From: ville.syrjala@linux.intel.com
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 29/33] drm/i915: VGA registers need an offset on VLV
Date: Thu, 24 Jan 2013 15:29:54 +0200 [thread overview]
Message-ID: <1359034198-19678-30-git-send-email-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <1359034198-19678-1-git-send-email-ville.syrjala@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 38 +++++++++++++++++++-------------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index c149426..75b46c8 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -133,25 +133,25 @@
/* VGA stuff */
-#define VGA_ST01_MDA 0x3ba
-#define VGA_ST01_CGA 0x3da
+#define VGA_ST01_MDA (dev_priv->info->display_mmio_offset + 0x3ba)
+#define VGA_ST01_CGA (dev_priv->info->display_mmio_offset + 0x3da)
-#define VGA_MSR_WRITE 0x3c2
-#define VGA_MSR_READ 0x3cc
+#define VGA_MSR_WRITE (dev_priv->info->display_mmio_offset + 0x3c2)
+#define VGA_MSR_READ (dev_priv->info->display_mmio_offset + 0x3cc)
#define VGA_MSR_MEM_EN (1<<1)
#define VGA_MSR_CGA_MODE (1<<0)
-#define VGA_SR_INDEX 0x3c4
+#define VGA_SR_INDEX (dev_priv->info->display_mmio_offset + 0x3c4)
#define SR01 1
-#define VGA_SR_DATA 0x3c5
+#define VGA_SR_DATA (dev_priv->info->display_mmio_offset + 0x3c5)
-#define VGA_AR_INDEX 0x3c0
+#define VGA_AR_INDEX (dev_priv->info->display_mmio_offset + 0x3c0)
#define VGA_AR_VID_EN (1<<5)
-#define VGA_AR_DATA_WRITE 0x3c0
-#define VGA_AR_DATA_READ 0x3c1
+#define VGA_AR_DATA_WRITE (dev_priv->info->display_mmio_offset + 0x3c0)
+#define VGA_AR_DATA_READ (dev_priv->info->display_mmio_offset + 0x3c1)
-#define VGA_GR_INDEX 0x3ce
-#define VGA_GR_DATA 0x3cf
+#define VGA_GR_INDEX (dev_priv->info->display_mmio_offset + 0x3ce)
+#define VGA_GR_DATA (dev_priv->info->display_mmio_offset + 0x3cf)
/* GR05 */
#define VGA_GR_MEM_READ_MODE_SHIFT 3
#define VGA_GR_MEM_READ_MODE_PLANE 1
@@ -163,15 +163,15 @@
#define VGA_GR_MEM_B0000_B7FFF 2
#define VGA_GR_MEM_B0000_BFFFF 3
-#define VGA_DACMASK 0x3c6
-#define VGA_DACRX 0x3c7
-#define VGA_DACWX 0x3c8
-#define VGA_DACDATA 0x3c9
+#define VGA_DACMASK (dev_priv->info->display_mmio_offset + 0x3c6)
+#define VGA_DACRX (dev_priv->info->display_mmio_offset + 0x3c7)
+#define VGA_DACWX (dev_priv->info->display_mmio_offset + 0x3c8)
+#define VGA_DACDATA (dev_priv->info->display_mmio_offset + 0x3c9)
-#define VGA_CR_INDEX_MDA 0x3b4
-#define VGA_CR_DATA_MDA 0x3b5
-#define VGA_CR_INDEX_CGA 0x3d4
-#define VGA_CR_DATA_CGA 0x3d5
+#define VGA_CR_INDEX_MDA (dev_priv->info->display_mmio_offset + 0x3b4)
+#define VGA_CR_DATA_MDA (dev_priv->info->display_mmio_offset + 0x3b5)
+#define VGA_CR_INDEX_CGA (dev_priv->info->display_mmio_offset + 0x3d4)
+#define VGA_CR_DATA_CGA (dev_priv->info->display_mmio_offset + 0x3d5)
/*
* Memory interface instructions used by the kernel
--
1.7.12.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2013-01-24 13:31 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-24 13:29 [PATCH 00/33] drm/915: Get rid of IS_DISPLAYREG() ville.syrjala
2013-01-24 13:29 ` [PATCH 01/33] drm/i915: Convert intel_hdmi to enum port ville.syrjala
2013-01-24 17:49 ` Paulo Zanoni
2013-01-24 13:29 ` [PATCH 02/33] drm/i915: Convert intel_dp " ville.syrjala
2013-01-24 17:54 ` Paulo Zanoni
2013-01-25 12:28 ` Ville Syrjälä
2013-01-24 13:29 ` [PATCH 03/33] drm/i915: Add display_display_mmio_offset to intel_device_info ville.syrjala
2013-01-24 13:29 ` [PATCH 04/33] drm/i915: AUD_VID_DID needs an offset on VLV ville.syrjala
2013-01-24 13:29 ` [PATCH 05/33] drm/i915: Per-pipe PP registers are for VLV only ville.syrjala
2013-01-24 13:29 ` [PATCH 06/33] drm/i915: VLV_VIDEO_DIP_CTL is " ville.syrjala
2013-01-24 13:29 ` [PATCH 07/33] drm/i915: PIPE M/N registers need an offset on VLV ville.syrjala
2013-01-24 13:29 ` [PATCH 08/33] drm/i915: SWF screatch " ville.syrjala
2013-01-24 21:37 ` Daniel Vetter
2013-01-25 12:26 ` Ville Syrjälä
2013-01-25 16:21 ` Daniel Vetter
2013-01-26 16:41 ` Daniel Vetter
2013-01-24 13:29 ` [PATCH 09/33] drm/i915: VGACNTRL needs " ville.syrjala
2013-01-24 21:39 ` Daniel Vetter
2013-01-25 12:21 ` Ville Syrjälä
2013-01-25 16:00 ` Daniel Vetter
2013-01-25 16:22 ` Ville Syrjälä
2013-01-24 13:29 ` [PATCH 10/33] drm/i915: Primary plane registers need " ville.syrjala
2013-01-24 13:29 ` [PATCH 11/33] drm/i915: Pipe " ville.syrjala
2013-01-24 13:29 ` [PATCH 12/33] drm/i915: Cursor " ville.syrjala
2013-01-24 13:29 ` [PATCH 13/33] drm/i915: VLV_DDL is VLV only and needs an offset ville.syrjala
2013-01-24 13:29 ` [PATCH 14/33] drm/i915: DSPFW registers need an offset on VLV ville.syrjala
2013-01-24 13:29 ` [PATCH 15/33] drm/i915: DSPARB register needs " ville.syrjala
2013-01-24 22:01 ` Daniel Vetter
2013-01-25 12:05 ` Ville Syrjälä
2013-01-24 13:29 ` [PATCH 16/33] drm/i915: DPFLIPSTAT and DPINVGTT registers are VLV only and need an offset ville.syrjala
2013-01-24 13:29 ` [PATCH 17/33] drm/i915: Pass VLV_DISPLAY_BASE + reg to intel_init_{sdvo, hdmi, dp} on VLV ville.syrjala
2013-01-24 22:05 ` Daniel Vetter
2013-01-25 12:03 ` Ville Syrjälä
2013-01-25 16:02 ` Daniel Vetter
2013-01-24 13:29 ` [PATCH 18/33] drm/i915: Panel fitter registers need an offset " ville.syrjala
2013-01-24 13:29 ` [PATCH 19/33] drm/i915: PORT_HOTPLUG " ville.syrjala
2013-01-24 13:29 ` [PATCH 20/33] drm/i915: VLV_ADPA must be used in VLV code ville.syrjala
2013-01-24 22:12 ` Daniel Vetter
2013-01-25 11:59 ` Ville Syrjälä
2013-01-24 13:29 ` [PATCH 21/33] drm/i915: Pipe timing registers need an offset on VLV ville.syrjala
2013-01-24 13:29 ` [PATCH 22/33] drm/i915: Pipe palette " ville.syrjala
2013-01-24 22:22 ` Daniel Vetter
2013-01-25 10:57 ` Ville Syrjälä
2013-01-24 13:29 ` [PATCH 23/33] drm/i915: FB_BLC_SELF_VLV is VLV only and needs an offset ville.syrjala
2013-01-24 13:29 ` [PATCH 24/33] drm/i915: VLV doesn't seem to have VGA0/VGA1/VGA_PD registers ville.syrjala
2013-01-24 22:26 ` Daniel Vetter
2013-01-25 10:51 ` Ville Syrjälä
2013-01-24 13:29 ` [PATCH 25/33] drm/i915: PLL and clock gating registers need an offset on VLV ville.syrjala
2013-01-24 22:41 ` Daniel Vetter
2013-01-25 10:51 ` Ville Syrjälä
2013-01-25 16:06 ` Daniel Vetter
2013-01-25 16:20 ` Ville Syrjälä
2013-01-25 16:24 ` Daniel Vetter
2013-01-25 16:28 ` Ville Syrjälä
2013-01-24 13:29 ` [PATCH 26/33] drm/i915: Make VLV_GUNIT_CLOCK_GATE register value more readable ville.syrjala
2013-01-24 13:29 ` [PATCH 27/33] drm/i915: Spell out VLV_DISPLAY_BASE for interrupt registers ville.syrjala
2013-01-24 13:29 ` [PATCH 28/33] drm/i915: DPIO registers are VLV only and need an offset ville.syrjala
2013-01-24 13:29 ` ville.syrjala [this message]
2013-01-24 22:44 ` [PATCH 29/33] drm/i915: VGA registers need an offset on VLV Daniel Vetter
2013-01-25 10:27 ` Ville Syrjälä
2013-01-25 16:18 ` Daniel Vetter
2013-01-25 16:24 ` Ville Syrjälä
2013-01-24 13:29 ` [PATCH 30/33] drm/i915: GPIO/GMBUS " ville.syrjala
2013-01-24 13:29 ` [PATCH 31/33] drm/i915: Set display_mmio_offset for VLV ville.syrjala
2013-01-24 22:59 ` Daniel Vetter
2013-01-24 13:29 ` [PATCH 32/33] drm/i915: Kill IS_DISPLAYREG() ville.syrjala
2013-01-24 13:29 ` [PATCH 33/33] drm/i915: Kill VLV specific interrupts registers ville.syrjala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359034198-19678-30-git-send-email-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.