[PATCH 3/3] drm/i915: set the LPT FDI RX polarity reversal bit when needed

From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 3/3] drm/i915: set the LPT FDI RX polarity reversal bit when needed
Date: Sat,  1 Dec 2012 12:04:26 -0200	[thread overview]
Message-ID: <1354370666-3802-4-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1354370666-3802-1-git-send-email-przanoni@gmail.com>

From: Paulo Zanoni <paulo.r.zanoni@intel.com>

If we fail to set the bit when needed we get some nice FDI link
training failures (AKA "black screen on VGA output").

While we don't really know how to properly choose whether we need to
set the bit or not (VBT?), just read the initial value set by the BIOS
and store it for later usage.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h  | 2 ++
 drivers/gpu/drm/i915/i915_reg.h  | 1 +
 drivers/gpu/drm/i915/intel_crt.c | 8 ++++++++
 drivers/gpu/drm/i915/intel_ddi.c | 2 ++
 4 files changed, 13 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 65213bc..557843d 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -915,6 +915,8 @@ typedef struct drm_i915_private {
 	bool hw_contexts_disabled;
 	uint32_t hw_context_size;
 
+	bool fdi_rx_polarity_reversed;
+
 	struct i915_suspend_saved_registers regfile;
 
 	/* Old dri1 support infrastructure, beware the dragons ya fools entering
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index acf768d..3f75cfa 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3917,6 +3917,7 @@
 #define  FDI_FS_ERRC_ENABLE		(1<<27)
 #define  FDI_FE_ERRC_ENABLE		(1<<26)
 #define  FDI_DP_PORT_WIDTH_X8           (7<<19)
+#define  FDI_RX_POLARITY_REVERSED_LPT	(1<<16)
 #define  FDI_8BPC                       (0<<16)
 #define  FDI_10BPC                      (1<<16)
 #define  FDI_6BPC                       (2<<16)
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 3084d01..fe20bf7 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -798,4 +798,12 @@ void intel_crt_init(struct drm_device *dev)
 	crt->force_hotplug_required = 0;
 
 	dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;
+
+	/*
+	 * TODO: find a proper way to discover whether we need to set the
+	 * polarity reversal bit or not, instead of relying on the BIOS.
+	 */
+	if (HAS_PCH_LPT(dev))
+		dev_priv->fdi_rx_polarity_reversed =
+		     !!(I915_READ(_FDI_RXA_CTL) & FDI_RX_POLARITY_REVERSED_LPT);
 }
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 3264cb4..4bad0f7 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -180,6 +180,8 @@ void hsw_fdi_link_train(struct drm_crtc *crtc)
 	/* Enable the PCH Receiver FDI PLL */
 	rx_ctl_val = FDI_RX_PLL_ENABLE | FDI_RX_ENHANCE_FRAME_ENABLE |
 		     ((intel_crtc->fdi_lanes - 1) << 19);
+	if (dev_priv->fdi_rx_polarity_reversed)
+		rx_ctl_val |= FDI_RX_POLARITY_REVERSED_LPT;
 	I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
 	POSTING_READ(_FDI_RXA_CTL);
 	udelay(220);
-- 
1.7.11.7
