From: "Varadarajan, Charulatha" <charu@ti.com>
To: tony@atomide.com, linux-omap@vger.kernel.org
Cc: khilman@deeprootsystems.com, paul@pwsan.com, b-cousson@ti.com,
rnayak@ti.com, p-basak2@ti.com, "Varadarajan,
Charulatha" <charu@ti.com>
Subject: [PATCH v6 04/13] OMAP: GPIO: Introduce support for OMAP7xx chip GPIO init
Date: Sat, 18 Sep 2010 19:45:44 +0530 [thread overview]
Message-ID: <1284819353-8512-5-git-send-email-charu@ti.com> (raw)
In-Reply-To: <1284819353-8512-1-git-send-email-charu@ti.com>
This patch adds support for handling OMAP7xx specific gpio_init
by providing platform device data and doing device registration.
Signed-off-by: Charulatha V <charu@ti.com>
---
arch/arm/mach-omap1/gpio7xx.c | 274 +++++++++++++++++++++++++++++++++++++++++
1 files changed, 274 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-omap1/gpio7xx.c
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
new file mode 100644
index 0000000..48c7f13
--- /dev/null
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -0,0 +1,274 @@
+/*
+ * OMAP7XX-specific gpio code
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * Author:
+ * Charulatha V <charu@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#define OMAP7XX_GPIO1_BASE 0xfffbc000
+#define OMAP7XX_GPIO2_BASE 0xfffbc800
+#define OMAP7XX_GPIO3_BASE 0xfffbd000
+#define OMAP7XX_GPIO4_BASE 0xfffbd800
+#define OMAP7XX_GPIO5_BASE 0xfffbe000
+#define OMAP7XX_GPIO6_BASE 0xfffbe800
+#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE
+
+static struct omap_gpio_dev_attr omap7xx_gpio_attr = {
+ .bank_width = 32,
+};
+
+/*
+ * OMAP7XX MPU GPIO interface data
+ */
+static struct __initdata resource omap7xx_mpu_gpio_resources[] = {
+ {
+ .start = OMAP1_MPUIO_VBASE,
+ .end = OMAP1_MPUIO_VBASE + SZ_2K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_7XX_MPUIO,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
+ .virtual_irq_start = IH_MPUIO_BASE,
+ .bank_type = METHOD_MPUIO,
+ .gpio_attr = &omap7xx_gpio_attr,
+};
+
+static struct __initdata platform_device omap7xx_mpu_gpio = {
+ .name = "omap-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &omap7xx_mpu_gpio_config,
+ },
+ .num_resources = ARRAY_SIZE(omap7xx_mpu_gpio_resources),
+ .resource = omap7xx_mpu_gpio_resources,
+};
+
+/*
+ * OMAP7XX GPIO1 interface data
+ */
+static struct __initdata resource omap7xx_gpio1_resources[] = {
+ {
+ .start = OMAP7XX_GPIO1_BASE,
+ .end = OMAP7XX_GPIO1_BASE + SZ_2K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_7XX_GPIO_BANK1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
+ .virtual_irq_start = IH_GPIO_BASE,
+ .bank_type = METHOD_GPIO_7XX,
+ .gpio_attr = &omap7xx_gpio_attr,
+};
+
+static struct __initdata platform_device omap7xx_gpio1 = {
+ .name = "omap-gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &omap7xx_gpio1_config,
+ },
+ .num_resources = ARRAY_SIZE(omap7xx_gpio1_resources),
+ .resource = omap7xx_gpio1_resources,
+};
+
+/*
+ * OMAP7XX GPIO2 interface data
+ */
+static struct __initdata resource omap7xx_gpio2_resources[] = {
+ {
+ .start = OMAP7XX_GPIO2_BASE,
+ .end = OMAP7XX_GPIO2_BASE + SZ_2K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_7XX_GPIO_BANK2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
+ .virtual_irq_start = IH_GPIO_BASE + 32,
+ .bank_type = METHOD_GPIO_7XX,
+ .gpio_attr = &omap7xx_gpio_attr,
+};
+
+static struct __initdata platform_device omap7xx_gpio2 = {
+ .name = "omap-gpio",
+ .id = 2,
+ .dev = {
+ .platform_data = &omap7xx_gpio2_config,
+ },
+ .num_resources = ARRAY_SIZE(omap7xx_gpio2_resources),
+ .resource = omap7xx_gpio2_resources,
+};
+
+/*
+ * OMAP7XX GPIO3 interface data
+ */
+static struct __initdata resource omap7xx_gpio3_resources[] = {
+ {
+ .start = OMAP7XX_GPIO3_BASE,
+ .end = OMAP7XX_GPIO3_BASE + SZ_2K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_7XX_GPIO_BANK3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
+ .virtual_irq_start = IH_GPIO_BASE + 64,
+ .bank_type = METHOD_GPIO_7XX,
+ .gpio_attr = &omap7xx_gpio_attr,
+};
+
+static struct __initdata platform_device omap7xx_gpio3 = {
+ .name = "omap-gpio",
+ .id = 3,
+ .dev = {
+ .platform_data = &omap7xx_gpio3_config,
+ },
+ .num_resources = ARRAY_SIZE(omap7xx_gpio3_resources),
+ .resource = omap7xx_gpio3_resources,
+};
+
+/*
+ * OMAP7XX GPIO4 interface data
+ */
+static struct __initdata resource omap7xx_gpio4_resources[] = {
+ {
+ .start = OMAP7XX_GPIO4_BASE,
+ .end = OMAP7XX_GPIO4_BASE + SZ_2K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_7XX_GPIO_BANK4,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
+ .virtual_irq_start = IH_GPIO_BASE + 96,
+ .bank_type = METHOD_GPIO_7XX,
+ .gpio_attr = &omap7xx_gpio_attr,
+};
+
+static struct __initdata platform_device omap7xx_gpio4 = {
+ .name = "omap-gpio",
+ .id = 4,
+ .dev = {
+ .platform_data = &omap7xx_gpio4_config,
+ },
+ .num_resources = ARRAY_SIZE(omap7xx_gpio4_resources),
+ .resource = omap7xx_gpio4_resources,
+};
+
+/*
+ * OMAP7XX GPIO5 interface data
+ */
+static struct __initdata resource omap7xx_gpio5_resources[] = {
+ {
+ .start = OMAP7XX_GPIO5_BASE,
+ .end = OMAP7XX_GPIO5_BASE + SZ_2K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_7XX_GPIO_BANK5,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
+ .virtual_irq_start = IH_GPIO_BASE + 128,
+ .bank_type = METHOD_GPIO_7XX,
+ .gpio_attr = &omap7xx_gpio_attr,
+};
+
+static struct __initdata platform_device omap7xx_gpio5 = {
+ .name = "omap-gpio",
+ .id = 5,
+ .dev = {
+ .platform_data = &omap7xx_gpio5_config,
+ },
+ .num_resources = ARRAY_SIZE(omap7xx_gpio5_resources),
+ .resource = omap7xx_gpio5_resources,
+};
+
+/*
+ * OMAP7XX GPIO6 interface data
+ */
+static struct __initdata resource omap7xx_gpio6_resources[] = {
+ {
+ .start = OMAP7XX_GPIO6_BASE,
+ .end = OMAP7XX_GPIO6_BASE + SZ_2K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_7XX_GPIO_BANK6,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
+ .virtual_irq_start = IH_GPIO_BASE + 160,
+ .bank_type = METHOD_GPIO_7XX,
+ .gpio_attr = &omap7xx_gpio_attr,
+};
+
+static struct __initdata platform_device omap7xx_gpio6 = {
+ .name = "omap-gpio",
+ .id = 6,
+ .dev = {
+ .platform_data = &omap7xx_gpio6_config,
+ },
+ .num_resources = ARRAY_SIZE(omap7xx_gpio6_resources),
+ .resource = omap7xx_gpio6_resources,
+};
+
+static struct __initdata platform_device * omap7xx_gpio_dev[] = {
+ &omap7xx_mpu_gpio,
+ &omap7xx_gpio1,
+ &omap7xx_gpio2,
+ &omap7xx_gpio3,
+ &omap7xx_gpio4,
+ &omap7xx_gpio5,
+ &omap7xx_gpio6,
+};
+
+/*
+ * omap7xx_gpio_init needs to be done before
+ * machine_init functions access gpio APIs.
+ * Hence omap7xx_gpio_init is a postcore_initcall.
+ */
+static int __init omap7xx_gpio_init(void)
+{
+ int i;
+
+ if (!cpu_is_omap7xx())
+ return -EINVAL;
+
+ for (i = 0; i < ARRAY_SIZE(omap7xx_gpio_dev); i++)
+ platform_device_register(omap7xx_gpio_dev[i]);
+
+ gpio_bank_count = ARRAY_SIZE(omap7xx_gpio_dev);
+
+ return 0;
+}
+postcore_initcall(omap7xx_gpio_init);
--
1.7.0.4
next prev parent reply other threads:[~2010-09-18 14:16 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-18 14:15 [PATCH v6 00/13] OMAP: GPIO: Implement GPIO in hwmod way Varadarajan, Charulatha
2010-09-18 14:15 ` [PATCH v6 01/13] OMAP: GPIO: Modify init() in preparation for platform device implementation Varadarajan, Charulatha
2010-09-18 14:15 ` [PATCH v6 02/13] OMAP: GPIO: Introduce support for OMAP15xx chip GPIO init Varadarajan, Charulatha
2010-09-18 14:15 ` [PATCH v6 03/13] OMAP: GPIO: Introduce support for OMAP16xx " Varadarajan, Charulatha
2010-09-18 14:15 ` Varadarajan, Charulatha [this message]
2010-09-18 14:15 ` [PATCH v6 05/13] OMAP2420: hwmod data: Add GPIO Varadarajan, Charulatha
2010-09-18 14:15 ` [PATCH v6 06/13] OMAP2430: " Varadarajan, Charulatha
2010-09-18 14:15 ` [PATCH v6 07/13] OMAP3: " Varadarajan, Charulatha
2010-09-21 23:22 ` Kevin Hilman
2010-09-18 14:15 ` [PATCH v6 08/13] OMAP4: " Varadarajan, Charulatha
2010-09-18 14:15 ` [PATCH v6 09/13] OMAP2PLUS: GPIO: use omap_device_build for device registration Varadarajan, Charulatha
2010-09-18 14:15 ` [PATCH v6 10/13] OMAP: GPIO: Implement GPIO as a platform device Varadarajan, Charulatha
2010-09-18 14:15 ` [PATCH v6 11/13] OMAP: GPIO: Make gpio_context as part of gpio_bank structure Varadarajan, Charulatha
2010-09-18 14:15 ` [PATCH v6 12/13] OMAP: GPIO: Use dev_pm_ops instead of sys_dev_class Varadarajan, Charulatha
2010-09-18 14:15 ` [PATCH v6 13/13] OMAP: GPIO: Remove omap_gpio_init() Varadarajan, Charulatha
2010-09-21 0:07 ` [PATCH v6 00/13] OMAP: GPIO: Implement GPIO in hwmod way Kevin Hilman
2010-09-21 14:06 ` Varadarajan, Charulatha
2010-09-21 17:57 ` Kevin Hilman
2010-09-21 23:34 ` Kevin Hilman
2010-09-22 0:18 ` Kevin Hilman
2010-09-22 14:27 ` Varadarajan, Charulatha
2010-09-22 14:33 ` Kevin Hilman
2010-09-22 23:11 ` Kevin Hilman
2010-09-24 15:12 ` Varadarajan, Charulatha
2010-09-24 18:37 ` Kevin Hilman
2010-09-25 11:59 ` Varadarajan, Charulatha
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1284819353-8512-5-git-send-email-charu@ti.com \
--to=charu@ti.com \
--cc=b-cousson@ti.com \
--cc=khilman@deeprootsystems.com \
--cc=linux-omap@vger.kernel.org \
--cc=p-basak2@ti.com \
--cc=paul@pwsan.com \
--cc=rnayak@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.