From: George Dunlap <George.Dunlap@eu.citrix.com>
To: Paulina Szubarczyk <paulinaszubarczyk@gmail.com>
Cc: "Wei Liu" <wei.liu2@citrix.com>,
"Ian Campbell" <ian.campbell@citrix.com>,
"Dario Faggioli" <dario.faggioli@citrix.com>,
"Ian Jackson" <ian.jackson@eu.citrix.com>,
xen-devel <xen-devel@lists.xenproject.org>,
"Roger Pau Monné" <roger.pau@citrix.com>
Subject: Re: [PATCH v2 09/10] libxl: Fix libxl_set_memory_target return value
Date: Wed, 6 Apr 2016 13:54:10 +0100 [thread overview]
Message-ID: <CAFLBxZa=D37X7AX78DrAWdH_GHZoit2B8yBwvrAUfWs4FEV2NA@mail.gmail.com> (raw)
In-Reply-To: <1459943163-18697-10-git-send-email-paulinaszubarczyk@gmail.com>
On Wed, Apr 6, 2016 at 12:46 PM, Paulina Szubarczyk
<paulinaszubarczyk@gmail.com> wrote:
> From: George Dunlap <George.Dunlap@eu.citrix.com>
>
> libxl_set_memory_target seems to have the following return values:
>
> * 1 on failure, if the failure happens because of a xenstore error *or*
> * invalid target
>
> * -1 if the setmaxmem hypercall
>
> * -errno if the set_pod_target hypercall target fails
>
> * 0 on success
>
> Make it consistently return ERROR_FAIL on failure, unless the
> parameters were invalid, in which case return ERROR_INVAL.
>
> In accordance with CODING_SYTLE:
>
> 1. Leave rc uninitialized, and set when an error is detected
>
> 2. Use 'r' for return values to functions whose return values are a
> different error space (like xc_domain_setmaxmem and
> xc_domain_set_pod_target)
>
> ---
> Changed since v1:
>
> 3. Use 'lrc' for return values to local functions libxl__*
> where a failure means retry, rather than fail the whole function
> (libxl__fill_dom0_memory_info), to reduce the risk of that.
>
> Signed-off-by: George Dunlap <George.Dunlap@eu.citrix.com>
> Signed-off-by: Paulina Szubarczyk <paulinaszubarczyk@gmail.com>
FYI everything after the "---" will be discarded on commit; so you
need all the tags (signed-off-by, acked-by, &c) to be before that.
-George
> ---
> tools/libxl/libxl.c | 28 ++++++++++++++++++----------
> 1 file changed, 18 insertions(+), 10 deletions(-)
>
> diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
> index 75f00be..057366e 100644
> --- a/tools/libxl/libxl.c
> +++ b/tools/libxl/libxl.c
> @@ -4824,7 +4824,7 @@ int libxl_set_memory_target(libxl_ctx *ctx, uint32_t domid,
> int32_t target_memkb, int relative, int enforce)
> {
> GC_INIT(ctx);
> - int rc = 1, abort_transaction = 0;
> + int rc, r, lrc, abort_transaction = 0;
> uint64_t memorykb;
> uint32_t videoram = 0;
> uint32_t current_target_memkb = 0, new_target_memkb = 0;
> @@ -4852,15 +4852,15 @@ retry_transaction:
> if (!target && !domid) {
> if (!xs_transaction_end(ctx->xsh, t, 1))
> goto out_no_transaction;
> - rc = libxl__fill_dom0_memory_info(gc, ¤t_target_memkb,
> + lrc = libxl__fill_dom0_memory_info(gc, ¤t_target_memkb,
> ¤t_max_memkb);
> - if (rc < 0)
> - goto out_no_transaction;
> + if (lrc < 0) { rc = ERROR_FAIL; goto out_no_transaction; }
> goto retry_transaction;
> } else if (!target) {
> LOGE(ERROR, "cannot get target memory info from %s/memory/target",
> dompath);
> abort_transaction = 1;
> + rc = ERROR_FAIL;
> goto out;
> } else {
> current_target_memkb = strtoul(target, &endptr, 10);
> @@ -4868,6 +4868,7 @@ retry_transaction:
> LOGE(ERROR, "invalid memory target %s from %s/memory/target\n",
> target, dompath);
> abort_transaction = 1;
> + rc = ERROR_FAIL;
> goto out;
> }
> }
> @@ -4876,6 +4877,7 @@ retry_transaction:
> LOGE(ERROR, "cannot get memory info from %s/memory/static-max",
> dompath);
> abort_transaction = 1;
> + rc = ERROR_FAIL;
> goto out;
> }
> memorykb = strtoul(memmax, &endptr, 10);
> @@ -4883,6 +4885,7 @@ retry_transaction:
> LOGE(ERROR, "invalid max memory %s from %s/memory/static-max\n",
> memmax, dompath);
> abort_transaction = 1;
> + rc = ERROR_FAIL;
> goto out;
> }
>
> @@ -4902,6 +4905,7 @@ retry_transaction:
> "memory_dynamic_max must be less than or equal to"
> " memory_static_max\n");
> abort_transaction = 1;
> + rc = ERROR_INVAL;
> goto out;
> }
>
> @@ -4909,33 +4913,36 @@ retry_transaction:
> LOG(ERROR, "new target %d for dom0 is below the minimum threshold",
> new_target_memkb);
> abort_transaction = 1;
> + rc = ERROR_INVAL;
> goto out;
> }
>
> if (enforce) {
> memorykb = new_target_memkb + videoram;
> - rc = xc_domain_setmaxmem(ctx->xch, domid, memorykb +
> + r = xc_domain_setmaxmem(ctx->xch, domid, memorykb +
> LIBXL_MAXMEM_CONSTANT);
> - if (rc != 0) {
> + if (r != 0) {
> LOGE(ERROR,
> "xc_domain_setmaxmem domid=%u memkb=%"PRIu64" failed ""rc=%d\n",
> domid,
> memorykb + LIBXL_MAXMEM_CONSTANT,
> - rc);
> + r);
> abort_transaction = 1;
> + rc = ERROR_FAIL;
> goto out;
> }
> }
>
> - rc = xc_domain_set_pod_target(ctx->xch, domid,
> + r = xc_domain_set_pod_target(ctx->xch, domid,
> (new_target_memkb + LIBXL_MAXMEM_CONSTANT) / 4, NULL, NULL, NULL);
> - if (rc != 0) {
> + if (r != 0) {
> LOGE(ERROR,
> "xc_domain_set_pod_target domid=%d, memkb=%d ""failed rc=%d\n",
> domid,
> new_target_memkb / 4,
> - rc);
> + r);
> abort_transaction = 1;
> + rc = ERROR_FAIL;
> goto out;
> }
>
> @@ -4949,6 +4956,7 @@ retry_transaction:
> "%"PRIu32, new_target_memkb / 1024);
> libxl_dominfo_dispose(&ptr);
>
> + rc = 0;
> out:
> if (!xs_transaction_end(ctx->xsh, t, abort_transaction)
> && !abort_transaction)
> --
> 1.9.1
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> http://lists.xen.org/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-04-06 12:54 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-06 11:45 [PATCH v2 00/10] xl: improve coding style and return more failure on failure for more xl commands Paulina Szubarczyk
2016-04-06 11:45 ` [PATCH v2 01/10] libxl_pci: improve return codes " Paulina Szubarczyk
2016-04-08 8:00 ` Dario Faggioli
2016-04-06 11:45 ` [PATCH v2 02/10] libxl-pci: removing the extra 'out_closedir' cleaning path Paulina Szubarczyk
2016-04-08 8:12 ` Dario Faggioli
2016-04-06 11:45 ` [PATCH v2 03/10] libxl: fix return value of libxl__device_pci_destroy_all Paulina Szubarczyk
2016-04-08 8:19 ` Dario Faggioli
2016-04-06 11:45 ` [PATCH v2 04/10] xl: improve return code for freemem function Paulina Szubarczyk
2016-04-06 11:45 ` [PATCH v2 05/10] xl_cmdimpl: improve return codes for memset commands Paulina Szubarczyk
2016-04-08 8:26 ` Dario Faggioli
2016-04-08 9:04 ` Paulina Szubarczyk
2016-04-08 9:41 ` Dario Faggioli
2016-04-06 11:45 ` [PATCH v2 06/10] xl_cmdimpl: improve return codes for cd-insert commands Paulina Szubarczyk
2016-04-08 8:29 ` Dario Faggioli
2016-04-06 11:46 ` [PATCH v2 07/10] xl_cmdimpl - Add return codes for pci-detach, pci-attach, pci-asssignable-add, and pci-assignable-remove Paulina Szubarczyk
2016-04-08 8:36 ` Dario Faggioli
2016-04-06 11:46 ` [PATCH v2 08/10] libxl: improve main_tmem_* return codes Paulina Szubarczyk
2016-04-08 9:00 ` Dario Faggioli
2016-04-06 11:46 ` [PATCH v2 09/10] libxl: Fix libxl_set_memory_target return value Paulina Szubarczyk
2016-04-06 12:54 ` George Dunlap [this message]
2016-04-06 13:21 ` Paulina Szubarczyk
2016-04-06 13:53 ` George Dunlap
2016-04-06 11:46 ` [PATCH v2 10/10] libxl: libxl_tmem functions improving coding style Paulina Szubarczyk
2016-04-08 8:54 ` Dario Faggioli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAFLBxZa=D37X7AX78DrAWdH_GHZoit2B8yBwvrAUfWs4FEV2NA@mail.gmail.com' \
--to=george.dunlap@eu.citrix.com \
--cc=dario.faggioli@citrix.com \
--cc=ian.campbell@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=paulinaszubarczyk@gmail.com \
--cc=roger.pau@citrix.com \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).