From: Julien Grall <julien.grall@arm.com>
To: xen-devel@lists.xenproject.org
Cc: Julien Grall <julien.grall@arm.com>,
Stefano Stabellini <sstabellini@kernel.org>,
Volodymyr Babchuk <Volodymyr_Babchuk@epam.com>
Subject: [Xen-devel] [PATCH v3 22/28] xen/arm32: head: Rework and document launch()
Date: Mon, 12 Aug 2019 18:30:13 +0100 [thread overview]
Message-ID: <20190812173019.11956-23-julien.grall@arm.com> (raw)
In-Reply-To: <20190812173019.11956-1-julien.grall@arm.com>
Boot CPU and secondary CPUs will use different entry point to C code. At
the moment, the decision on which entry to use is taken within launch().
In order to avoid using conditional instruction and make the call
clearer, launch() is reworked to take in parameters the entry point and its
arguments.
Lastly, document the behavior and the main registers usage within the
function.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
---
Changes in v3:
- Add Stefano's reviewed-by
Changes in v2:
- Patch added
---
xen/arch/arm/arm32/head.S | 34 ++++++++++++++++++++++++----------
1 file changed, 24 insertions(+), 10 deletions(-)
diff --git a/xen/arch/arm/arm32/head.S b/xen/arch/arm/arm32/head.S
index ee5c3d2af8..3c18037575 100644
--- a/xen/arch/arm/arm32/head.S
+++ b/xen/arch/arm/arm32/head.S
@@ -174,6 +174,11 @@ primary_switched:
/* Use a virtual address to access the UART. */
mov_w r11, EARLY_UART_VIRTUAL_ADDRESS
#endif
+ PRINT("- Ready -\r\n")
+ /* Setup the arguments for start_xen and jump to C world */
+ mov r0, r10 /* r0 := Physical offset */
+ mov r1, r8 /* r1 := paddr(FDT) */
+ ldr r2, =start_xen
b launch
ENDPROC(start)
@@ -238,6 +243,9 @@ secondary_switched:
/* Use a virtual address to access the UART. */
mov_w r11, EARLY_UART_VIRTUAL_ADDRESS
#endif
+ PRINT("- Ready -\r\n")
+ /* Jump to C world */
+ ldr r2, =start_secondary
b launch
ENDPROC(init_secondary)
@@ -583,19 +591,25 @@ setup_fixmap:
mov pc, lr
ENDPROC(setup_fixmap)
+/*
+ * Setup the initial stack and jump to the C world
+ *
+ * Inputs:
+ * r0 : Argument 0 of the C function to call
+ * r1 : Argument 1 of the C function to call
+ * r2 : C entry point
+ *
+ * Clobbers r3
+ */
launch:
- PRINT("- Ready -\r\n")
-
- ldr r0, =init_data
- add r0, #INITINFO_stack /* Find the boot-time stack */
- ldr sp, [r0]
+ ldr r3, =init_data
+ add r3, #INITINFO_stack /* Find the boot-time stack */
+ ldr sp, [r3]
add sp, #STACK_SIZE /* (which grows down from the top). */
sub sp, #CPUINFO_sizeof /* Make room for CPU save record */
- teq r12, #0
- moveq r0, r10 /* Marshal args: - phys_offset */
- moveq r1, r8 /* - DTB address */
- beq start_xen /* and disappear into the land of C */
- b start_secondary /* (to the appropriate entry point) */
+
+ /* Jump to C world */
+ bx r2
ENDPROC(launch)
/* Fail-stop */
--
2.11.0
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
next prev parent reply other threads:[~2019-08-12 17:31 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-12 17:29 [Xen-devel] [PATCH v3 00/28] xen/arm: Rework head.S to make it more compliant with the Arm Arm Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 01/28] xen/arm: lpae: Allow more LPAE helpers to be used in assembly Julien Grall
2019-08-22 17:07 ` Stefano Stabellini
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 02/28] xen/arm64: head: Remove 1:1 mapping as soon as it is not used Julien Grall
2019-08-22 17:58 ` Stefano Stabellini
2019-08-22 18:25 ` Julien Grall
2019-08-22 18:29 ` Stefano Stabellini
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 03/28] xen/arm64: head: Rework and document setup_fixmap() Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 04/28] xen/arm64: head: Rework and document launch() Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 05/28] xen/arm64: head: Setup TTBR_EL2 in enable_mmu() and add missing isb Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 06/28] xen/arm64: head: Introduce a macro to get a PC-relative address of a symbol Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 07/28] xen/arm64: head: Fix typo in the documentation on top of init_uart() Julien Grall
2019-08-22 17:08 ` Stefano Stabellini
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 08/28] xen/arm32: head: Add a macro to move an immediate constant into a 32-bit register Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 09/28] xen/arm32: head: Mark the end of subroutines with ENDPROC Julien Grall
2019-08-12 17:33 ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 10/28] xen/arm32: head: Don't clobber r14/lr in the macro PRINT Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 11/28] xen/arm32: head: Rework UART initialization on boot CPU Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 12/28] xen/arm32: head: Introduce print_reg Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 13/28] xen/arm32: head: Introduce distinct paths for the boot CPU and secondary CPUs Julien Grall
2019-08-22 17:11 ` Stefano Stabellini
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 14/28] xen/arm32: head: Rework and document check_cpu_mode() Julien Grall
2019-08-22 17:14 ` Stefano Stabellini
2019-09-07 10:35 ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 15/28] xen/arm32: head: Rework and document zero_bss() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 16/28] xen/arm32: head: Document create_pages_tables() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 17/28] xen/arm32: head: Document enable_mmu() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 18/28] xen/arm32: head: Move assembly switch to the runtime PT in secondary CPUs path Julien Grall
2019-08-22 17:17 ` Stefano Stabellini
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 19/28] xen/arm32: head: Don't setup the fixmap on secondary CPUs Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 20/28] xen/arm32: head: Remove 1:1 mapping as soon as it is not used Julien Grall
2019-08-22 18:17 ` Stefano Stabellini
2019-08-22 18:31 ` Julien Grall
2019-08-22 22:53 ` Stefano Stabellini
2019-08-22 23:39 ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 21/28] xen/arm32: head: Rework and document setup_fixmap() Julien Grall
2019-08-12 17:30 ` Julien Grall [this message]
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 23/28] xen/arm32: head: Setup HTTBR in enable_mmu() and add missing isb Julien Grall
2019-08-22 17:15 ` Stefano Stabellini
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 24/28] xen/arm: Zero BSS after the MMU and D-cache is turned on Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 25/28] xen/arm64: head: Introduce macros to create table and mapping entry Julien Grall
2019-08-22 23:31 ` Stefano Stabellini
2019-08-22 23:44 ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 26/28] xen/arm64: head: Use a page mapping for the 1:1 mapping in create_page_tables() Julien Grall
2019-08-24 1:16 ` Stefano Stabellini
2019-09-17 17:53 ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 27/28] xen/arm32: head: Introduce macros to create table and mapping entry Julien Grall
2019-08-23 1:10 ` Stefano Stabellini
2019-08-23 9:40 ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 28/28] xen/arm32: head: Use a page mapping for the 1:1 mapping in create_page_tables() Julien Grall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190812173019.11956-23-julien.grall@arm.com \
--to=julien.grall@arm.com \
--cc=Volodymyr_Babchuk@epam.com \
--cc=sstabellini@kernel.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).