Re: [PATCH v9 4/4] clk: qcom: add clock controller driver for qca8386/qca8084

From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: Luo Jie <quic_luoj@quicinc.com>,
	andersson@kernel.org, agross@kernel.org,
	konrad.dybcio@linaro.org, mturquette@baylibre.com,
	sboyd@kernel.org, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
	catalin.marinas@arm.com, will@kernel.org, p.zabel@pengutronix.de
Cc: linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	quic_srichara@quicinc.com
Subject: Re: [PATCH v9 4/4] clk: qcom: add clock controller driver for qca8386/qca8084
Date: Wed, 11 Oct 2023 11:25:58 +0100	[thread overview]
Message-ID: <10bcb0cc-19db-4914-bbc4-ef79c238a70d@linaro.org> (raw)
In-Reply-To: <20230923112105.18102-5-quic_luoj@quicinc.com>

On 23/09/2023 12:21, Luo Jie wrote:
> The clock controller driver of qca8386/qca8084 is registered
> as the MDIO device, the hardware register is accessed by MDIO bus
> that is normally used to access general PHY device, which is
> different from the current existed qcom clock controller drivers
> using ioremap to access hardware clock registers.

"nsscc-qca8k is accessed via an MDIO bus"

> MDIO bus is common utilized by both qca8386/qca8084 and other

commonly

> PHY devices, so the mutex lock mdio_bus->mdio_lock should be
> used instead of using the mutex lock of remap.
> 
> To access the hardware clock registers of qca8386/qca8084, there
> is special MDIO frame sequence(three MDIO read/write operations)
> need to be sent to device.

"there is a special MDIO frame sequence"

"which needs to be sent to the device"

the following indentation splat from checkpatch

CHECK: Alignment should match open parenthesis
#2071: FILE: drivers/clk/qcom/nsscc-qca8k.c:2004:
+		ret = __mdiobus_write(bus, switch_phy_id, (reg | 
QCA8K_REG_DATA_UPPER_16_BITS),
+				upper_16_bits(val));

CHECK: Alignment should match open parenthesis
#2131: FILE: drivers/clk/qcom/nsscc-qca8k.c:2064:
+static int qca8k_regmap_update_bits(void *context, unsigned int regaddr,
+		unsigned int mask, unsigned int value)

total: 0 errors, 1 warnings, 2 checks, 2162 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
       mechanically convert to the typical style using --fix or 
--fix-inplace.

0004-clk-qcom-add-clock-controller-driver-for-qca8386-qca.patch has 
style problems, please review.

Once fixed

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>