From: George Dunlap <george.dunlap@citrix.com>
To: xen-devel@lists.xenproject.org
Cc: Stefano Stabellini <sstabellini@kernel.org>,
George Dunlap <george.dunlap@citrix.com>
Subject: [PATCH raisin 2/4] config: Separate config urls into a separate file
Date: Mon, 13 Jun 2016 15:44:21 +0100 [thread overview]
Message-ID: <1465829063-22291-3-git-send-email-george.dunlap@citrix.com> (raw)
In-Reply-To: <1465829063-22291-1-git-send-email-george.dunlap@citrix.com>
So that we're not duplicating information.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
---
CC: Stefano Stabellini <sstabellini@kernel.org>
---
configs/config-4.5 | 39 ---------------------------------------
configs/config-4.6 | 39 ---------------------------------------
configs/config-master | 38 --------------------------------------
configs/config-url-git | 8 ++++++++
configs/config-url-http | 7 +++++++
defconfig | 35 ++++++++++++++++++++++++++++++++++-
6 files changed, 49 insertions(+), 117 deletions(-)
diff --git a/configs/config-4.5 b/configs/config-4.5
index e3b92d5..4163b68 100644
--- a/configs/config-4.5
+++ b/configs/config-4.5
@@ -1,37 +1,3 @@
-# Config variables for raisin
-# Setup a Xen 4.5 based system
-
-# Components
-## All components: seabios ovmf xen qemu qemu_traditional grub libvirt linux
-## Core xen functionality: xen
-## Remove a component from the list below, if you want to disable it
-## You can manually overwrite this list using the COMPONENTS
-## environmental variable.
-ENABLED_COMPONENTS="seabios ovmf xen qemu qemu_traditional grub libvirt"
-
-# Build config
-## Make command to run
-MAKE="make -j2"
-## Installation prefix (configure --prefix)
-PREFIX="/usr"
-## Install everything under DESTDIR
-## If you want to install under / run raise.sh -i
-DESTDIR=dist
-
-# Git urls. Use the http urls if you are behind a firewall.
-#XEN_URL="http://xenbits.xen.org/git-http/xen.git"
-#GRUB_URL="http://git.savannah.gnu.org/r/grub.git"
-#LIBVIRT_URL="https://gitorious.org/libvirt/libvirt.git"
-XEN_URL="git://xenbits.xen.org/xen.git"
-QEMU_URL="git://xenbits.xen.org/qemu-upstream-4.5-testing.git"
-QEMU_TRADITIONAL_URL="git://xenbits.xen.org/qemu-xen-4.5-testing.git"
-SEABIOS_URL="git://xenbits.xen.org/seabios.git"
-GRUB_URL="git://git.savannah.gnu.org/grub.git"
-LIBVIRT_URL="git://xenbits.xen.org/libvirt.git"
-OVMF_URL="git://xenbits.xen.org/ovmf.git"
-LINUX_URL="git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git"
-
-# Software versions.
XEN_REVISION="origin/stable-4.5"
QEMU_REVISION="master"
QEMU_TRADITIONAL_REVISION="master"
@@ -40,8 +6,3 @@ GRUB_REVISION="master"
LIBVIRT_REVISION="origin/xen-tested-master"
OVMF_REVISION="cb9a7ebabcd6b8a49dc0854b2f9592d732b5afbd"
LINUX_REVISION="master"
-
-# Tests
-## All tests: busybox-pv busybox-hvm
-## ENABLED_TESTS is the list of test run by raise test
-ENABLED_TESTS="busybox-pv busybox-hvm"
diff --git a/configs/config-4.6 b/configs/config-4.6
index ebd45e7..e8b2a09 100644
--- a/configs/config-4.6
+++ b/configs/config-4.6
@@ -1,37 +1,3 @@
-# Config variables for raisin
-# Setup a Xen 4.6 based system
-
-# Components
-## All components: seabios ovmf xen qemu qemu_traditional grub libvirt linux
-## Core xen functionality: xen
-## Remove a component from the list below, if you want to disable it
-## You can manually overwrite this list using the COMPONENTS
-## environmental variable.
-ENABLED_COMPONENTS="seabios ovmf xen qemu qemu_traditional grub libvirt"
-
-# Build config
-## Make command to run
-MAKE="make -j2"
-## Installation prefix (configure --prefix)
-PREFIX="/usr"
-## Install everything under DESTDIR
-## If you want to install under / run raise.sh -i
-DESTDIR=dist
-
-# Git urls. Use the http urls if you are behind a firewall.
-#XEN_URL="http://xenbits.xen.org/git-http/xen.git"
-#GRUB_URL="http://git.savannah.gnu.org/r/grub.git"
-#LIBVIRT_URL="https://gitorious.org/libvirt/libvirt.git"
-XEN_URL="git://xenbits.xen.org/xen.git"
-QEMU_URL="git://xenbits.xen.org/qemu-upstream-4.6-testing.git"
-QEMU_TRADITIONAL_URL="git://xenbits.xen.org/qemu-xen-4.6-testing.git"
-SEABIOS_URL="git://xenbits.xen.org/seabios.git"
-GRUB_URL="git://git.savannah.gnu.org/grub.git"
-LIBVIRT_URL="git://xenbits.xen.org/libvirt.git"
-OVMF_URL="git://xenbits.xen.org/ovmf.git"
-LINUX_URL="git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git"
-
-# Software versions.
XEN_REVISION="origin/stable-4.6"
QEMU_REVISION="master"
QEMU_TRADITIONAL_REVISION="master"
@@ -40,8 +6,3 @@ GRUB_REVISION="master"
LIBVIRT_REVISION="origin/xen-tested-master"
OVMF_REVISION="cb9a7ebabcd6b8a49dc0854b2f9592d732b5afbd"
LINUX_REVISION="master"
-
-# Tests
-## All tests: busybox-pv busybox-hvm
-## ENABLED_TESTS is the list of test run by raise test
-ENABLED_TESTS="busybox-pv busybox-hvm"
diff --git a/configs/config-master b/configs/config-master
index b218708..bd26ce3 100644
--- a/configs/config-master
+++ b/configs/config-master
@@ -1,36 +1,3 @@
-# Config variables for raisin
-
-# Components
-## All components: seabios ovmf xen qemu qemu_traditional grub libvirt linux
-## Core xen functionality: xen
-## Remove a component from the list below, if you want to disable it
-## You can manually overwrite this list using the COMPONENTS
-## environmental variable.
-ENABLED_COMPONENTS="seabios ovmf xen qemu qemu_traditional grub libvirt"
-
-# Build config
-## Make command to run
-MAKE="make -j2"
-## Installation prefix (configure --prefix)
-PREFIX="/usr"
-## Install everything under DESTDIR
-## If you want to install under / run raise.sh -i
-DESTDIR=dist
-
-# Git urls. Use the http urls if you are behind a firewall.
-#XEN_URL="http://xenbits.xen.org/git-http/xen.git"
-#GRUB_URL="http://git.savannah.gnu.org/r/grub.git"
-#LIBVIRT_URL="https://gitorious.org/libvirt/libvirt.git"
-XEN_URL="git://xenbits.xen.org/xen.git"
-QEMU_URL="git://xenbits.xen.org/qemu-upstream-unstable.git"
-QEMU_TRADITIONAL_URL="git://xenbits.xen.org/qemu-xen-unstable.git"
-SEABIOS_URL="git://xenbits.xen.org/osstest/seabios.git"
-GRUB_URL="git://git.savannah.gnu.org/grub.git"
-LIBVIRT_URL="git://xenbits.xen.org/libvirt.git"
-OVMF_URL="git://xenbits.xen.org/osstest/ovmf.git"
-LINUX_URL="git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git"
-
-# Software versions.
XEN_REVISION="master"
QEMU_REVISION="master"
QEMU_TRADITIONAL_REVISION="master"
@@ -39,8 +6,3 @@ GRUB_REVISION="master"
LIBVIRT_REVISION="origin/xen-tested-master"
OVMF_REVISION="origin/xen-tested-master"
LINUX_REVISION="master"
-
-# Tests
-## All tests: busybox-pv busybox-hvm
-## ENABLED_TESTS is the list of test run by raise test
-ENABLED_TESTS="busybox-pv busybox-hvm"
diff --git a/configs/config-url-git b/configs/config-url-git
new file mode 100644
index 0000000..79813c4
--- /dev/null
+++ b/configs/config-url-git
@@ -0,0 +1,8 @@
+XEN_URL="git://xenbits.xen.org/xen.git"
+QEMU_URL="git://xenbits.xen.org/qemu-xen.git"
+QEMU_TRADITIONAL_URL="git://xenbits.xen.org/qemu-xen-traditional.git"
+SEABIOS_URL="git://xenbits.xen.org/seabios.git"
+GRUB_URL="git://git.savannah.gnu.org/grub.git"
+LIBVIRT_URL="git://xenbits.xen.org/libvirt.git"
+OVMF_URL="git://xenbits.xen.org/ovmf.git"
+LINUX_URL="git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git"
diff --git a/configs/config-url-http b/configs/config-url-http
new file mode 100644
index 0000000..0ea8484
--- /dev/null
+++ b/configs/config-url-http
@@ -0,0 +1,7 @@
+XEN_URL="http://xenbits.xen.org/git-http/xen.git"
+QEMU_URL="http://xenbits.xen.org/git-http/qemu-xen.git"
+QEMU_TRADITIONAL_URL="http://xenbits.xen.org/git-http/qemu-xen-traditional.git"
+SEABIOS_URL="http://xenbits.xen.org/git-http/seabios.git"
+GRUB_URL="http://git.savannah.gnu.org/r/grub.git"
+LIBVIRT_URL="https://gitorious.org/libvirt/libvirt.git"
+OVMF_URL="http://xenbits.xen.org/git-http/ovmf.git"
diff --git a/defconfig b/defconfig
deleted file mode 120000
index 7ba643e..0000000
--- a/defconfig
+++ /dev/null
@@ -1 +0,0 @@
-configs/config-4.6
\ No newline at end of file
diff --git a/defconfig b/defconfig
new file mode 100644
index 0000000..8e79a43
--- /dev/null
+++ b/defconfig
@@ -0,0 +1,34 @@
+# Config variables for raisin
+# Setup a Xen based system.
+
+# Available options: 4.5, 4.6, master (for development branch)
+XEN_RELEASE="4.6"
+
+# Components
+## All components: seabios ovmf xen qemu qemu_traditional grub libvirt linux
+## Core xen functionality: xen
+## Remove a component from the list below, if you want to disable it
+## You can manually overwrite this list using the COMPONENTS
+## environmental variable.
+ENABLED_COMPONENTS="seabios ovmf xen qemu qemu_traditional grub libvirt"
+
+# Build config
+## Make command to run
+MAKE="make -j2"
+## Installation prefix (configure --prefix)
+PREFIX="/usr"
+## Install everything under DESTDIR
+## If you want to install under / run raise.sh -i
+DESTDIR=dist
+
+# Git transport. Use "http" if you're behind a firewall
+GIT_TRANSPORT="git"
+. configs/config-url-${GIT_TRANSPORT}
+
+# Software versions.
+. configs/config-${XEN_RELEASE}
+
+# Tests
+## All tests: busybox-pv busybox-hvm
+## ENABLED_TESTS is the list of test run by raise test
+ENABLED_TESTS="busybox-pv busybox-hvm"
--
2.1.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-06-13 14:45 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-13 14:44 [PATCH raisin 0/4] Fixes for 4.6, update to 4.7 George Dunlap
2016-06-13 14:44 ` [PATCH raisin 1/4] components/xen: Actually disable rombios George Dunlap
2016-06-14 9:32 ` Stefano Stabellini
2016-06-13 14:44 ` George Dunlap [this message]
2016-06-14 9:34 ` [PATCH raisin 2/4] config: Separate config urls into a separate file Stefano Stabellini
2016-06-13 14:44 ` [PATCH raisin 3/4] Update config-4.6 and config-4.5 to point to stable branches George Dunlap
2016-06-14 9:40 ` Stefano Stabellini
2016-06-14 9:57 ` George Dunlap
2016-06-14 10:01 ` Stefano Stabellini
2016-06-14 10:10 ` George Dunlap
2016-06-15 10:24 ` Stefano Stabellini
2016-06-15 10:38 ` George Dunlap
2016-06-15 10:53 ` Stefano Stabellini
2016-06-15 11:13 ` George Dunlap
2016-06-15 14:02 ` Stefano Stabellini
2016-06-15 16:11 ` George Dunlap
2016-06-13 14:44 ` [PATCH raisin 4/4] Update to 4.7, update qemu and qemu_traditional recipes George Dunlap
2016-06-14 9:46 ` Stefano Stabellini
2016-06-14 10:03 ` George Dunlap
2016-06-14 10:08 ` Stefano Stabellini
2016-06-14 10:17 ` George Dunlap
2016-06-14 10:31 ` Stefano Stabellini
2016-06-14 10:34 ` George Dunlap
2016-06-14 13:53 ` Anthony PERARD
2016-06-14 14:00 ` George Dunlap
2016-06-14 14:23 ` Anthony PERARD
2016-06-14 14:38 ` George Dunlap
2016-06-15 10:39 ` Stefano Stabellini
2016-06-15 10:42 ` George Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465829063-22291-3-git-send-email-george.dunlap@citrix.com \
--to=george.dunlap@citrix.com \
--cc=sstabellini@kernel.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).