Re: [PATCH 2/2] USB: dwc2: Add OTG support for Ingenic SoCs.

From: Zhou Yanjie <zhouyanjie@wanyeetech.com>
To: Greg KH <gregkh@linuxfoundation.org>
Cc: robh+dt@kernel.org, hminas@synopsys.com, paul@crapouillou.net,
	devicetree@vger.kernel.org, linux-usb@vger.kernel.org,
	linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org,
	dongsheng.qiu@ingenic.com, aric.pzqi@ingenic.com,
	rick.tyliu@ingenic.com, sihui.liu@ingenic.com,
	jun.jiang@ingenic.com, sernia.zhou@foxmail.com,
	"Dragan Čečavac" <dragancecavac@yahoo.com>
Subject: Re: [PATCH 2/2] USB: dwc2: Add OTG support for Ingenic SoCs.
Date: Fri, 30 Jul 2021 17:34:17 +0800	[thread overview]
Message-ID: <01db0ee3-8c80-1df6-e351-8bc944035c25@wanyeetech.com> (raw)
In-Reply-To: <YQAXt1pCFZqRm2ud@kroah.com>

Hi Greg,

On 2021/7/27 下午10:27, Greg KH wrote:
> On Sat, Jul 24, 2021 at 04:48:41PM +0800, 周琰杰 (Zhou Yanjie) wrote:
>> Add OTG support for the JZ4775 SoC, the JZ4780 SoC, the X1000
>> SoC, the X1600 SoC, the X1830 SoC, and the X2000 SoC. Introduce
>> support for disable Ingenic overcurrent detection, once selected
>> it enables GOTGCTL register bits VbvalidOvEn and VbvalidOvVal to
>> disable the VBUS overcurrent detection.
>>
>> This patch is derived from Dragan Čečavac (in the kernel 3.18.3
>> tree of CI20). It is very useful for the MIPS Creator CI20 (r1).
>> Without this patch, OTG port of CI20 has a great probability to
>> face overcurrent warning, which breaks the OTG functionality.
>>
>> Signed-off-by: Dragan Čečavac <dragancecavac@yahoo.com>
>> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
>> ---
>>   drivers/usb/dwc2/core.c   |  9 +++++++++
>>   drivers/usb/dwc2/core.h   |  5 +++++
>>   drivers/usb/dwc2/params.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++-
>>   3 files changed, 62 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
>> index 272ae57..c35b2e2 100644
>> --- a/drivers/usb/dwc2/core.c
>> +++ b/drivers/usb/dwc2/core.c
>> @@ -1153,6 +1153,7 @@ static void dwc2_set_turnaround_time(struct dwc2_hsotg *hsotg)
>>   int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
>>   {
>>   	u32 usbcfg;
>> +	u32 otgctl;
>>   	int retval = 0;
>>   
>>   	if ((hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
>> @@ -1187,6 +1188,14 @@ int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
>>   		dwc2_writel(hsotg, usbcfg, GUSBCFG);
>>   	}
>>   
>> +	if (hsotg->params.deactivate_ingenic_overcurrent_detection) {
>> +		if (dwc2_is_host_mode(hsotg)) {
>> +			otgctl = readl(hsotg->regs + GOTGCTL);
>> +			otgctl |= GOTGCTL_VBVALOEN | GOTGCTL_VBVALOVAL;
>> +			writel(otgctl, hsotg->regs + GOTGCTL);
>> +		}
>> +	}
>> +
>>   	return retval;
>>   }
>>   
>> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
>> index ab6b815..e026d13 100644
>> --- a/drivers/usb/dwc2/core.h
>> +++ b/drivers/usb/dwc2/core.h
>> @@ -418,6 +418,10 @@ enum dwc2_ep0_state {
>>    *			detection using GGPIO register.
>>    *			0 - Deactivate the external level detection (default)
>>    *			1 - Activate the external level detection
>> + * @deactivate_ingenic_overcurrent_detection: Deactivate Ingenic overcurrent
>> + *			detection.
>> + *			0 - Activate the overcurrent detection (default)
> Having 0 as "active" is rough to handle over time.
>
> All of the other options are "activate", so please, keep them the same
> if at all possible.

Sure, I will try.

Thanks and best regards!

>
> thanks,
>
> greg k-h