From: Elliot Berman <eberman@codeaurora.org>
To: bjorn.andersson@linaro.org, agross@kernel.org, swboyd@chromium.org
Cc: Elliot Berman <eberman@codeaurora.org>,
saiprakash.ranjan@codeaurora.org, tsoni@codeaurora.org,
sidgup@codeaurora.org, psodagud@codeaurora.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 05/17] firmware: qcom_scm-64: Move svc/cmd/owner into qcom_scm_desc
Date: Thu, 12 Dec 2019 18:51:11 +0000 [thread overview]
Message-ID: <0101016efb735ca9-2c5838f8-4796-4916-957d-e492bda3441f-000000@us-west-2.amazonses.com> (raw)
In-Reply-To: <1576176651-17089-1-git-send-email-eberman@codeaurora.org>
Service, command, and owner IDs are all part of qcom_scm_desc struct and
have no special reason to be a function argument (or hard-coded in the
case of owner [1]). Moving them to be part of qcom_scm_desc struct improves
readability.
[1]: Example of SCM function using owner vale other than hard-coded SIP value:
https://source.codeaurora.org/quic/la/kernel/msm-4.9/tree/drivers/soc/qcom/smcinvoke.c?h=kernel.lnx.4.9.r28-rel#n35
Signed-off-by: Elliot Berman <eberman@codeaurora.org>
---
drivers/firmware/qcom_scm-64.c | 195 +++++++++++++++++++++++++----------------
1 file changed, 121 insertions(+), 74 deletions(-)
diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
index 3101f36..7b7aa88 100644
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -48,8 +48,11 @@ enum qcom_scm_arg_types {
* @res: The values returned by the secure syscall
*/
struct qcom_scm_desc {
+ u32 svc;
+ u32 cmd;
u32 arginfo;
u64 args[MAX_QCOM_SCM_ARGS];
+ u32 owner;
};
static u64 qcom_smccc_convention = -1;
@@ -63,14 +66,16 @@ static DEFINE_MUTEX(qcom_scm_lock);
#define SCM_SMC_N_EXT_ARGS (MAX_QCOM_SCM_ARGS - SCM_SMC_N_REG_ARGS + 1)
static void __scm_smc_do_quirk(const struct qcom_scm_desc *desc,
- struct arm_smccc_res *res, u32 fn_id,
- u64 x5, u32 type)
+ struct arm_smccc_res *res, u64 x5, u32 type)
{
u64 cmd;
struct arm_smccc_quirk quirk = { .id = ARM_SMCCC_QUIRK_QCOM_A6 };
- cmd = ARM_SMCCC_CALL_VAL(type, qcom_smccc_convention,
- ARM_SMCCC_OWNER_SIP, fn_id);
+ cmd = ARM_SMCCC_CALL_VAL(
+ type,
+ qcom_smccc_convention,
+ desc->owner,
+ SCM_SMC_FNID(desc->svc, desc->cmd));
quirk.state.a6 = 0;
@@ -86,22 +91,19 @@ static void __scm_smc_do_quirk(const struct qcom_scm_desc *desc,
}
static void __scm_smc_do(const struct qcom_scm_desc *desc,
- struct arm_smccc_res *res, u32 fn_id,
- u64 x5, bool atomic)
+ struct arm_smccc_res *res, u64 x5, bool atomic)
{
int retry_count = 0;
if (atomic) {
- __scm_smc_do_quirk(desc, res, fn_id, x5,
- ARM_SMCCC_FAST_CALL);
+ __scm_smc_do_quirk(desc, res, x5, ARM_SMCCC_FAST_CALL);
return;
}
do {
mutex_lock(&qcom_scm_lock);
- __scm_smc_do_quirk(desc, res, fn_id, x5,
- ARM_SMCCC_STD_CALL);
+ __scm_smc_do_quirk(desc, res, x5, ARM_SMCCC_STD_CALL);
mutex_unlock(&qcom_scm_lock);
@@ -113,13 +115,11 @@ static void __scm_smc_do(const struct qcom_scm_desc *desc,
} while (res->a0 == QCOM_SCM_V2_EBUSY);
}
-static int __scm_smc_call(struct device *dev, u32 svc_id, u32 cmd_id,
- const struct qcom_scm_desc *desc,
- struct arm_smccc_res *res, bool atomic)
+static int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
+ struct arm_smccc_res *res, bool atomic)
{
int arglen = desc->arginfo & 0xf;
int i;
- u32 fn_id = SCM_SMC_FNID(svc_id, cmd_id);
u64 x5 = desc->args[SCM_SMC_FIRST_EXT_IDX];
dma_addr_t args_phys = 0;
void *args_virt = NULL;
@@ -158,7 +158,7 @@ static int __scm_smc_call(struct device *dev, u32 svc_id, u32 cmd_id,
x5 = args_phys;
}
- __scm_smc_do(desc, res, fn_id, x5, atomic);
+ __scm_smc_do(desc, res, x5, atomic);
if (args_virt) {
dma_unmap_single(dev, args_phys, alloc_len, DMA_TO_DEVICE);
@@ -181,12 +181,11 @@ static int __scm_smc_call(struct device *dev, u32 svc_id, u32 cmd_id,
* Sends a command to the SCM and waits for the command to finish processing.
* This should *only* be called in pre-emptible context.
*/
-static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
- const struct qcom_scm_desc *desc,
+static int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
struct arm_smccc_res *res)
{
might_sleep();
- return __scm_smc_call(dev, svc_id, cmd_id, desc, res, false);
+ return __scm_smc_call(dev, desc, res, false);
}
/**
@@ -200,11 +199,11 @@ static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
* Sends a command to the SCM and waits for the command to finish processing.
* This can be called in atomic context.
*/
-static int qcom_scm_call_atomic(struct device *dev, u32 svc_id, u32 cmd_id,
+static int qcom_scm_call_atomic(struct device *dev,
const struct qcom_scm_desc *desc,
struct arm_smccc_res *res)
{
- return __scm_smc_call(dev, svc_id, cmd_id, desc, res, true);
+ return __scm_smc_call(dev, desc, res, true);
}
/**
@@ -250,15 +249,18 @@ void __qcom_scm_cpu_power_down(u32 flags)
int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
{
int ret;
- struct qcom_scm_desc desc = {0};
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_INFO,
+ .cmd = QCOM_SCM_INFO_IS_CALL_AVAIL,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
struct arm_smccc_res res;
desc.arginfo = QCOM_SCM_ARGS(1);
desc.args[0] = SCM_SMC_FNID(svc_id, cmd_id) |
(ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_SCM_INFO_IS_CALL_AVAIL,
- &desc, &res);
+ ret = qcom_scm_call(dev, &desc, &res);
return ret ? : res.a1;
}
@@ -267,7 +269,11 @@ int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
u32 req_cnt, u32 *resp)
{
int ret;
- struct qcom_scm_desc desc = {0};
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_HDCP,
+ .cmd = QCOM_SCM_HDCP_INVOKE,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
struct arm_smccc_res res;
if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
@@ -285,8 +291,7 @@ int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
desc.args[9] = req[4].val;
desc.arginfo = QCOM_SCM_ARGS(10);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_HDCP_INVOKE, &desc,
- &res);
+ ret = qcom_scm_call(dev, &desc, &res);
*resp = res.a1;
return ret;
@@ -326,15 +331,17 @@ void __qcom_scm_init(void)
bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
{
int ret;
- struct qcom_scm_desc desc = {0};
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_PIL,
+ .cmd = QCOM_SCM_PIL_PAS_IS_SUPPORTED,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
struct arm_smccc_res res;
desc.args[0] = peripheral;
desc.arginfo = QCOM_SCM_ARGS(1);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PIL_PAS_IS_SUPPORTED,
- &desc, &res);
+ ret = qcom_scm_call(dev, &desc, &res);
return ret ? false : !!res.a1;
}
@@ -343,15 +350,18 @@ int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
dma_addr_t metadata_phys)
{
int ret;
- struct qcom_scm_desc desc = {0};
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_PIL,
+ .cmd = QCOM_SCM_PIL_PAS_INIT_IMAGE,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
struct arm_smccc_res res;
desc.args[0] = peripheral;
desc.args[1] = metadata_phys;
desc.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_INIT_IMAGE,
- &desc, &res);
+ ret = qcom_scm_call(dev, &desc, &res);
return ret ? : res.a1;
}
@@ -360,7 +370,11 @@ int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
phys_addr_t addr, phys_addr_t size)
{
int ret;
- struct qcom_scm_desc desc = {0};
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_PIL,
+ .cmd = QCOM_SCM_PIL_PAS_MEM_SETUP,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
struct arm_smccc_res res;
desc.args[0] = peripheral;
@@ -368,8 +382,7 @@ int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
desc.args[2] = size;
desc.arginfo = QCOM_SCM_ARGS(3);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_MEM_SETUP,
- &desc, &res);
+ ret = qcom_scm_call(dev, &desc, &res);
return ret ? : res.a1;
}
@@ -377,15 +390,17 @@ int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
{
int ret;
- struct qcom_scm_desc desc = {0};
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_PIL,
+ .cmd = QCOM_SCM_PIL_PAS_AUTH_AND_RESET,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
struct arm_smccc_res res;
desc.args[0] = peripheral;
desc.arginfo = QCOM_SCM_ARGS(1);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PIL_PAS_AUTH_AND_RESET,
- &desc, &res);
+ ret = qcom_scm_call(dev, &desc, &res);
return ret ? : res.a1;
}
@@ -393,21 +408,28 @@ int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
{
int ret;
- struct qcom_scm_desc desc = {0};
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_PIL,
+ .cmd = QCOM_SCM_PIL_PAS_SHUTDOWN,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
struct arm_smccc_res res;
desc.args[0] = peripheral;
desc.arginfo = QCOM_SCM_ARGS(1);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_SHUTDOWN,
- &desc, &res);
+ ret = qcom_scm_call(dev, &desc, &res);
return ret ? : res.a1;
}
int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
{
- struct qcom_scm_desc desc = {0};
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_PIL,
+ .cmd = QCOM_SCM_PIL_PAS_MSS_RESET,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
struct arm_smccc_res res;
int ret;
@@ -415,15 +437,18 @@ int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
desc.args[1] = 0;
desc.arginfo = QCOM_SCM_ARGS(2);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_MSS_RESET, &desc,
- &res);
+ ret = qcom_scm_call(dev, &desc, &res);
return ret ? : res.a1;
}
int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
{
- struct qcom_scm_desc desc = {0};
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_BOOT,
+ .cmd = QCOM_SCM_BOOT_SET_REMOTE_STATE,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
struct arm_smccc_res res;
int ret;
@@ -431,8 +456,7 @@ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
desc.args[1] = id;
desc.arginfo = QCOM_SCM_ARGS(2);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_REMOTE_STATE,
- &desc, &res);
+ ret = qcom_scm_call(dev, &desc, &res);
return ret ? : res.a1;
}
@@ -442,7 +466,11 @@ int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
phys_addr_t dest, size_t dest_sz)
{
int ret;
- struct qcom_scm_desc desc = {0};
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_MP,
+ .cmd = QCOM_SCM_MP_ASSIGN,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
struct arm_smccc_res res;
desc.args[0] = mem_region;
@@ -457,16 +485,18 @@ int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
QCOM_SCM_RO, QCOM_SCM_VAL, QCOM_SCM_RO,
QCOM_SCM_VAL, QCOM_SCM_VAL);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP,
- QCOM_SCM_MP_ASSIGN,
- &desc, &res);
+ ret = qcom_scm_call(dev, &desc, &res);
return ret ? : res.a1;
}
int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id, u32 spare)
{
- struct qcom_scm_desc desc = {0};
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_MP,
+ .cmd = QCOM_SCM_MP_RESTORE_SEC_CFG,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
struct arm_smccc_res res;
int ret;
@@ -474,8 +504,7 @@ int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id, u32 spare)
desc.args[1] = spare;
desc.arginfo = QCOM_SCM_ARGS(2);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP, QCOM_SCM_MP_RESTORE_SEC_CFG,
- &desc, &res);
+ ret = qcom_scm_call(dev, &desc, &res);
return ret ? : res.a1;
}
@@ -483,15 +512,18 @@ int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id, u32 spare)
int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
size_t *size)
{
- struct qcom_scm_desc desc = {0};
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_MP,
+ .cmd = QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
struct arm_smccc_res res;
int ret;
desc.args[0] = spare;
desc.arginfo = QCOM_SCM_ARGS(1);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP,
- QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE, &desc, &res);
+ ret = qcom_scm_call(dev, &desc, &res);
if (size)
*size = res.a1;
@@ -502,7 +534,11 @@ int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,
u32 spare)
{
- struct qcom_scm_desc desc = {0};
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_MP,
+ .cmd = QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
struct arm_smccc_res res;
int ret;
@@ -512,8 +548,7 @@ int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,
desc.arginfo = QCOM_SCM_ARGS(3, QCOM_SCM_RW, QCOM_SCM_VAL,
QCOM_SCM_VAL);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP,
- QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT, &desc, &res);
+ ret = qcom_scm_call(dev, &desc, &res);
/* the pg table has been initialized already, ignore the error */
if (ret == -EPERM)
@@ -524,29 +559,35 @@ int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,
int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
{
- struct qcom_scm_desc desc = {0};
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_BOOT,
+ .cmd = QCOM_SCM_BOOT_SET_DLOAD_MODE,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
struct arm_smccc_res res;
desc.args[0] = QCOM_SCM_BOOT_SET_DLOAD_MODE;
desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0;
desc.arginfo = QCOM_SCM_ARGS(2);
- return qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_DLOAD_MODE,
- &desc, &res);
+ return qcom_scm_call(dev, &desc, &res);
}
int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr,
unsigned int *val)
{
- struct qcom_scm_desc desc = {0};
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_IO,
+ .cmd = QCOM_SCM_IO_READ,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
struct arm_smccc_res res;
int ret;
desc.args[0] = addr;
desc.arginfo = QCOM_SCM_ARGS(1);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_IO, QCOM_SCM_IO_READ,
- &desc, &res);
+ ret = qcom_scm_call(dev, &desc, &res);
if (ret >= 0)
*val = res.a1;
@@ -555,26 +596,32 @@ int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr,
int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val)
{
- struct qcom_scm_desc desc = {0};
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_IO,
+ .cmd = QCOM_SCM_IO_WRITE,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
struct arm_smccc_res res;
desc.args[0] = addr;
desc.args[1] = val;
desc.arginfo = QCOM_SCM_ARGS(2);
- return qcom_scm_call(dev, QCOM_SCM_SVC_IO, QCOM_SCM_IO_WRITE,
- &desc, &res);
+ return qcom_scm_call(dev, &desc, &res);
}
int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev, bool en)
{
- struct qcom_scm_desc desc = {0};
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_SMMU_PROGRAM,
+ .cmd = QCOM_SCM_SMMU_CONFIG_ERRATA1,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
struct arm_smccc_res res;
desc.args[0] = QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL;
desc.args[1] = en;
desc.arginfo = QCOM_SCM_ARGS(2);
- return qcom_scm_call_atomic(dev, QCOM_SCM_SVC_SMMU_PROGRAM,
- QCOM_SCM_SMMU_CONFIG_ERRATA1, &desc, &res);
+ return qcom_scm_call_atomic(dev, &desc, &res);
}
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2019-12-12 18:52 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1576176651-17089-1-git-send-email-eberman@codeaurora.org>
2019-12-12 18:51 ` [PATCH v4 01/17] firmware: qcom_scm: Rename macros and structures Elliot Berman
2019-12-12 18:51 ` [PATCH v4 02/17] firmware: qcom_scm: Apply consistent naming scheme to command IDs Elliot Berman
2019-12-12 18:51 ` [PATCH v4 04/17] firmware: qcom_scm-64: Make SMC macros less magical Elliot Berman
2019-12-12 18:51 ` [PATCH v4 03/17] firmware: qcom_scm: Remove unused qcom_scm_get_version Elliot Berman
2019-12-12 18:51 ` Elliot Berman [this message]
2019-12-12 18:51 ` [PATCH v4 08/17] firmware: qcom_scm-64: Improve SMC convention detection Elliot Berman
2019-12-12 18:51 ` [PATCH v4 06/17] firmware: qcom_scm-64: Add SCM results struct Elliot Berman
2019-12-12 18:51 ` [PATCH v4 10/17] firmware: qcom_scm-32: Add funcnum IDs Elliot Berman
2019-12-12 18:51 ` [PATCH v4 07/17] firmware: qcom_scm-64: Move SMC register filling to qcom_scm_call_smccc Elliot Berman
2019-12-12 18:51 ` [PATCH v4 09/17] firmware: qcom_scm-32: Use SMC arch wrappers Elliot Berman
2019-12-12 18:51 ` [PATCH v4 12/17] firmware: qcom_scm-32: Move SMCCC register filling to qcom_scm_call Elliot Berman
2019-12-12 18:51 ` [PATCH v4 13/17] firmware: qcom_scm-32: Create common legacy atomic call Elliot Berman
2019-12-12 18:51 ` [PATCH v4 11/17] firmware: qcom_scm-32: Use qcom_scm_desc in non-atomic calls Elliot Berman
2019-12-12 18:51 ` [PATCH v4 14/17] firmware: qcom_scm-32: Add device argument to atomic calls Elliot Berman
2019-12-12 18:51 ` [PATCH v4 15/17] firmware: qcom_scm: Order functions, definitions by service/command Elliot Berman
2019-12-12 18:51 ` [PATCH v4 17/17] firmware: qcom_scm: Dynamically support SMCCC and legacy conventions Elliot Berman
2019-12-12 18:51 ` [PATCH v4 16/17] firmware: qcom_scm: Remove thin wrappers Elliot Berman
2020-01-05 11:21 ` Stephan Gerhold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0101016efb735ca9-2c5838f8-4796-4916-957d-e492bda3441f-000000@us-west-2.amazonses.com \
--to=eberman@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=psodagud@codeaurora.org \
--cc=saiprakash.ranjan@codeaurora.org \
--cc=sidgup@codeaurora.org \
--cc=swboyd@chromium.org \
--cc=tsoni@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.