__colo_save_state libxl__colo_save_state;
struct libxl__colo_save_state {
int send_fd;
@@ -3126,6 +3135,9 @@ struct libxl__colo_save_state {
/* private, used by qdisk block replication */
bool qdisk_used;
bool qdisk_setuped;
+
+ /* private, used by colo-proxy */
+ libxl__colo_proxy_state cps;
};
/*----- Domain suspend (save) state structure -----*/
@@ -3535,6 +3547,9 @@ struct libxl__colo_restore_state {
bool qdisk_setuped;
const char *host;
const char *port;
+
+ /* private, used by colo-proxy */
+ libxl__colo_proxy_state cps;
};
struct libxl__domain_create_state {
--
2.5.0
next prev parent reply other threads:[~2016-02-22 2:52 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-22 2:52 [PATCH v10 00/31] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Wen Congyang
2016-02-22 2:52 ` [PATCH v10 01/31] tools/libxl: introduce libxl__domain_restore_device_model to load qemu state Wen Congyang
2016-02-25 15:53 ` Wei Liu
2016-02-26 1:55 ` Wen Congyang
2016-02-22 2:52 ` [PATCH v10 02/31] tools/libxl: introduce libxl__domain_common_switch_qemu_logdirty() Wen Congyang
2016-02-22 2:52 ` [PATCH v10 03/31] tools/libxl: Add back channel to allow migration target send data back Wen Congyang
2016-02-22 2:52 ` [PATCH v10 04/31] tools/libxl: Introduce new helper function dup_fd_helper() Wen Congyang
2016-02-25 15:53 ` Wei Liu
2016-02-22 2:52 ` [PATCH v10 05/31] tools/libx{l, c}: add back channel to libxc Wen Congyang
2016-02-25 15:54 ` Wei Liu
2016-02-22 2:52 ` [PATCH v10 06/31] docs: add colo readme Wen Congyang
2016-02-25 15:54 ` Wei Liu
2016-02-22 2:52 ` [PATCH v10 07/31] docs/libxl: Introduce CHECKPOINT_CONTEXT to support migration v2 colo streams Wen Congyang
2016-02-25 15:54 ` Wei Liu
2016-02-26 1:59 ` Wen Congyang
2016-02-22 2:52 ` [PATCH v10 08/31] libxc/migration: Specification update for DIRTY_PFN_LIST records Wen Congyang
2016-02-22 2:52 ` [PATCH v10 09/31] libxc/migration: export read_record for common use Wen Congyang
2016-02-22 2:52 ` [PATCH v10 10/31] tools/libxl: add back channel support to write stream Wen Congyang
2016-02-25 15:54 ` Wei Liu
2016-02-26 2:11 ` Wen Congyang
2016-03-02 15:02 ` Wei Liu
2016-03-03 1:25 ` Wen Congyang
2016-02-22 2:52 ` [PATCH v10 11/31] tools/libxl: write checkpoint_state records into the stream Wen Congyang
2016-02-22 2:52 ` [PATCH v10 12/31] tools/libxl: add back channel support to read stream Wen Congyang
2016-02-25 15:54 ` Wei Liu
2016-02-26 2:16 ` Wen Congyang
2016-03-02 15:03 ` Wei Liu
2016-02-22 2:52 ` [PATCH v10 13/31] tools/libxl: handle checkpoint_state records in a libxl migration v2 " Wen Congyang
2016-02-22 2:52 ` [PATCH v10 14/31] tools/libx{l, c}: introduce wait_checkpoint callback Wen Congyang
2016-02-22 2:52 ` [PATCH v10 15/31] tools/libx{l, c}: add postcopy/suspend callback to restore side Wen Congyang
2016-02-22 2:52 ` [PATCH v10 16/31] secondary vm suspend/resume/checkpoint code Wen Congyang
2016-02-25 15:56 ` Wei Liu
2016-02-26 2:30 ` Wen Congyang
2016-03-01 10:06 ` Wen Congyang
2016-02-22 2:52 ` [PATCH v10 17/31] primary " Wen Congyang
2016-02-25 15:57 ` Wei Liu
2016-02-26 2:32 ` Wen Congyang
2016-02-22 2:52 ` [PATCH v10 18/31] libxc/restore: support COLO restore Wen Congyang
2016-02-25 15:57 ` Wei Liu
2016-02-26 2:33 ` Wen Congyang
2016-02-22 2:52 ` [PATCH v10 19/31] libxc/restore: send dirty pfn list to primary when checkpoint under colo Wen Congyang
2016-02-22 2:52 ` [PATCH v10 20/31] send store gfn and console gfn to xl before resuming secondary vm Wen Congyang
2016-02-22 2:52 ` [PATCH v10 21/31] libxc/save: support COLO save Wen Congyang
2016-02-25 15:58 ` Wei Liu
2016-02-26 2:35 ` Wen Congyang
2016-02-22 2:52 ` [PATCH v10 22/31] implement the cmdline for COLO Wen Congyang
2016-03-02 15:03 ` Wei Liu
2016-03-03 1:30 ` Wen Congyang
2016-02-22 2:52 ` [PATCH v10 23/31] COLO: introduce new API to prepare/start/do/get_error/stop replication Wen Congyang
2016-03-02 15:03 ` Wei Liu
2016-02-22 2:52 ` [PATCH v10 24/31] Support colo mode for qemu disk Wen Congyang
2016-03-02 15:04 ` Wei Liu
2016-03-03 1:40 ` Wen Congyang
2016-02-22 2:52 ` [PATCH v10 25/31] COLO: use qemu block replication Wen Congyang
2016-03-02 15:03 ` Wei Liu
2016-02-22 2:52 ` Wen Congyang [this message]
2016-03-02 15:04 ` [PATCH v10 26/31] COLO proxy: implement setup/teardown of COLO proxy module Wei Liu
2016-03-11 22:25 ` Konrad Rzeszutek Wilk
2016-03-14 9:13 ` Wen Congyang
2016-03-22 3:40 ` Changlong Xie
2016-02-22 2:52 ` [PATCH v10 27/31] COLO proxy: preresume, postresume and checkpoint Wen Congyang
2016-03-02 15:04 ` Wei Liu
2016-02-22 2:52 ` [PATCH v10 28/31] COLO nic: implement COLO nic subkind Wen Congyang
2016-03-02 15:04 ` Wei Liu
2016-02-22 2:52 ` [PATCH v10 29/31] setup and control colo proxy on primary side Wen Congyang
2016-02-22 2:52 ` [PATCH v10 30/31] setup and control colo proxy on secondary side Wen Congyang
2016-02-22 2:52 ` [PATCH v10 31/31] cmdline switches and config vars to control colo-proxy Wen Congyang
2016-03-02 15:05 ` Wei Liu
2016-03-03 1:41 ` Wen Congyang
2016-02-25 16:05 ` [PATCH v10 00/31] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Wei Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456109555-28299-27-git-send-email-wency@cn.fujitsu.com \
--to=wency@cn.fujitsu.com \
--cc=andrew.cooper3@citrix.com \
--cc=eddie.dong@intel.com \
--cc=guijianfeng@cn.fujitsu.com \
--cc=hongyang.yang@easystack.cn \
--cc=ian.campbell@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=konrad.wilk@oracle.com \
--cc=lars.kurth@citrix.com \
--cc=rshriram@cs.ubc.ca \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xen.org \
--cc=xiecl.fnst@cn.fujitsu.com \
--cc=yunhong.jiang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).