From: zhouqiao@marvell.com (Qiao Zhou)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] rtc: add rtc support to 88PM80X PMIC
Date: Thu, 5 Jul 2012 19:56:21 +0800 [thread overview]
Message-ID: <1341489382-4994-4-git-send-email-zhouqiao@marvell.com> (raw)
In-Reply-To: <1341489382-4994-1-git-send-email-zhouqiao@marvell.com>
add rtc driver for MARVELL 88PM80X PMIC and enable rtc function.
Signed-off-by: Qiao Zhou <zhouqiao@marvell.com>
---
drivers/rtc/Kconfig | 10 ++
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-88pm80x.c | 366 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 377 insertions(+), 0 deletions(-)
create mode 100644 drivers/rtc/rtc-88pm80x.c
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 08cbdb9..3f469b3 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -135,6 +135,16 @@ config RTC_DRV_88PM860X
This driver can also be built as a module. If so, the module
will be called rtc-88pm860x.
+config RTC_DRV_88PM80X
+ tristate "Marvell 88PM80x"
+ depends on RTC_CLASS && I2C && MFD_88PM805
+ help
+ If you say yes here you get support for RTC function in Marvell
+ 88PM80x chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-88pm80x.
+
config RTC_DRV_DS1307
tristate "Dallas/Maxim DS1307/37/38/39/40, ST M41T00, EPSON RX-8025"
help
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 2973921..0d5b2b6 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -16,6 +16,7 @@ rtc-core-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o
# Keep the list ordered.
obj-$(CONFIG_RTC_DRV_88PM860X) += rtc-88pm860x.o
+obj-$(CONFIG_RTC_DRV_88PM80X) += rtc-88pm80x.o
obj-$(CONFIG_RTC_DRV_AB3100) += rtc-ab3100.o
obj-$(CONFIG_RTC_DRV_AB8500) += rtc-ab8500.o
obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o
diff --git a/drivers/rtc/rtc-88pm80x.c b/drivers/rtc/rtc-88pm80x.c
new file mode 100644
index 0000000..d443157
--- /dev/null
+++ b/drivers/rtc/rtc-88pm80x.c
@@ -0,0 +1,366 @@
+/*
+ * Real Time Clock driver for Marvell 88PM80x PMIC
+ *
+ * Copyright (c) 2012 Marvell International Ltd.
+ * Wenzeng Chen<wzch@marvell.com>
+ * Qiao Zhou <zhouqiao@marvell.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/88pm80x.h>
+#include <linux/rtc.h>
+
+struct pm80x_rtc_info {
+ struct pm80x_chip *chip;
+ struct regmap *map;
+ struct rtc_device *rtc_dev;
+ struct device *dev;
+ struct delayed_work calib_work;
+
+ int irq;
+ int vrtc;
+};
+
+static int pm80x_rtc_read_time(struct device *dev, struct rtc_time *tm);
+
+static irqreturn_t rtc_update_handler(int irq, void *data)
+{
+ struct pm80x_rtc_info *info = (struct pm80x_rtc_info *)data;
+ int mask;
+
+ mask = PM800_ALARM | PM800_ALARM_WAKEUP;
+ regmap_update_bits(info->map, PM800_RTC_CONTROL, mask | PM800_ALARM1_EN,
+ mask);
+ rtc_update_irq(info->rtc_dev, 1, RTC_AF);
+ return IRQ_HANDLED;
+}
+
+static int pm80x_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+ struct pm80x_rtc_info *info = dev_get_drvdata(dev);
+
+ if (enabled)
+ regmap_update_bits(info->map, PM800_RTC_CONTROL,
+ PM800_ALARM1_EN, PM800_ALARM1_EN);
+ else
+ regmap_update_bits(info->map, PM800_RTC_CONTROL,
+ PM800_ALARM1_EN, 0);
+ return 0;
+}
+
+/*
+ * Calculate the next alarm time given the requested alarm time mask
+ * and the current time.
+ */
+static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now,
+ struct rtc_time *alrm)
+{
+ unsigned long next_time;
+ unsigned long now_time;
+
+ next->tm_year = now->tm_year;
+ next->tm_mon = now->tm_mon;
+ next->tm_mday = now->tm_mday;
+ next->tm_hour = alrm->tm_hour;
+ next->tm_min = alrm->tm_min;
+ next->tm_sec = alrm->tm_sec;
+
+ rtc_tm_to_time(now, &now_time);
+ rtc_tm_to_time(next, &next_time);
+
+ if (next_time < now_time) {
+ /* Advance one day */
+ next_time += 60 * 60 * 24;
+ rtc_time_to_tm(next_time, next);
+ }
+}
+
+static int pm80x_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct pm80x_rtc_info *info = dev_get_drvdata(dev);
+ unsigned char buf[4];
+ unsigned long ticks, base, data;
+ regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4);
+ base = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]);
+
+ /* load 32-bit read-only counter */
+ regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4);
+ data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ ticks = base + data;
+ dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
+ base, data, ticks);
+ rtc_time_to_tm(ticks, tm);
+ return 0;
+}
+
+static int pm80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct pm80x_rtc_info *info = dev_get_drvdata(dev);
+ unsigned char buf[4];
+ unsigned long ticks, base, data;
+ if ((tm->tm_year < 70) || (tm->tm_year > 138)) {
+ dev_dbg(info->dev,
+ "Set time %d out of range. Please set time between 1970 to 2038.\n",
+ 1900 + tm->tm_year);
+ return -EINVAL;
+ }
+ rtc_tm_to_time(tm, &ticks);
+
+ /* load 32-bit read-only counter */
+ regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4);
+ data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ base = ticks - data;
+ dev_dbg(info->dev, "set base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
+ base, data, ticks);
+ buf[0] = base & 0xFF;
+ buf[1] = (base >> 8) & 0xFF;
+ buf[2] = (base >> 16) & 0xFF;
+ buf[3] = (base >> 24) & 0xFF;
+ regmap_raw_write(info->map, PM800_RTC_EXPIRE2_1, buf, 4);
+
+ return 0;
+}
+
+static int pm80x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct pm80x_rtc_info *info = dev_get_drvdata(dev);
+ unsigned char buf[4];
+ unsigned long ticks, base, data;
+ int ret;
+
+ regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4);
+ base = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]);
+
+ regmap_raw_read(info->map, PM800_RTC_EXPIRE1_1, buf, 4);
+ data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ ticks = base + data;
+ dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
+ base, data, ticks);
+
+ rtc_time_to_tm(ticks, &alrm->time);
+ regmap_read(info->map, PM800_RTC_CONTROL, &ret);
+ alrm->enabled = (ret & PM800_ALARM1_EN) ? 1 : 0;
+ alrm->pending = (ret & (PM800_ALARM | PM800_ALARM_WAKEUP)) ? 1 : 0;
+ return 0;
+}
+
+static int pm80x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct pm80x_rtc_info *info = dev_get_drvdata(dev);
+ struct rtc_time now_tm, alarm_tm;
+ unsigned long ticks, base, data;
+ unsigned char buf[4];
+ int mask;
+
+ regmap_update_bits(info->map, PM800_RTC_CONTROL, PM800_ALARM1_EN, 0);
+
+ regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4);
+ base = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]);
+
+ /* load 32-bit read-only counter */
+ regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4);
+ data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ ticks = base + data;
+ dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
+ base, data, ticks);
+
+ rtc_time_to_tm(ticks, &now_tm);
+ dev_dbg(info->dev, "%s, now time : %lu\n", __func__, ticks);
+ rtc_next_alarm_time(&alarm_tm, &now_tm, &alrm->time);
+ /* get new ticks for alarm in 24 hours */
+ rtc_tm_to_time(&alarm_tm, &ticks);
+ dev_dbg(info->dev, "%s, alarm time: %lu\n", __func__, ticks);
+ data = ticks - base;
+
+ buf[0] = data & 0xff;
+ buf[1] = (data >> 8) & 0xff;
+ buf[2] = (data >> 16) & 0xff;
+ buf[3] = (data >> 24) & 0xff;
+ regmap_raw_write(info->map, PM800_RTC_EXPIRE1_1, buf, 4);
+ if (alrm->enabled) {
+ mask = PM800_ALARM | PM800_ALARM_WAKEUP | PM800_ALARM1_EN;
+ regmap_update_bits(info->map, PM800_RTC_CONTROL, mask, mask);
+ } else {
+ mask = PM800_ALARM | PM800_ALARM_WAKEUP | PM800_ALARM1_EN;
+ regmap_update_bits(info->map, PM800_RTC_CONTROL, mask,
+ PM800_ALARM | PM800_ALARM_WAKEUP);
+ }
+ return 0;
+}
+
+static const struct rtc_class_ops pm80x_rtc_ops = {
+ .read_time = pm80x_rtc_read_time,
+ .set_time = pm80x_rtc_set_time,
+ .read_alarm = pm80x_rtc_read_alarm,
+ .set_alarm = pm80x_rtc_set_alarm,
+ .alarm_irq_enable = pm80x_rtc_alarm_irq_enable,
+};
+
+#ifdef CONFIG_PM
+static int pm80x_rtc_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct pm80x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+ if (device_may_wakeup(dev))
+ chip->wu_flag |= (1 << PM800_IRQ_RTC);
+
+ return 0;
+}
+
+static int pm80x_rtc_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct pm80x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+ if (device_may_wakeup(dev))
+ chip->wu_flag &= ~(1 << PM800_IRQ_RTC);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pm80x_rtc_pm_ops, pm80x_rtc_suspend, pm80x_rtc_resume);
+
+static int __devinit pm80x_rtc_probe(struct platform_device *pdev)
+{
+ struct pm80x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+ struct pm80x_platform_data *pm80x_pdata;
+ struct pm80x_rtc_pdata *pdata = NULL;
+ struct pm80x_rtc_info *info;
+ struct rtc_time tm;
+ unsigned long ticks = 0;
+ int ret;
+
+ pdata = pdev->dev.platform_data;
+ if (pdata == NULL)
+ dev_warn(&pdev->dev, "No platform data!\n");
+
+ info =
+ devm_kzalloc(&pdev->dev, sizeof(struct pm80x_rtc_info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+ info->irq = platform_get_irq(pdev, 0);
+ if (info->irq < 0) {
+ dev_err(&pdev->dev, "No IRQ resource!\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ info->chip = chip;
+ info->map = chip->regmap;
+ if (!info->map) {
+ dev_err(&pdev->dev, "no regmap!\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ info->dev = &pdev->dev;
+ dev_set_drvdata(&pdev->dev, info);
+
+ ret = pm80x_request_irq(chip, info->irq, rtc_update_handler,
+ IRQF_ONESHOT, "rtc", info);
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
+ info->irq, ret);
+ goto out;
+ }
+
+ ret = pm80x_rtc_read_time(&pdev->dev, &tm);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to read initial time.\n");
+ goto out_rtc;
+ }
+ if ((tm.tm_year < 70) || (tm.tm_year > 138)) {
+ tm.tm_year = 70;
+ tm.tm_mon = 0;
+ tm.tm_mday = 1;
+ tm.tm_hour = 0;
+ tm.tm_min = 0;
+ tm.tm_sec = 0;
+ ret = pm80x_rtc_set_time(&pdev->dev, &tm);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to set initial time.\n");
+ goto out_rtc;
+ }
+ }
+ rtc_tm_to_time(&tm, &ticks);
+
+ info->rtc_dev = rtc_device_register("88pm80x-rtc", &pdev->dev,
+ &pm80x_rtc_ops, THIS_MODULE);
+ ret = PTR_ERR(info->rtc_dev);
+ if (IS_ERR(info->rtc_dev)) {
+ dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
+ goto out_rtc;
+ }
+ /*
+ * enable internal XO instead of internal 3.25MHz clock since it can
+ * free running in PMIC power-down state.
+ */
+ regmap_update_bits(info->map, PM800_RTC_CONTROL, PM800_RTC1_USE_XO,
+ PM800_RTC1_USE_XO);
+
+ if (pdev->dev.parent->platform_data) {
+ pm80x_pdata = pdev->dev.parent->platform_data;
+ pdata = pm80x_pdata->rtc;
+ if (pdata)
+ info->rtc_dev->dev.platform_data = &pdata->rtc_wakeup;
+ }
+
+ device_init_wakeup(&pdev->dev, 1);
+
+ return 0;
+out_rtc:
+ pm80x_free_irq(chip, info->irq, info);
+out:
+ devm_kfree(&pdev->dev, info);
+ return ret;
+}
+
+static int __devexit pm80x_rtc_remove(struct platform_device *pdev)
+{
+ struct pm80x_rtc_info *info = platform_get_drvdata(pdev);
+ platform_set_drvdata(pdev, NULL);
+ rtc_device_unregister(info->rtc_dev);
+ pm80x_free_irq(info->chip, info->irq, info);
+ devm_kfree(&pdev->dev, info);
+ return 0;
+}
+
+static struct platform_driver pm80x_rtc_driver = {
+ .driver = {
+ .name = "88pm80x-rtc",
+ .owner = THIS_MODULE,
+ .pm = &pm80x_rtc_pm_ops,
+ },
+ .probe = pm80x_rtc_probe,
+ .remove = __devexit_p(pm80x_rtc_remove),
+};
+
+module_platform_driver(pm80x_rtc_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Marvell 88PM80x RTC driver");
+MODULE_AUTHOR("Qiao Zhou <zhouqiao@marvell.com>");
+MODULE_ALIAS("platform:88pm80x-rtc");
--
1.7.0.4
next prev parent reply other threads:[~2012-07-05 11:56 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-05 11:56 [PATCH 0/4 V3.1] add 88pm80x mfd driver Qiao Zhou
2012-07-05 11:56 ` [PATCH 1/4] mfd: support 88pm80x in 80x driver Qiao Zhou
2012-07-05 11:56 ` [PATCH 2/4] mfd: workaround: add companion chip in 88pm80x Qiao Zhou
2012-07-05 11:56 ` Qiao Zhou [this message]
2012-07-05 11:56 ` [PATCH 4/4] input: add onkey support to 88PM80X PMIC Qiao Zhou
-- strict thread matches above, loose matches on Subject: below --
2012-07-09 6:13 [PATCH 0/4 V4] add 88pm80x mfd driver Qiao Zhou
[not found] ` <1341814418-13300-1-git-send-email-zhouqiao-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>
2012-07-09 6:13 ` [PATCH 3/4] rtc: add rtc support to 88PM80X PMIC Qiao Zhou
2012-07-09 6:13 ` Qiao Zhou
2012-07-06 6:48 [PATCH 0/4 V4] add 88pm80x mfd driver Qiao Zhou
[not found] ` <1341557330-24413-1-git-send-email-zhouqiao-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>
2012-07-06 6:48 ` [PATCH 3/4] rtc: add rtc support to 88PM80X PMIC Qiao Zhou
2012-07-06 6:48 ` Qiao Zhou
2012-07-05 11:07 [PATCH 0/4 V3] add 88pm80x mfd driver Qiao Zhou
[not found] ` <1341486425-697-1-git-send-email-zhouqiao-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>
2012-07-05 11:07 ` [PATCH 3/4] rtc: add rtc support to 88PM80X PMIC Qiao Zhou
2012-07-05 11:07 ` Qiao Zhou
2012-07-04 8:55 [PATCH 0/4 V2] add 88pm80x mfd driver Qiao Zhou
[not found] ` <1341392115-9425-1-git-send-email-zhouqiao-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>
2012-07-04 8:55 ` [PATCH 3/4] rtc: add rtc support to 88PM80X PMIC Qiao Zhou
2012-07-04 8:55 ` Qiao Zhou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1341489382-4994-4-git-send-email-zhouqiao@marvell.com \
--to=zhouqiao@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.