From: Daniel Vetter <daniel.vetter@ffwll.ch>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Subject: [PATCH 5/6] drm/i915: don't save/restore irq regs for kms
Date: Thu, 11 Oct 2012 20:08:27 +0200 [thread overview]
Message-ID: <1349978908-7687-6-git-send-email-daniel.vetter@ffwll.ch> (raw)
In-Reply-To: <1349978908-7687-1-git-send-email-daniel.vetter@ffwll.ch>
We already call drm_irq_install/uninstall at the right time, which
will set up the irq registers with the correct values (through the
preinstall hooks).
For kms this is at best harmless, in the worst case we get an
interrupt when we don't really expect it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
drivers/gpu/drm/i915/i915_suspend.c | 56 ++++++++++++++++++++-----------------
1 file changed, 30 insertions(+), 26 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index eaf1e4a..44893be 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -818,20 +818,22 @@ int i915_save_state(struct drm_device *dev)
i915_save_display(dev);
- /* Interrupt state */
- if (HAS_PCH_SPLIT(dev)) {
- dev_priv->saveDEIER = I915_READ(DEIER);
- dev_priv->saveDEIMR = I915_READ(DEIMR);
- dev_priv->saveGTIER = I915_READ(GTIER);
- dev_priv->saveGTIMR = I915_READ(GTIMR);
- dev_priv->saveFDI_RXA_IMR = I915_READ(_FDI_RXA_IMR);
- dev_priv->saveFDI_RXB_IMR = I915_READ(_FDI_RXB_IMR);
- dev_priv->saveMCHBAR_RENDER_STANDBY =
- I915_READ(RSTDBYCTL);
- dev_priv->savePCH_PORT_HOTPLUG = I915_READ(PCH_PORT_HOTPLUG);
- } else {
- dev_priv->saveIER = I915_READ(IER);
- dev_priv->saveIMR = I915_READ(IMR);
+ if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+ /* Interrupt state */
+ if (HAS_PCH_SPLIT(dev)) {
+ dev_priv->saveDEIER = I915_READ(DEIER);
+ dev_priv->saveDEIMR = I915_READ(DEIMR);
+ dev_priv->saveGTIER = I915_READ(GTIER);
+ dev_priv->saveGTIMR = I915_READ(GTIMR);
+ dev_priv->saveFDI_RXA_IMR = I915_READ(_FDI_RXA_IMR);
+ dev_priv->saveFDI_RXB_IMR = I915_READ(_FDI_RXB_IMR);
+ dev_priv->saveMCHBAR_RENDER_STANDBY =
+ I915_READ(RSTDBYCTL);
+ dev_priv->savePCH_PORT_HOTPLUG = I915_READ(PCH_PORT_HOTPLUG);
+ } else {
+ dev_priv->saveIER = I915_READ(IER);
+ dev_priv->saveIMR = I915_READ(IMR);
+ }
}
intel_disable_gt_powersave(dev);
@@ -869,18 +871,20 @@ int i915_restore_state(struct drm_device *dev)
i915_restore_display(dev);
- /* Interrupt state */
- if (HAS_PCH_SPLIT(dev)) {
- I915_WRITE(DEIER, dev_priv->saveDEIER);
- I915_WRITE(DEIMR, dev_priv->saveDEIMR);
- I915_WRITE(GTIER, dev_priv->saveGTIER);
- I915_WRITE(GTIMR, dev_priv->saveGTIMR);
- I915_WRITE(_FDI_RXA_IMR, dev_priv->saveFDI_RXA_IMR);
- I915_WRITE(_FDI_RXB_IMR, dev_priv->saveFDI_RXB_IMR);
- I915_WRITE(PCH_PORT_HOTPLUG, dev_priv->savePCH_PORT_HOTPLUG);
- } else {
- I915_WRITE(IER, dev_priv->saveIER);
- I915_WRITE(IMR, dev_priv->saveIMR);
+ if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+ /* Interrupt state */
+ if (HAS_PCH_SPLIT(dev)) {
+ I915_WRITE(DEIER, dev_priv->saveDEIER);
+ I915_WRITE(DEIMR, dev_priv->saveDEIMR);
+ I915_WRITE(GTIER, dev_priv->saveGTIER);
+ I915_WRITE(GTIMR, dev_priv->saveGTIMR);
+ I915_WRITE(_FDI_RXA_IMR, dev_priv->saveFDI_RXA_IMR);
+ I915_WRITE(_FDI_RXB_IMR, dev_priv->saveFDI_RXB_IMR);
+ I915_WRITE(PCH_PORT_HOTPLUG, dev_priv->savePCH_PORT_HOTPLUG);
+ } else {
+ I915_WRITE(IER, dev_priv->saveIER);
+ I915_WRITE(IMR, dev_priv->saveIMR);
+ }
}
/* Cache mode state */
--
1.7.11.2
next prev parent reply other threads:[~2012-10-11 19:16 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-11 18:08 [PATCH 0/6] reduce register save/restoring accross suspend/resume Daniel Vetter
2012-10-11 18:08 ` [PATCH 1/6] drm/i915/crt: don't set HOTPLUG bits on !PCH Daniel Vetter
2012-10-12 2:47 ` Paulo Zanoni
2012-10-12 8:45 ` Daniel Vetter
2012-10-12 17:17 ` Paulo Zanoni
2012-10-12 17:26 ` Daniel Vetter
2012-10-17 21:31 ` Paulo Zanoni
2012-10-11 18:08 ` [PATCH 2/6] drm/i915/crt: explicitly set up HOTPLUG_BITS on resume Daniel Vetter
2012-10-17 21:42 ` Paulo Zanoni
2012-10-11 18:08 ` [PATCH 3/6] drm/i915: don't save/restor ADPA for kms Daniel Vetter
2012-10-17 21:49 ` Paulo Zanoni
2012-10-18 12:34 ` Daniel Vetter
2012-10-11 18:08 ` [PATCH 4/6] drm/i915: don't save/restore DP regs " Daniel Vetter
2012-10-11 18:08 ` Daniel Vetter [this message]
2012-10-11 18:08 ` [PATCH 6/6] drm/i915: don't save/restore HWS_PGA reg " Daniel Vetter
2012-10-17 9:32 ` [PATCH 1/3] drm/i915: don't save/restore DP regs " Daniel Vetter
2012-10-17 9:32 ` [PATCH 2/3] drm/i915: don't save/restore irq " Daniel Vetter
2012-10-17 9:32 ` [PATCH 3/3] drm/i915: don't save/restore HWS_PGA reg " Daniel Vetter
2012-10-17 19:52 ` [PATCH 1/3] drm/i915: don't save/restore DP regs " Paulo Zanoni
2012-10-17 20:39 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349978908-7687-6-git-send-email-daniel.vetter@ffwll.ch \
--to=daniel.vetter@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.