From: Charulatha V <charu@ti.com>
To: linux-omap@vger.kernel.org
Cc: khilman@deeprootsystems.com, paul@pwsan.com, tony@atomide.com,
rnayak@ti.com, p-basak2@ti.com, b-cousson@ti.com,
Charulatha V <charu@ti.com>
Subject: [PATCH:v4 02/13] OMAP: GPIO: Populate GPIO base address in omapxxxx.h
Date: Tue, 22 Jun 2010 20:31:45 +0530 [thread overview]
Message-ID: <1277218916-15213-3-git-send-email-charu@ti.com> (raw)
In-Reply-To: <1277218916-15213-2-git-send-email-charu@ti.com>
This patch populates omap24xx.h, omap34xx.h and omap44xx.h files
with SoC specific GPIO base addresses. This would be later used
while creating GPIO hwmod structures.
Signed-off-by: Charulatha V <charu@ti.com>
Signed-off-by: Basak, Partha <p-basak2@ti.com>
---
arch/arm/plat-omap/include/plat/omap24xx.h | 12 ++++++++++++
arch/arm/plat-omap/include/plat/omap34xx.h | 8 ++++++++
arch/arm/plat-omap/include/plat/omap44xx.h | 8 ++++++++
3 files changed, 28 insertions(+), 0 deletions(-)
diff --git a/arch/arm/plat-omap/include/plat/omap24xx.h b/arch/arm/plat-omap/include/plat/omap24xx.h
index 7055672..4406bbe 100644
--- a/arch/arm/plat-omap/include/plat/omap24xx.h
+++ b/arch/arm/plat-omap/include/plat/omap24xx.h
@@ -85,5 +85,17 @@
#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000)
#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000)
+/* GPIO controller*/
+#define OMAP242X_GPIO1_BASE (L4_24XX_BASE + 0x18000)
+#define OMAP242X_GPIO2_BASE (L4_24XX_BASE + 0x1a000)
+#define OMAP242X_GPIO3_BASE (L4_24XX_BASE + 0x1c000)
+#define OMAP242X_GPIO4_BASE (L4_24XX_BASE + 0x1e000)
+
+#define OMAP243X_GPIO1_BASE (L4_WK_243X_BASE + 0xC000)
+#define OMAP243X_GPIO2_BASE (L4_WK_243X_BASE + 0xE000)
+#define OMAP243X_GPIO3_BASE (L4_WK_243X_BASE + 0x10000)
+#define OMAP243X_GPIO4_BASE (L4_WK_243X_BASE + 0x12000)
+#define OMAP243X_GPIO5_BASE (L4_24XX_BASE + 0xB6000)
+
#endif /* __ASM_ARCH_OMAP2_H */
diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h
index 98fc8b4..53279b8 100644
--- a/arch/arm/plat-omap/include/plat/omap34xx.h
+++ b/arch/arm/plat-omap/include/plat/omap34xx.h
@@ -87,5 +87,13 @@
#define OMAP34XX_SEC_SHA1MD5_BASE (OMAP34XX_SEC_BASE + 0x23000)
#define OMAP34XX_SEC_AES_BASE (OMAP34XX_SEC_BASE + 0x25000)
+/* GPIO controller*/
+#define OMAP34XX_GPIO1_BASE (L4_WK_34XX_BASE + 0x10000)
+#define OMAP34XX_GPIO2_BASE (L4_PER_34XX_BASE + 0x50000)
+#define OMAP34XX_GPIO3_BASE (L4_PER_34XX_BASE + 0x52000)
+#define OMAP34XX_GPIO4_BASE (L4_PER_34XX_BASE + 0x54000)
+#define OMAP34XX_GPIO5_BASE (L4_PER_34XX_BASE + 0x56000)
+#define OMAP34XX_GPIO6_BASE (L4_PER_34XX_BASE + 0x58000)
+
#endif /* __ASM_ARCH_OMAP3_H */
diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h
index 8b3f12f..bec7d69 100644
--- a/arch/arm/plat-omap/include/plat/omap44xx.h
+++ b/arch/arm/plat-omap/include/plat/omap44xx.h
@@ -52,5 +52,13 @@
#define OMAP4_MMU1_BASE 0x55082000
#define OMAP4_MMU2_BASE 0x4A066000
+/* GPIO controller*/
+#define OMAP44XX_GPIO1_BASE (L4_WK_44XX_BASE + 0x10000)
+#define OMAP44XX_GPIO2_BASE (L4_PER_44XX_BASE + 0x55000)
+#define OMAP44XX_GPIO3_BASE (L4_PER_44XX_BASE + 0x57000)
+#define OMAP44XX_GPIO4_BASE (L4_PER_44XX_BASE + 0x59000)
+#define OMAP44XX_GPIO5_BASE (L4_PER_44XX_BASE + 0x5B000)
+#define OMAP44XX_GPIO6_BASE (L4_PER_44XX_BASE + 0x5D000)
+
#endif /* __ASM_ARCH_OMAP44XX_H */
--
1.6.3.3
next prev parent reply other threads:[~2010-06-22 15:01 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-22 15:01 [PATCH:v4 00/13] OMAP: GPIO: Implement GPIO in HWMOD way Charulatha V
2010-06-22 15:01 ` [PATCH:v4 01/13] OMAP: GPIO: Modify init() in preparation for platform device implementation Charulatha V
2010-06-22 15:01 ` Charulatha V [this message]
2010-06-22 15:01 ` [PATCH:v4 03/13] OMAP: GPIO: Include platform_data structure for GPIO Charulatha V
2010-06-22 15:01 ` [PATCH:v4 04/13] OMAP: GPIO: Introduce support for OMAP15xx chip GPIO init Charulatha V
2010-06-22 15:01 ` [PATCH:v4 05/13] OMAP: GPIO: Introduce support for OMAP16xx " Charulatha V
2010-06-22 15:01 ` [PATCH:v4 06/13] OMAP: GPIO: Introduce support for OMAP7xx " Charulatha V
2010-06-22 15:01 ` [PATCH:v4 07/13] OMAP: GPIO: add GPIO hwmods structures for OMAP3 Charulatha V
2010-06-22 15:01 ` [PATCH:v4 08/13] OMAP: GPIO: add GPIO hwmods structures for OMAP242X Charulatha V
2010-06-22 15:01 ` [PATCH:v4 09/13] OMAP: GPIO: add GPIO hwmods structures for OMAP243X Charulatha V
2010-06-22 15:01 ` [PATCH:v4 10/13] OMAP: GPIO: Add gpio dev_attr and correct clks in OMAP4 hwmod struct Charulatha V
2010-06-22 15:01 ` [PATCH:v4 11/13] OMAP: GPIO: Introduce support for OMAP2PLUS chip GPIO init Charulatha V
2010-06-22 15:01 ` [PATCH:v4 12/13] OMAP: GPIO: Implement GPIO as a platform device Charulatha V
2010-06-22 15:01 ` [PATCH:v4 13/13] OMAP: GPIO: Remove omap_gpio_init() Charulatha V
2010-06-25 23:36 ` [PATCH:v4 12/13] OMAP: GPIO: Implement GPIO as a platform device Kevin Hilman
2010-06-24 7:03 ` [PATCH:v4 03/13] OMAP: GPIO: Include platform_data structure for GPIO DebBarma, Tarun Kanti
2010-07-06 13:17 ` [PATCH:v4 00/13] OMAP: GPIO: Implement GPIO in HWMOD way Tony Lindgren
2010-07-27 11:47 ` Cousson, Benoit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1277218916-15213-3-git-send-email-charu@ti.com \
--to=charu@ti.com \
--cc=b-cousson@ti.com \
--cc=khilman@deeprootsystems.com \
--cc=linux-omap@vger.kernel.org \
--cc=p-basak2@ti.com \
--cc=paul@pwsan.com \
--cc=rnayak@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.