From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Stephan Gerhold <stephan@gerhold.net>,
Bjorn Andersson <andersson@kernel.org>
Cc: Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-remoteproc@vger.kernel.org
Subject: Re: [PATCH 11/14] arm64: dts: qcom: Add rpm-proc node for SMD platforms
Date: Mon, 5 Jun 2023 21:07:42 +0200 [thread overview]
Message-ID: <056c7b05-c41e-1e63-d94b-2d7b27356bc6@linaro.org> (raw)
In-Reply-To: <20230531-rpm-rproc-v1-11-e0a3b6de1f14@gerhold.net>
On 5.06.2023 09:08, Stephan Gerhold wrote:
> Rather than having the RPM SMD channels as the only child of a dummy
> SMD node, switch to representing the RPM as remoteproc like all the
> other remoteprocs (WCNSS, modem DSP).
>
> This allows assigning additional subdevices to it like the MPM
> interrupt-controller or rpm-master-stats.
>
> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 6 +-
> arch/arm64/boot/dts/qcom/msm8939.dtsi | 112 ++++++++++++-------------
> arch/arm64/boot/dts/qcom/msm8953.dtsi | 136 +++++++++++++++---------------
> arch/arm64/boot/dts/qcom/msm8976.dtsi | 152 +++++++++++++++++-----------------
> arch/arm64/boot/dts/qcom/msm8994.dtsi | 99 +++++++++++-----------
> 5 files changed, 253 insertions(+), 252 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index 9494b6512d87..667748612d3e 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -282,10 +282,10 @@ CLUSTER_PD: power-domain-cluster {
> };
> };
>
> - smd {
> - compatible = "qcom,smd";
> + rpm: remoteproc-rpm {
> + compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc";
>
> - rpm {
> + smd-edge {
> interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
> qcom,ipc = <&apcs 8 0>;
> qcom,smd-edge = <15>;
> diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
> index 0d9f8b951b66..f11d522586eb 100644
> --- a/arch/arm64/boot/dts/qcom/msm8939.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
> @@ -240,6 +240,62 @@ pmu {
> interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
> };
>
> + rpm: remoteproc-rpm {
> + compatible = "qcom,msm8936-rpm-proc", "qcom,rpm-proc";
> +
> + smd-edge {
> + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
> + qcom,ipc = <&apcs1_mbox 8 0>;
> + qcom,smd-edge = <15>;
> +
> + rpm_requests: rpm-requests {
> + compatible = "qcom,rpm-msm8936";
> + qcom,smd-channels = "rpm_requests";
> +
> + rpmcc: clock-controller {
> + compatible = "qcom,rpmcc-msm8936", "qcom,rpmcc";
> + #clock-cells = <1>;
> + clock-names = "xo";
> + clocks = <&xo_board>;
> + };
> +
> + rpmpd: power-controller {
> + compatible = "qcom,msm8939-rpmpd";
> + #power-domain-cells = <1>;
> + operating-points-v2 = <&rpmpd_opp_table>;
> +
> + rpmpd_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + rpmpd_opp_ret: opp1 {
> + opp-level = <1>;
> + };
> +
> + rpmpd_opp_svs_krait: opp2 {
> + opp-level = <2>;
> + };
> +
> + rpmpd_opp_svs_soc: opp3 {
> + opp-level = <3>;
> + };
> +
> + rpmpd_opp_nom: opp4 {
> + opp-level = <4>;
> + };
> +
> + rpmpd_opp_turbo: opp5 {
> + opp-level = <5>;
> + };
> +
> + rpmpd_opp_super_turbo: opp6 {
> + opp-level = <6>;
> + };
> + };
> + };
> + };
> + };
> + };
> +
> reserved-memory {
> #address-cells = <2>;
> #size-cells = <2>;
> @@ -308,62 +364,6 @@ mba_mem: mba@8cb00000 {
> };
> };
>
> - smd {
> - compatible = "qcom,smd";
> -
> - rpm {
> - interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
> - qcom,ipc = <&apcs1_mbox 8 0>;
> - qcom,smd-edge = <15>;
> -
> - rpm_requests: rpm-requests {
> - compatible = "qcom,rpm-msm8936";
> - qcom,smd-channels = "rpm_requests";
> -
> - rpmcc: clock-controller {
> - compatible = "qcom,rpmcc-msm8936", "qcom,rpmcc";
> - #clock-cells = <1>;
> - clock-names = "xo";
> - clocks = <&xo_board>;
> - };
> -
> - rpmpd: power-controller {
> - compatible = "qcom,msm8939-rpmpd";
> - #power-domain-cells = <1>;
> - operating-points-v2 = <&rpmpd_opp_table>;
> -
> - rpmpd_opp_table: opp-table {
> - compatible = "operating-points-v2";
> -
> - rpmpd_opp_ret: opp1 {
> - opp-level = <1>;
> - };
> -
> - rpmpd_opp_svs_krait: opp2 {
> - opp-level = <2>;
> - };
> -
> - rpmpd_opp_svs_soc: opp3 {
> - opp-level = <3>;
> - };
> -
> - rpmpd_opp_nom: opp4 {
> - opp-level = <4>;
> - };
> -
> - rpmpd_opp_turbo: opp5 {
> - opp-level = <5>;
> - };
> -
> - rpmpd_opp_super_turbo: opp6 {
> - opp-level = <6>;
> - };
> - };
> - };
> - };
> - };
> - };
> -
> smp2p-hexagon {
> compatible = "qcom,smp2p";
> qcom,smem = <435>, <428>;
> diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
> index 7d193a467819..4b2f02850a10 100644
> --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
> @@ -190,6 +190,74 @@ psci {
> method = "smc";
> };
>
> + rpm: remoteproc-rpm {
> + compatible = "qcom,msm8953-rpm-proc", "qcom,rpm-proc";
> +
> + smd-edge {
> + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
> + qcom,ipc = <&apcs 8 0>;
> + qcom,smd-edge = <15>;
> +
> + rpm_requests: rpm-requests {
> + compatible = "qcom,rpm-msm8953";
> + qcom,smd-channels = "rpm_requests";
> +
> + rpmcc: clock-controller {
> + compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc";
> + clocks = <&xo_board>;
> + clock-names = "xo";
> + #clock-cells = <1>;
> + };
> +
> + rpmpd: power-controller {
> + compatible = "qcom,msm8953-rpmpd";
> + #power-domain-cells = <1>;
> + operating-points-v2 = <&rpmpd_opp_table>;
> +
> + rpmpd_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + rpmpd_opp_ret: opp1 {
> + opp-level = <RPM_SMD_LEVEL_RETENTION>;
> + };
> +
> + rpmpd_opp_ret_plus: opp2 {
> + opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
> + };
> +
> + rpmpd_opp_min_svs: opp3 {
> + opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
> + };
> +
> + rpmpd_opp_low_svs: opp4 {
> + opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
> + };
> +
> + rpmpd_opp_svs: opp5 {
> + opp-level = <RPM_SMD_LEVEL_SVS>;
> + };
> +
> + rpmpd_opp_svs_plus: opp6 {
> + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
> + };
> +
> + rpmpd_opp_nom: opp7 {
> + opp-level = <RPM_SMD_LEVEL_NOM>;
> + };
> +
> + rpmpd_opp_nom_plus: opp8 {
> + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
> + };
> +
> + rpmpd_opp_turbo: opp9 {
> + opp-level = <RPM_SMD_LEVEL_TURBO>;
> + };
> + };
> + };
> + };
> + };
> + };
> +
> reserved-memory {
> #address-cells = <2>;
> #size-cells = <2>;
> @@ -263,74 +331,6 @@ rmtfs@f2d00000 {
> };
> };
>
> - smd {
> - compatible = "qcom,smd";
> -
> - rpm {
> - interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
> - qcom,ipc = <&apcs 8 0>;
> - qcom,smd-edge = <15>;
> -
> - rpm_requests: rpm-requests {
> - compatible = "qcom,rpm-msm8953";
> - qcom,smd-channels = "rpm_requests";
> -
> - rpmcc: clock-controller {
> - compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc";
> - clocks = <&xo_board>;
> - clock-names = "xo";
> - #clock-cells = <1>;
> - };
> -
> - rpmpd: power-controller {
> - compatible = "qcom,msm8953-rpmpd";
> - #power-domain-cells = <1>;
> - operating-points-v2 = <&rpmpd_opp_table>;
> -
> - rpmpd_opp_table: opp-table {
> - compatible = "operating-points-v2";
> -
> - rpmpd_opp_ret: opp1 {
> - opp-level = <RPM_SMD_LEVEL_RETENTION>;
> - };
> -
> - rpmpd_opp_ret_plus: opp2 {
> - opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
> - };
> -
> - rpmpd_opp_min_svs: opp3 {
> - opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
> - };
> -
> - rpmpd_opp_low_svs: opp4 {
> - opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
> - };
> -
> - rpmpd_opp_svs: opp5 {
> - opp-level = <RPM_SMD_LEVEL_SVS>;
> - };
> -
> - rpmpd_opp_svs_plus: opp6 {
> - opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
> - };
> -
> - rpmpd_opp_nom: opp7 {
> - opp-level = <RPM_SMD_LEVEL_NOM>;
> - };
> -
> - rpmpd_opp_nom_plus: opp8 {
> - opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
> - };
> -
> - rpmpd_opp_turbo: opp9 {
> - opp-level = <RPM_SMD_LEVEL_TURBO>;
> - };
> - };
> - };
> - };
> - };
> - };
> -
> smp2p-adsp {
> compatible = "qcom,smp2p";
> qcom,smem = <443>, <429>;
> diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
> index 753b9a2105ed..6f856562923f 100644
> --- a/arch/arm64/boot/dts/qcom/msm8976.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
> @@ -232,6 +232,82 @@ psci {
> method = "smc";
> };
>
> + rpm: remoteproc-rpm {
> + compatible = "qcom,msm8976-rpm-proc", "qcom,rpm-proc";
> +
> + smd-edge {
> + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
> + qcom,ipc = <&apcs 8 0>;
> + qcom,smd-edge = <15>;
> +
> + rpm_requests: rpm-requests {
> + compatible = "qcom,rpm-msm8976";
> + qcom,smd-channels = "rpm_requests";
> +
> + rpmcc: clock-controller {
> + compatible = "qcom,rpmcc-msm8976", "qcom,rpmcc";
> + clocks = <&xo_board>;
> + clock-names = "xo";
> + #clock-cells = <1>;
> + };
> +
> + rpmpd: power-controller {
> + compatible = "qcom,msm8976-rpmpd";
> + #power-domain-cells = <1>;
> + operating-points-v2 = <&rpmpd_opp_table>;
> +
> + rpmpd_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + rpmpd_opp_ret: opp1 {
> + opp-level = <RPM_SMD_LEVEL_RETENTION>;
> + };
> +
> + rpmpd_opp_ret_plus: opp2 {
> + opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
> + };
> +
> + rpmpd_opp_min_svs: opp3 {
> + opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
> + };
> +
> + rpmpd_opp_low_svs: opp4 {
> + opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
> + };
> +
> + rpmpd_opp_svs: opp5 {
> + opp-level = <RPM_SMD_LEVEL_SVS>;
> + };
> +
> + rpmpd_opp_svs_plus: opp6 {
> + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
> + };
> +
> + rpmpd_opp_nom: opp7 {
> + opp-level = <RPM_SMD_LEVEL_NOM>;
> + };
> +
> + rpmpd_opp_nom_plus: opp8 {
> + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
> + };
> +
> + rpmpd_opp_turbo: opp9 {
> + opp-level = <RPM_SMD_LEVEL_TURBO>;
> + };
> +
> + rpmpd_opp_turbo_no_cpr: opp10 {
> + opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
> + };
> +
> + rpmpd_opp_turbo_high: opp111 {
> + opp-level = <RPM_SMD_LEVEL_TURBO_HIGH>;
> + };
> + };
> + };
> + };
> + };
> + };
> +
> reserved-memory {
> #address-cells = <2>;
> #size-cells = <2>;
> @@ -346,82 +422,6 @@ wcnss_smp2p_in: slave-kernel {
> };
> };
>
> - smd {
> - compatible = "qcom,smd";
> -
> - rpm {
> - interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
> - qcom,ipc = <&apcs 8 0>;
> - qcom,smd-edge = <15>;
> -
> - rpm_requests: rpm-requests {
> - compatible = "qcom,rpm-msm8976";
> - qcom,smd-channels = "rpm_requests";
> -
> - rpmcc: clock-controller {
> - compatible = "qcom,rpmcc-msm8976", "qcom,rpmcc";
> - clocks = <&xo_board>;
> - clock-names = "xo";
> - #clock-cells = <1>;
> - };
> -
> - rpmpd: power-controller {
> - compatible = "qcom,msm8976-rpmpd";
> - #power-domain-cells = <1>;
> - operating-points-v2 = <&rpmpd_opp_table>;
> -
> - rpmpd_opp_table: opp-table {
> - compatible = "operating-points-v2";
> -
> - rpmpd_opp_ret: opp1 {
> - opp-level = <RPM_SMD_LEVEL_RETENTION>;
> - };
> -
> - rpmpd_opp_ret_plus: opp2 {
> - opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
> - };
> -
> - rpmpd_opp_min_svs: opp3 {
> - opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
> - };
> -
> - rpmpd_opp_low_svs: opp4 {
> - opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
> - };
> -
> - rpmpd_opp_svs: opp5 {
> - opp-level = <RPM_SMD_LEVEL_SVS>;
> - };
> -
> - rpmpd_opp_svs_plus: opp6 {
> - opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
> - };
> -
> - rpmpd_opp_nom: opp7 {
> - opp-level = <RPM_SMD_LEVEL_NOM>;
> - };
> -
> - rpmpd_opp_nom_plus: opp8 {
> - opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
> - };
> -
> - rpmpd_opp_turbo: opp9 {
> - opp-level = <RPM_SMD_LEVEL_TURBO>;
> - };
> -
> - rpmpd_opp_turbo_no_cpr: opp10 {
> - opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
> - };
> -
> - rpmpd_opp_turbo_high: opp111 {
> - opp-level = <RPM_SMD_LEVEL_TURBO_HIGH>;
> - };
> - };
> - };
> - };
> - };
> - };
> -
> smsm {
> compatible = "qcom,smsm";
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
> index 5a7923d7c62a..6168d0aeff57 100644
> --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
> @@ -178,6 +178,56 @@ psci {
> method = "hvc";
> };
>
> + rpm: remoteproc-rpm {
> + compatible = "qcom,msm8994-rpm-proc", "qcom,rpm-proc";
> +
> + smd-edge {
> + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
> + qcom,ipc = <&apcs 8 0>;
> + qcom,smd-edge = <15>;
> + qcom,remote-pid = <6>;
> +
> + rpm_requests: rpm-requests {
> + compatible = "qcom,rpm-msm8994";
> + qcom,smd-channels = "rpm_requests";
> +
> + rpmcc: clock-controller {
> + compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc";
> + #clock-cells = <1>;
> + };
> +
> + rpmpd: power-controller {
> + compatible = "qcom,msm8994-rpmpd";
> + #power-domain-cells = <1>;
> + operating-points-v2 = <&rpmpd_opp_table>;
> +
> + rpmpd_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + rpmpd_opp_ret: opp1 {
> + opp-level = <1>;
> + };
> + rpmpd_opp_svs_krait: opp2 {
> + opp-level = <2>;
> + };
> + rpmpd_opp_svs_soc: opp3 {
> + opp-level = <3>;
> + };
> + rpmpd_opp_nom: opp4 {
> + opp-level = <4>;
> + };
> + rpmpd_opp_turbo: opp5 {
> + opp-level = <5>;
> + };
> + rpmpd_opp_super_turbo: opp6 {
> + opp-level = <6>;
> + };
> + };
> + };
> + };
> + };
> + };
> +
> reserved-memory {
> #address-cells = <2>;
> #size-cells = <2>;
> @@ -237,55 +287,6 @@ reserved@6c00000 {
> };
> };
>
> - smd {
> - compatible = "qcom,smd";
> - rpm {
> - interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
> - qcom,ipc = <&apcs 8 0>;
> - qcom,smd-edge = <15>;
> - qcom,remote-pid = <6>;
> -
> - rpm_requests: rpm-requests {
> - compatible = "qcom,rpm-msm8994";
> - qcom,smd-channels = "rpm_requests";
> -
> - rpmcc: clock-controller {
> - compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc";
> - #clock-cells = <1>;
> - };
> -
> - rpmpd: power-controller {
> - compatible = "qcom,msm8994-rpmpd";
> - #power-domain-cells = <1>;
> - operating-points-v2 = <&rpmpd_opp_table>;
> -
> - rpmpd_opp_table: opp-table {
> - compatible = "operating-points-v2";
> -
> - rpmpd_opp_ret: opp1 {
> - opp-level = <1>;
> - };
> - rpmpd_opp_svs_krait: opp2 {
> - opp-level = <2>;
> - };
> - rpmpd_opp_svs_soc: opp3 {
> - opp-level = <3>;
> - };
> - rpmpd_opp_nom: opp4 {
> - opp-level = <4>;
> - };
> - rpmpd_opp_turbo: opp5 {
> - opp-level = <5>;
> - };
> - rpmpd_opp_super_turbo: opp6 {
> - opp-level = <6>;
> - };
> - };
> - };
> - };
> - };
> - };
> -
> smem {
> compatible = "qcom,smem";
> memory-region = <&smem_mem>;
>
next prev parent reply other threads:[~2023-06-05 19:07 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-05 7:08 [PATCH 00/14] Add dedicated device tree node for RPM processor/subsystem Stephan Gerhold
2023-06-05 7:08 ` [PATCH 01/14] dt-bindings soc: qcom: smd-rpm: Fix sort order Stephan Gerhold
2023-06-06 6:25 ` Krzysztof Kozlowski
2023-06-05 7:08 ` [PATCH 02/14] dt-bindings: soc: qcom: smd-rpm: Add MSM8909 to qcom,smd-channels Stephan Gerhold
2023-06-06 6:26 ` Krzysztof Kozlowski
2023-06-05 7:08 ` [PATCH 03/14] dt-bindings: soc: qcom: smd-rpm: Add some more compatibles Stephan Gerhold
2023-06-06 6:27 ` Krzysztof Kozlowski
2023-06-05 7:08 ` [PATCH 04/14] soc: qcom: smd-rpm: Match rpmsg channel instead of compatible Stephan Gerhold
2023-06-05 18:49 ` Konrad Dybcio
2023-06-05 7:08 ` [PATCH 05/14] dt-bindings: remoteproc: Add Qualcomm RPM processor/subsystem Stephan Gerhold
2023-06-05 8:33 ` Rob Herring
2023-06-05 9:16 ` Stephan Gerhold
2023-06-06 6:36 ` Krzysztof Kozlowski
2023-06-06 8:55 ` Stephan Gerhold
2023-06-07 8:32 ` Krzysztof Kozlowski
2023-06-05 7:08 ` [PATCH 06/14] dt-bindings: soc: qcom: smd-rpm: Use qcom,rpm-proc in example Stephan Gerhold
2023-06-05 8:33 ` Rob Herring
2023-06-05 9:20 ` Stephan Gerhold
2023-06-06 6:37 ` Krzysztof Kozlowski
2023-06-06 9:06 ` Stephan Gerhold
2023-06-06 9:17 ` Krzysztof Kozlowski
2023-06-05 7:08 ` [PATCH 07/14] dt-bindings: qcom: smd: Mark as deprecated Stephan Gerhold
2023-06-05 7:08 ` [PATCH 08/14] soc: qcom: smem: Add qcom_smem_is_available() Stephan Gerhold
2023-06-05 18:53 ` Konrad Dybcio
2023-06-05 19:13 ` Stephan Gerhold
2023-06-05 7:08 ` [PATCH 09/14] rpmsg: qcom_smd: Use qcom_smem_is_available() Stephan Gerhold
2023-06-05 18:56 ` Konrad Dybcio
2023-06-05 19:18 ` Stephan Gerhold
2023-06-05 19:45 ` Konrad Dybcio
2023-06-05 7:08 ` [PATCH 10/14] soc: qcom: Add RPM processor/subsystem driver Stephan Gerhold
2023-06-05 19:06 ` Konrad Dybcio
2023-06-05 19:51 ` Stephan Gerhold
2023-06-05 19:55 ` Konrad Dybcio
2023-06-05 20:31 ` kernel test robot
2023-06-05 7:08 ` [PATCH 11/14] arm64: dts: qcom: Add rpm-proc node for SMD platforms Stephan Gerhold
2023-06-05 19:07 ` Konrad Dybcio [this message]
2023-06-05 7:08 ` [PATCH 12/14] arm64: dts: qcom: Add rpm-proc node for GLINK gplatforms Stephan Gerhold
2023-06-05 19:43 ` Konrad Dybcio
2023-06-05 19:55 ` Stephan Gerhold
2023-06-05 7:08 ` [PATCH 13/14] ARM: dts: qcom: Add rpm-proc node for SMD platforms Stephan Gerhold
2023-06-05 7:08 ` [PATCH 14/14] ARM: dts: qcom: apq8064: Drop redundant /smd node Stephan Gerhold
2023-06-05 19:00 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=056c7b05-c41e-1e63-d94b-2d7b27356bc6@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=robh+dt@kernel.org \
--cc=stephan@gerhold.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.